Profile Blocks
(94 Products)-
CMT part no:693.100.30 The CMT Euro Spindle Moulder Limitor Cutter Head is supplied in a plastic carry case with one set of straight knives and limitors. A choice of over 150 profiles are kept in stock for immediate despatch, 40mm and 50mm width of knives are available, as well as blanks for custom grinding. CMT cutter heads guarantee a perfect execution for all of your projects. To use on all types of moulder and spindle moulder machines. Technical characteristics: - Cutter head in light aluminium alloy with high tensile strength with limitors - Pair of universal straight knives and limitors - Tools for manual feed MAN - Pins for the automatic positioning of the knives and the limitors - Possibility to use knives with a height of 40mm or 50mm (order no. 690) and limitors (order no. 691) - Built according to the European Normative EN 847-1 CUTTER HEAD WITH LIMITORS D=100X40X30 (ALU)In StockList €280.61€173.88Inc Vat €208.66
-
CMT part no:693.100.31 CMT 100 mm Euro Limitor Cutter Head is supplied in a plastic carry case with one set of straight knives and limitors. A choice of over 150 profiles are kept in stock for immediate despatch, 40mm and 50mm width of knives are available, as well as blanks for custom grinding. CMT cutter heads guarantee a perfect execution for all of your projects. To use on all types of moulder and spindle moulder machines. Technical characteristics: - Cutter head in light aluminium alloy with high tensile strength with limitors - Pair of universal straight knives and limitors - Tools for manual feed MAN - Pins for the automatic positioning of the knives and the limitors - Possibility to use knives with a height of 40mm or 50mm (order no. 690) and limitors (order no. 691) - Built according to the European Normative EN 847-1 CUTTER HEAD WITH LIMITORS D=100X40X31.75 (ALU)In StockList €280.61€173.88Inc Vat €208.66
-
CMT part no:693.078.30 CMT 78mm Euro Limitor Cutter Head Supplied in a plastic carry case with one set of straight knives and limitors. A choice of over 150 profiles are kept in stock for immediate despatch, 40mm width of knives are available, as well as blanks for custom grinding. CMT cutter heads guarantee a perfect execution for all of your projects. To use on all types of moulder and spindle moulder machines. Technical characteristics: - Cutter head in light aluminium alloy with high tensile strength with limitors - Pair of universal straight knives and limitors - Tools for manual feed MAN - Pins for the automatic positioning of the knives and the limitors - Possibility to use knives with a height of 40mm (order no. 690) and limitors (order no. 691) - Built according to the European Normative EN 847-1In StockList €224.48€139.10Inc Vat €166.92
-
CMT part no:694.014.30 These spindle moulder cutter blocks are made by combining two cutter heads, ideal for making furniture doors and drawers. By adjusting the height of the head it is possible to cut two perfectly fitting profiles with no waste of time or efforts to move the fence or to replace the tool. Save money by purchasing one single head and improve your production's efficiency. For use on spindle moulders. Perfect on hardwood and panels with thickness between 22mm and 25mm. Technical details: - Hard aluminium alloy body with high resistance to tensile and yield stress - 2 HWM Knives type (Profile A) 40x24,5x2mm [Z2] - Tools for manual feed MAN - Pins for the automatic positioning of the knives Supplied in a solid plastic box Spare parts as an option: CM695014A pair knives profile A CM695014B pair knives profile B CM695014C pair knives profile C CM695014D pair knives profile D CM69599939 wedge CM99006600 screw CM99106700 alan keyIn StockList €400.04€183.47Inc Vat €220.16
-
