Grooving Saw Blades
(33 Products)
Dado saw blades by CMT : CMT is proud to introduce a brand new LOCKED DADO PRO Set unlike any other!
The CMT 230 Range is the very first Dado ever deemed UNI EN847 COMPLIANT.
This means that while the Dado is rotating, the assembled elements will never come into contact with each other!
This is possible thanks to unique blade body design and ‘never before seen’ special “lock spacers”.
-
CMT part no:230.524.08 CMT 230 series dado set - NOT FOR SALE IN UK / EUROPE CMT thoroughly researched the shortcomings of "standard" dado sets and learned what cabinet makers required most from an "ideal" dado. The result was the superior CMT precision dado, designed with the following features: Anti-kickback design to reduce the possibility of overfeeding that can occur when cutting mass material; Splinter resistant cuts in veneer plywood, melamine and hard and soft woods; Four tooth chippers to keep the cut flat and virtually free from tear out Shim sets included for cuts between 6,35 mm (1/4") and 22.23mm (7/8") TCT Anti-kickback CMT trademark orange PTFE Industrial Coating Exclusive CMT formula and design micrograin carbide tipped teeth Laser cut blade body from 42-44 Rockwell hardness level high - grade German steel CNC tensioned and balanced NB - Make sure your machine is capable of accepting these tools as the weight may affect the motor & braking performance if fitted Suitable guarding must also be usedIn Stock -
CMT part no:230.524.08M NEW & IMPROVED CMT DADO PRECISION SET WITH THE FOLLOWING FEATURES: D203 B15,87 Z24 a-12 degrees Neg. FTG+ATB Chippers: 4x1/8" - Spacer: 2x1/16" Ideal for tongue & groove, shelving and rabbets in solid wood, laminates, melamine & veneered plywood. Orange Shield Coating protects from heat build-up, gumming and corrosion. Innovative Setting Points for chipper alignment. Includes shims and spacers for micro-thin adjustability. No-Anti-kickback design. Compatible with most radial arm saws and stationary table saws, including SawStop?. Read instructions sheet before use (you can also download it from our website). Always use both outside blades. Never use the chippers by themselves, or with only one outside blade. Securely fasten CMT Dado on machine using manufacturer's recommended dado arbor nut.Lead Time: 16 Days€ Enquire€ Enquire -
This is the blade for CNC Routers - not Lamello ZETA Power tools! ZETA Powertools ref part no :CM24060104 CMT Long lasting diamond tipped cutter, Cuts P-System groove for CNC Router. Designed for the precision joiner P-System. Polycristalline diamond teeth ensure unprecedented longevity and versatility. Laser cut nickel plated tempered high carbon steel body is extremely resilient and resistant to the damaging effects of corrosion. Benefit: - Serial processing capability of P-System grooves means improved effectiveness and performance. - Optimum productivity with unchanging standard parts - controlled quality and reproducibility. - Production methods are further enhanced as the same quality groove created with Zeta P2 power tools can also be realized on a CNC machine. This means work pieces can be prepared ahead of time and then assembly completed on-site. Application: P-System for connecting fittings. The connecting fitting is a preferred solution for open shelf units, large pieces of furniture and angled counters, and a popular choice as a general glueing aid for a variety of angles. Frequently used as a visually appealing and premium quality solid joint for high-end products. - Knock down fitting for furniture, shelf units, fitted wardrobes, kitchen manufacturing etc. - Glueing aid for mitres and 45 degrees angles; - Connecting fittings for removable elements in trade booth construc- tion and shopfitting projects; - Great alternative to standard connecting fittings. - Quick and easy prototype construction prior to launch of new furni- ture range. - On-site adjustments and assembly. * Machine CNC D 100.4mm d 30mm Z 3 K 7mm P 4mmIn Stock -
