Routing Equipment
(147 Products)Router Bit Finder
-
CMT part no:CMT300 Dovetail joints give a touch of craftsmanship to your work, but many woodworkers avoid these joints, because of their apparent complexity. CMT's new 305mm (12") dovetail jig is the fast easy solution! Thanks to precise templates, permanent stops and easy adjustments, we have taken the "tinkering" out of the dovetail joinery. Simply clamp your workpiece in with the edges against the factory-set stops, set your bit depth and then you are ready to rout. Also, we haven't cut corners on quality either. This jig features steel body, templates, stops and clamping bars, so it produces perfect long-lasting joints for all your woodworking needs. The machine accepts stock from 11mm (7/16") to 25mm (1") thick, and is capable of producing a variety of joints with the available templates. Standard jig includes a template for 12,7mm (1/2") half blind joints and a template guide. Optional templates are available for through dovetail and box joints. 305mm (12") max length; 11mm (7/16") ~ 25mm (1") joint thickness. STANDARD EQUIPMENT: -standard ¥12,7mm (1/2") silver blind template: CMT300-T128 -¥15,8mmx4mm (5/8" x 5/32") template guide: 899.005.00 Some routers requires a universal base plate to fit the provided template guide. Please check the following optional accessories in the "SPARE PARTS" section: CMT300-SB1 (S=¥8, ¥12mm); CMT300-SB2 (S=¥6,35, ¥12,7mm).In StockList €294.74€195.79Inc Vat €234.95 -
CMT part no:CMT3000 CMT 3000 Ellipse & Circle Cutting Jig for Routers - This product has been designed for cutting ellipses and circles with any router types. You can make ellipses and circles for windows, doors and any other application. By using two slides into the T-slot you can cut ellipses, whereas if you use one slide, you can cut circles. Ellipse and circle cutting jig: - Precise and rapid creation - of ellipses and circles. - Simple setup and effective - operating. - Clamping system for any type - of routers. - Special plastic cross frame with - excellent sliding performance. - Precisely machined T-slots - and steel sliders. - Zinc-coated metal parts to - prevent rust. - Delivered in a carton box along - with instruction manual.Lead Time: 15 DaysList €492.67€215.96Inc Vat €259.15 -
CMT part no:380.081.11 Festool Domino replacement router bit to be used on Domino machines to rout slots on solid wood and wood composites. 380.081.11 D8 I50 L90 M8x1 2 Festool DF700 HW RH TECHNICAL DETAILS: - Premium quality super-strength steel. - Spiral portion coating with black P.T.F.E. - Extra-fine micrograin carbide spiral portion. - 2 cutting edges (Z2). - 2 spiral flutes.In Stock -
-
CMT part no:PGC-B2B Lay two more straight edge clamps on the back of the other pair of straight edge clamps and secure them by using your back-to-back connectors. Fasten the bottom jaw pads to the table top and clamp wood with the top jaw pads. Thanks to the low profile jaws your work surface is never obstructed. The back-to-back straight edge clamps can also be taken apart for making two separate clamps.In StockList €34.18€23.73Inc Vat €28.48
