Acrylic & Composite Cutters
(82 Products)Composite router cutters are cutting tools used for shaping and cutting composite materials, such as fiberglass, carbon fiber, and other composite materials. These materials are commonly used in industries such as aerospace, automotive, and marine.
The main types of composite router cutters are:
- Straight Flute Router Cutters: These cutters have a straight edge and are used for cutting straight lines and edges on composite materials.
- Compression Router Cutters: These cutters have a dual-flute design that compresses the material as it cuts. They are used for cutting both top and bottom edges of composite materials to create a clean and smooth finish.
- Spiral Router Cutters: These cutters have a spiral-shaped flute and are used for cutting a wide range of composite materials, including those with intricate designs and curves.
- Diamond Router Cutters: These cutters have a diamond coating on the tip, which makes them very durable and able to cut through hard materials such as carbon fiber.
- Ball End Router Cutters: These cutters have a rounded tip and are used for cutting curved and rounded shapes on composite materials.
When working with composite materials, it is important to use the appropriate router cutter and to use them safely and correctly. Always follow the manufacturer's instructions and wear appropriate safety gear, such as eye protection and a respirator, to avoid inhaling any dust or particles created during the cutting process.
-
Trend ACRS3/22X1/4TC D=1/4 inch D=6.3 mm C=20 mm Shank Diameter=1/4 inch Overall length=63 mm . Two flute for fine finish. Spec...Lead Time: 5 Days€62.36€74.83As low as €67.34
-
Trend S49/01X1/4STC D=1/4 inch D=6.3 mm C=20 mm OL=51 mm Shank Diameter=1/4 inch . Solid Carbide rasp/burr. Coarse cut. For grindi...Lead Time: 5 Days€51.56€61.87As low as €55.69
-
Trend S49/1X1/4STC D=1/4 inch D=6.3 mm C=20 mm OL=51 mm Shank Diameter=1/4 inch . Solid Carbide rasp/burr. Fne cut. For grinding, ...Lead Time: 5 Days€47.97€57.56As low as €51.80
-
Trend S49/21X3MMSTC D=6.0 C=12.0 OL=44 mm Shank Diameter=3 mm . Tooling for metal, glass reinforced plastic (GRP). plastic and wo...Lead Time: 5 Days€34.78€41.74As low as €37.56
-
Trend S49/22X3MMSTC D=6.0 C=12.0 OL=45 mm Shank Diameter=3 mm . Tooling for metal, glass reinforced plastic (GRP). plastic and wo...Lead Time: 5 Days€37.17€44.60As low as €40.15