This is the blade for Lamello ZETA Power Tool; not CNC Routers ! Please ref part no : 24060104[M] for CNC CMT Long lasting diamond tipped cutter, Cuts P-System groove for Lamello Zeta jointing machine. Designed for the Lamello ZETA P2 precision jointer P-System. Polycristalline diamond teeth ensure unprecedented longevity and versatility. Laser cut nickel plated tempered high carbon steel body is extremely resilient and resistant to the damaging effects of corrosion. Benefit: - Serial processing capability of P-System grooves means improved effectiveness and performance. - Optimum productivity with unchanging standard parts - controlled quality and reproducibility. - Production methods are further enhanced as the same quality groove created with Zeta P2 power tools can also be realized on a CNC machine. This means work pieces can be prepared ahead of time and then assembly completed on-site. Application: P-System for connecting fittings. The connecting fitting is a preferred solution for open shelf units, large pieces of furniture and angled counters, and a popular choice as a general glueing aid for a variety of angles. Frequently used as a visually appealing and premium quality solid joint for high-end products. - Knock down fitting for furniture, shelf units, fitted wardrobes, kitchen manufacturing etc. - Glueing aid for mitres and 45 degrees angles; - Connecting fittings for removable elements in trade booth construc- tion and shopfitting projects; - Great alternative to standard connecting fittings. - Quick and easy prototype construction prior to launch of new furni- ture range. - On-site adjustments and assembly. * Machine ZETA P2 D 100.4mm d 22mm Z 3 K 7mm P 4mmIn Stock -
CMT part no:240.150.030M Grooving Saw Blade 150x3/2.2x30 Z=36 Flat The new design TCT grooving saw blade with 4 counter sunk holes [4/6.5-12/48] for use with flush mounted arbors on CNC routers or double end tenoner. nominal 5 degree ATB profile gives a near flat bottom to the slot It allows multi-rip grooves using different kerf thickness for grooving cuts or for rebating, chamfering, grooving and profiling as a set of tools. works on soft and hardwood, wood-based panels, plastic.Lead Time: 16 Days -
CMT part no:240.150.040M Grooving Saw Blade 150x4/3x30 Z=36 Z=36 Flat The new design TCT grooving saw blade with 4 counter sunk holes [4/6.5-12/48] for use with flush mounted arbors on CNC routers or double end tenoner. nominal 5 degree ATB profile gives a near flat bottom to the slot It allows multi-rip grooves using different kerf thickness for grooving cuts or for rebating, chamfering, grooving and profiling as a set of tools. works on soft and hardwood, wood-based panels, plastic.In Stock -
CMT part no:240.150.050M Grooving Saw Blade 150x5/3x30 Z=36 Flat The new design TCT grooving saw blade with 4 counter sunk holes [4/6.5-12/48] for use with flush mounted arbors on CNC routers or double end tenoner. nominal 5 degree ATB profile gives a near flat bottom to the slot It allows multi-rip grooves using different kerf thickness for grooving cuts or for rebating, chamfering, grooving and profiling as a set of tools. works on soft and hardwood, wood-based panels, plastic.In Stock -
CMT part no:240.150.060M Grooving Saw Blade 150x6/3x30 Z=36 Flat The new design TCT grooving saw blade with 4 counter sunk holes [4/6.5-12/48] for use with flush mounted arbors on CNC routers or double end tenoner. nominal 5 degree ATB profile gives a near flat bottom to the slot It allows multi-rip grooves using different kerf thickness for grooving cuts or for rebating, chamfering, grooving and profiling as a set of tools. works on soft and hardwood, wood-based panels, plastic.In Stock -
CMT part no:240.020.06R The new design TCT grooving saw blade allows multi grooves and stacked grooves using different kerf thickness for grooving cuts or for rebating, chamfering, grooving and profiling as a set of tools. works on soft and hardwood, wood-based panels, plastic. Diameter 150mm Bore size 35mm No of teeth 12 Kerf 2mmLead Time: 16 Days€ Enquire€ Enquire -