CMT part no:694.014.31 These spindle moulder cutter blocks are made combining two cutter heads, ideal for making furniture doors and drawers. By adjusting the height of the head it is possible to cut two perfectly fitting profiles with no waste of time or efforts to move the fence or to replace the tool. Save money by purchasing one single head and improve your production's efficiency. For use on spindle moulders. Perfect on hardwood and panels with thickness between 22mm and 25mm. Technical details: - Hard aluminium alloy body with high resistance to tensile and yield stress - 2 HWM Knives type (Profile A) 40x24,5x2mm [Z2] - Tools for manual feed MAN - Pins for the automatic positioning of the knives Supplied in a solid plastic box Spare parts: CM695014A pair knives profile A CM695014B pair knives profile B CM695014C pair knives profile C CM695014D pair knives profile D CM69599939 wedge CM99006600 screw CM99106700 alan keyIn StockList €400.04€232.64Inc Vat €279.17
-
CMT part no:694.014.35 These are unique products made by combining two cutter heads, ideal for making furniture doors and drawers. By adjusting the height of the head it is possible to cut two perfectly fitting profiles with no waste of time or efforts to move the fence or to replace the tool. Save money by purchasing one single head and improve your production's efficiency. For use on spindle moulders. Perfect on hardwood and panels with thickness between 22mm and 25mm. Technical details: - Hard aluminium alloy body with high resistance to tensile and yield stress - 2 HWM Knives type (Profile A) 40x24,5x2mm [Z2] - Tools for manual feed MAN - Pins for the automatic positioning of the knives Supplied in a solid plastic box Spare tips : CM695014ALead Time: 18 DaysList €400.04€183.47Inc Vat €220.16
-
CMT part no:694.015.30 This versatile spindle moulder cutter set has been designed to make furniture and doors on soft or hardwood. It allows the insertion of five different knives to produce the most popular and classical profiles. The adjustable cutter, included in the set, can also be used individually to carry out grooves from 8mm 15mm thick. For use on spindle moulders. Perfect on solid wood and panels with maximum 48mm (1-7/8") in thickness. Technical details: - Hard aluminium alloy body with high resistance to tensile and yield stress for cutter heads (1 & 2); - Super-strength steel body for cutter head (3) - 2 HWM knives type (A1) 25x29,8x2mm [Z2] CM695015A1 - 2 HWM knives type (A2) 25x29,8x2mm [Z2] CM695015A2 - 4 HWM knives 7,65x12x1,5mm [Z4] CM79007600 - 4 HWM knives 14x14x2m for heads type (1 & 2)TA013273 - 12 spacer rings from 0,1 to 3mm for heads type (1 & 2) - 12 spacer rings from 0,1 to 2mm for heads type (3) - Tools for manual feed MAN - Pins for the automatic positioning of the knives Supplied in a solid plastic box Spare parts: CM695015A1 pair knives 25 x 29.8 x 2mm A1 CM695015B1 pair knives 25 x 29.8 x 2mm B1 CM695015C1 pair knives 25 x 29.8 x 2mm C1 CM695015D1 pair knives 25 x 29.8 x 2mm D1 CM695015E1 pair knives 25 x 29.8 x 2mm E1 CM695015A2 pair knives 25 x 29.8 x 2mm A2 CM695015B2 pair knives 25 x 29.8 x 2mm B2 CM695015C2 pair knives 25 x 29.8 x 2mm C2 CM695015D2 pair knives 25 x 29.8 x 2mm D2 CM695015E2 pair knives 25 x 29.8 x 2mm E2 CM79007600 7.65 x 12 x 1.5mm tips (box 10) CM69599907 6.8 x 11 x 9.5mm tips (box 10) TA013273 14 x 14 x 2mm tips (box 10) CM99006600 screw CM99106700 alan key CM99107300 T25 torx key CM99107200 T20 torx keyIn StockList €1,144.01€520.44Inc Vat €624.53
-
CMT part no:694.015.31 This versatile spindle moulder cutter set has been designed to make furniture and doors on soft or hardwood. It allows the insertion of five different knives to produce the most popular and classical profiles. The adjustable cutter, included in the set, can also be used individually to carry out grooves from 8mm 15mm thick. For use on spindle moulders. Perfect on solid wood and panels with maximum 48mm (1-7/8") in thickness Technical details: - Bore size: d=31.75mm - Hard aluminium alloy body with high resistance to tensile and yield stress for cutter heads (1 & 2); - Super-strength steel body for cutter head (3) - 2 HWM knives type (A1) 25x29,8x2mm [Z2] CM695015A1 - 2 HWM knives type (A2) 25x29,8x2mm [Z2] CM695015A2 - 4 HWM knives 7,65x12x1,5mm [Z4] CM79007600 - 4 HWM knives 14x14x2m for heads type (1 & 2)TA013273 - 12 spacer rings from 0,1 to 3mm for heads type (1 & 2) - 12 spacer rings from 0,1 to 2mm for heads type (3) - Tools for manual feed MAN - Pins for the automatic positioning of the knives Supplied in a solid plastic box Spare parts: CM695015A1 pair knives 25 x 29.8 x 2mm A1 CM695015B1 pair knives 25 x 29.8 x 2mm B1 CM695015C1 pair knives 25 x 29.8 x 2mm C1 CM695015D1 pair knives 25 x 29.8 x 2mm D1 CM695015E1 pair knives 25 x 29.8 x 2mm E1 CM695015A2 pair knives 25 x 29.8 x 2mm A2 CM695015B2 pair knives 25 x 29.8 x 2mm B2 CM695015C2 pair knives 25 x 29.8 x 2mm C2 CM695015D2 pair knives 25 x 29.8 x 2mm D2 CM695015E2 pair knives 25 x 29.8 x 2mm E2 CM79007600 7.65 x 12 x 1.5mm tips (box 10) CM69599907 6.8 x 11 x 9.5mm tips (box 10) TA013273 14 x 14 x 2mm tips (box 10) CM99006600 screw CM99106700 alan key CM99107300 T25 torx key CM99107200 T20 torx keyIn StockList €1,144.01€604.38Inc Vat €725.26
-
CMT part no:694.015.40 These versatile sets have been designed to make furniture and doors on soft and hardwood. It allows the insertion of five different knives to produce the most popular and classical profiles. The adjustable cutter, included in the set, can also be used individually to carry out grooves from 8mm 15mm thick. For use on spindle moulders. Perfect on solid wood and panels with maximum 48mm (1-7/8") in thickness. Technical details: - Hard aluminium alloy body with high resistance to tensile and yield stress for cutter heads (1 & 2); - Super-strength steel body for cutter head (3) - 2 HWM knives type (A1) 25x29,8x2mm [Z2] CM695015A1 - 2 HWM knives type (A2) 25x29,8x2mm [Z2] CM695015A2 - 4 HWM knives 7,65x12x1,5mm [Z4] CM79007600 - 4 HWM knives 14x14x2m for heads type (1 & 2)TA013273 - 12 spacer rings from 0,1 to 3mm for heads type (1 & 2) - 12 spacer rings from 0,1 to 2mm for heads type (3) - Tools for manual feed MAN - Pins for the automatic positioning of the knives Supplied in a solid plastic box Spare parts: CM695015A1 pair knives 25 x 29.8 x 2mm A1 CM695015B1 pair knives 25 x 29.8 x 2mm B1 CM695015C1 pair knives 25 x 29.8 x 2mm C1 CM695015D1 pair knives 25 x 29.8 x 2mm D1 CM695015E1 pair knives 25 x 29.8 x 2mm E1 CM695015A2 pair knives 25 x 29.8 x 2mm A2 CM695015B2 pair knives 25 x 29.8 x 2mm B2 CM695015C2 pair knives 25 x 29.8 x 2mm C2 CM695015D2 pair knives 25 x 29.8 x 2mm D2 CM695015E2 pair knives 25 x 29.8 x 2mm E2 CM79007600 7.65 x 12 x 1.5mm tips (box 10) CM69599907 6.8 x 11 x 9.5mm tips (box 10) TA013273 14 x 14 x 2mm tips (box 10) CM99006600 screw CM99106700 alan key CM99107300 T25 torx key CM99107200 T20 torx keyIn StockList €1,192.93€629.56Inc Vat €755.47
-
7 PIECE MULTIPROFILE CUTTER HEAD SETS WITH LIMITERS 693A The professional woodworker now has the chance to make kitchen doors with a horizontal profile and male-and-female joints with two pairs of cutters. In fact, along with 7 profiled knives these sets also contain a specially designed cutter head that allows the insertion of knives with a height of either 40mm or 50mm, and safety limiters produced in compliance with the European Regulation EN 847-1. Both cutter head and knives are stored in solid plastic cases to prevent damage. These sets include: - 1 cutter head in hard aluminium alloy allowing the insertion of straight knives, limiters and pins for the automatic positioning of the knives; - 7 pairs of knives with 40mm of cutting; - 7 pairs of relative limiters.In StockList €518.04€302.19Inc Vat €362.63
-
CMT part no:693.013.04 7 PIECE MULTIPROFILE CUTTER HEAD SETS WITH LIMITERS 693B This set contains 7 profiles knives and a cutter head for making joints, frames and chamfers. The cutter heads allow the insertion of knives at a height of either 40mm or 50mm. Both cutter head and knives are stored in solid plastic cases to prevent damage. THESE SETS INCLUDE: 1 cutter head in hard aluminium alloy allowing the insertion of straight knives, limiters and pins for the automatic positioning of the knives. 7 pairs of knives with 40mm of cutting. 7 pairs of relative limiters. SUPPLIED IN A STURDY PLASTIC CARRY CASE. Safety limiters are produced in compliance with EU Directive EN 847-1.In StockList €518.04€302.19Inc Vat €362.63
-
CMT part no:694.007.30 These cutter heads are perfect for making furniture, doors and drawer fronts simply and stylishly by giving them a final touch with a CMT cove bit. It is also used for making perfect roundover profiles, drop leaf counters and table tops. You can use three different knives for carrying out roundover and cove profiles with radius 10, 12 and 15mm. For use on spindle moulder machines, double-end tenoner and shaper machines. Perfect on all materials, but ideal on solid wood and panel materials. Technical details: - Hard aluminium alloy body with high resistance to tensile and yield stress - 2 HWM knives radius 10mm (34,8x29,3x2mm) [Z2] - Tools for manual feed MAN - Pins for the automatic positioning of the knives Supplied in a solid plastic box Spare parts: CM69500710 pair R = 10mm knives CM69500712 pair R = 12mm knives CM69500715 pair R = 15mm knives CM69599931 wedge CM99006400 screw CM99106400 alan keyLead Time: 18 DaysList €398.60€183.47Inc Vat €220.16
-
CMT part no:694.007.31 These cutter heads are perfect for making furniture, doors and drawer fronts simply and stylishly by giving them a final touch with a CMT cove bit. It is also used for making perfect roundover profiles, drop leaf counters and table tops. You can use three different knives for carrying out roundover and cove profiles with radius 10, 12 and 15mm. For use on spindle moulder machines, double-end tenoner and shaper machines. Perfect on all materials, but ideal on solid wood and panel materials. Technical details: - Hard aluminium alloy body with high resistance to tensile and yield stress - 2 HWM knives radius 10mm (34,8x29,3x2mm) [Z2] - Tools for manual feed MAN - Pins for the automatic positioning of the knives Supplied in a solid plastic box Spare parts: CM69500710 pair R = 10mm knives CM69500712 pair R = 12mm knives CM69500715 pair R = 15mm knives CM69599931 wedge CM99006400 screw CM99106400 alan keyIn StockList €398.60€146.30Inc Vat €175.56
-
CMT part no:694.003.30 Innovative cutter heads supporting three different knives for making six radius roundover profiles. Standard cutter heads are sold with knives featuring radii 5 and 10mm; two more knife sets are available for radii 4-8mm and 3-6mm. For use on spindle moulder machines, double-end tenoner and shaper machines. Perfect on all materials, but ideal on solid wood and panel materials. Technical details: - Hard aluminium alloy body with high resistance to tensile and yield stress - 2 HWM knives radius 5/10mm (25x24,8x2mm) [Z2] - Tools for manual feed MAN - Pins for the automatic positioning of the knives Supplied in a solid plastic box Spare parts: CM69500305 pair knives r=5/10mm standard CM69599922 wedge CM99006400 screw CM99106400 alan key CM69500304 pair knives r=4/8mm optional CM69500303 pair knives r=3/6mm optional Technioal Specification: D = 113 d = 30 5 = 5/10mm (4/8 and 3/6 optional)Lead Time: 17 DaysList €343.92€169.08Inc Vat €202.90
-
CMT part no:694.003.40 Innovative cutter heads supporting three different knives for making six radius roundover profiles. Standard cutter heads are sold with knives featuring radii 5 and 10mm; two more knife sets are available for radii 4-8mm and 3-6mm. For use on spindle moulder machines, double-end tenoner and shaper machines. Perfect on all materials, but ideal on solid wood and panel materials. Technical details: - Hard aluminium alloy body with high resistance to tensile and yield stress - 2 HWM knives radius 5/10mm (25x24,8x2mm) [Z2] - Tools for manual feed MAN - Pins for the automatic positioning of the knives Supplied in a solid plastic box Spare parts: CM69500305 pair knives r=5/10mm standard CM69599922 wedge CM99006400 screw CM99106400 alan key CM69500304 pair knives r=4/8mm optional CM69500303 pair knives r=3/6mm optional Technioal Specification: D = 113 d = 40 5 = 5/10mm (4/8 and 3/6 optional)Lead Time: 18 DaysList €358.31€207.46Inc Vat €248.95
-
CMT part no:694.005.30 adjustable edge chamfer and radius for spindle moulders - An innovative design, simple assembly and numerous possibilities for perfect edges on boards and natural wood. The CMT adjustable rounding and chamfering sets consist of two pieces, which are very easy to set up on your splindle moulder machine, allowing you to profile on solid wood and man-made boards (with or without coating). It supports five different knives for rounding over both top and bottom edges in one single pass with radius 2,3,4,5 or 6mm, and for 45 degrees chamfering on material from 18mm to 50mm thick. The improved design with shear angle guarantees perfect finishing! For use on spindle moulder machines and double-end tenorers. Technical details: - Hard aluminium alloy body with high resistance to tensile and yield stress - One pair of HWM top knives radius 4mm and 45 degrees chamfer (20x20,5x2mm) [Z2] - One pair of HWM bottom knives radius 4mm and 45 degrees chamfer (20x20,5x2mm) [Z2] - Two HWM knives 50x12x1,5mm - Set of 21 spacer rings from 0,1 to 3mm - Tools for manual feed MAN - Pins for the automatic positioning of the knives Supplied in a solid plastic box Spare parts: CM695005A4 R=4 / 45 degree pair knives top CM695005B4 R=4 / 45 degree pair knives bottom TA012006 50 x 12 x 1.5mm knives CM695005A2 R=2 / 45 degree pair knives top CM695005A3 R=3 / 45 degree pair knives top CM695005A5 R=5 / 45 degree pair knives top CM695005A6 R=6 / 45 degree pair knives top CM695005B2 R=2 / 45 degree pair knives bottom CM695005B3 R=3 / 45 degree pair knives bottom CM695005B5 R=5 / 45 degree pair knives bottom CM695005B6 R=6 / 45 degree pair knives bottom CM69599917 wedge 17 x 11 x 9.5mm CM69599946 wedgee 46 x 11 x 9.5mm CM99006400 screwIn StockList €916.64€418.51Inc Vat €502.21
-
CMT part no:694.005.31 adjustable edge chamfer and radius for spindle moulders - An innovative design, simple assembly and numerous possibilities for perfect edges on boards and natural wood. The CMT adjustable rounding and chamfering sets consist of two pieces, which are very easy to set up on your splindle moulder machine, allowing you to profile on solid wood and man-made boards (with or without coating). It supports five different knives for rounding over both top and bottom edges in one single pass with radius 2,3,4,5 or 6mm, and for 45 degrees chamfering on material from 18mm to 50mm thick. The improved design with shear angle guarantees perfect finishing! For use on spindle moulder machines and double-end tenorers. Technical details: - Hard aluminium alloy body with high resistance to tensile and yield stress - One pair of HWM top knives radius 4mm and 45 degrees chamfer (20x20,5x2mm) [Z2] - One pair of HWM bottom knives radius 4mm and 45 degrees chamfer (20x20,5x2mm) [Z2] - Two HWM knives 50x12x1,5mm - Set of 21 spacer rings from 0,1 to 3mm - Tools for manual feed MAN - Pins for the automatic positioning of the knives Supplied in a solid plastic box Spare parts: CM695005A4 R=4 / 45 degree pair knives top CM695005B4 R=4 / 45 degree pair knives bottom TA012006 50 x 12 x 1.5mm knives CM695005A2 R=2 / 45 degree pair knives top CM695005A3 R=3 / 45 degree pair knives top CM695005A5 R=5 / 45 degree pair knives top CM695005A6 R=6 / 45 degree pair knives top CM695005B2 R=2 / 45 degree pair knives bottom CM695005B3 R=3 / 45 degree pair knives bottom CM695005B5 R=5 / 45 degree pair knives bottom CM695005B6 R=6 / 45 degree pair knives bottom CM69599917 wedge 17 x 11 x 9.5mm CM69599946 wedgee 46 x 11 x 9.5mm CM99006400 screwIn StockList €916.64€334.57Inc Vat €401.48
-
CMT part no:694.003.31 Innovative cutter heads supporting three different knives for making six radius roundover profiles. Standard cutter heads are sold with knives featuring radii 5 and 10mm; two more knife sets are available for radii 4-8mm and 3-6mm. For use on spindle moulder machines, double-end tenoner and shaper machines. Perfect on all materials, but ideal on solid wood and panel materials. Technical details: - Hard aluminium alloy body with high resistance to tensile and yield stress - 2 HWM knives radius 5/10mm (25x24,8x2mm) [Z2] - Tools for manual feed MAN - Pins for the automatic positioning of the knives Supplied in a solid plastic box Spare parts: CM69500305 pair knives r=5/10mm standard CM69599922 wedge CM99006400 screw CM99106400 alan key CM69500304 pair knives r=4/8mm optional CM69500303 pair knives r=3/6mm optional Technioal Specification: D = 113 d = 1 1/4" 5 = 5/10mm (4/8 and 3/6 optional)Lead Time: 18 DaysList €343.92€199.06Inc Vat €238.87