CMT part no:240.030.06R The new design TCT grooving saw blade allows multi grooves and stacked grooves using different kerf thickness for grooving cuts or for rebating, chamfering, grooving and profiling as a set of tools. works on soft and hardwood, wood-based panels, plastic. Diameter 150mm Bore size 35mm No of teeth 12 Kerf 3mm In order to fit d=1 1/4" please select the relevant reducing bush: cm29923300Lead Time: 16 Days€ Enquire€ Enquire
-
- Blade Model: CMT 240 Grooving Circular Saw Blade
- Part Number: 240.040.06R
- Diameter: 150mm
Lead Time: 16 Days€ Enquire€ Enquire -
CMT part no:240.050.06R The new design TCT grooving saw blade allows multi grooves and stacked grooves using different kerf thickness for grooving cuts or for rebating, chamfering, grooving and profiling as a set of tools. works on soft and hardwood, wood-based panels, plastic. Diameter 150mm Bore size 35mm No of teeth 12 Kerf 5mmLead Time: 16 Days€ Enquire€ Enquire
-
CMT part no:240.060.06R The new design TCT grooving saw blade allows multi-rip grooves using different kerf thickness for grooving cuts or for rebating, chamfering, grooving and profiling as a set of tools. works on soft and hardwood, wood-based panels, plastic. Diameter 150mm Bore size 35mm No of teeth 12 Kerf 6mmIn Stock
-
CMT part no:240.030.07R The new design TCT grooving saw blade allows multi grooves and stacked grooves using different kerf thickness for grooving cuts or for rebating, chamfering, grooving and profiling as a set of tools. works on soft and hardwood, wood-based panels, plastic. Diameter 180mm Bore size 35mm No of teeth 18 Kerf 3mmLead Time: 16 Days€ Enquire€ Enquire
-
CMT part no:240.040.07R The new design TCT grooving saw blade allows multi grooves and stacked grooves using different kerf thickness for grooving cuts or for rebating, chamfering, grooving and profiling as a set of tools. works on soft and hardwood, wood-based panels, plastic. Diameter 180mm Bore size 35mm No of teeth 18 Kerf 4mmLead Time: 16 Days€ Enquire€ Enquire
-
CMT part no:240.050.07R The new design TCT grooving saw blade allows multi grooves and stacked grooves using different kerf thickness for grooving cuts or for rebating, chamfering, grooving and profiling as a set of tools. works on soft and hardwood, wood-based panels, plastic. Diameter 180mm Bore size 35mm No of teeth 18 Kerf 5mmIn Stock€ Enquire€ Enquire
-
CMT part no:240.060.07R The new design TCT grooving saw blade allows multi grooves and stacked grooves using different kerf thickness for grooving cuts or for rebating, chamfering, grooving and profiling as a set of tools. works on soft and hardwood, wood-based panels, plastic. Diameter 180mm Bore size 35mm No of teeth 18 Kerf 6mmLead Time: 16 Days€ Enquire€ Enquire
-
CMT part no:240.008.04 CMT 240 series biscuit jointer saw blade is a 4" biscuit joiner blades featuring CMT's trademark PTFE Industrial coating make biscuit joints quickly and easily. Highgrade German steel and 8 micrograin carbide-tipped teeth guarantee years of use. These blades fit Lamello?, Dewalt?, Porter-Cable?, Skil?, Bosch? Freud? and other popular biscuit joiner models. 241.008.04 IS FOR VIRUTEX?, FITS OLDER PORTER CABLE? MACHINES & LAMELLO? BISCUIT JOINERS.In Stock -
CMT part no:241.008.04 CMT 240 series biscuit jointer saw blade The 4" biscuit joiner blades featuring CMT's trademark PTFE Industrial coating make biscuit joints quickly and easily. Highgrade German steel and 8 micrograin carbide-tipped teeth guarantee years of use. These blades fit Lamello?, Dewalt?, Porter-Cable?, Skil?, Bosch? Freud? and other popular biscuit joiner models. 241.008.04 IS FOR VIRUTEX?, FITS OLDER PORTER CABLE? MACHINES & LAMELLO? BISCUIT JOINERS.In Stock -
CMT is proud to introduce a brand new LOCKED DADO PRO Set unlike any other! D=203 B=15.88 Z=12 a=12-neg FTG+ATB This is the very first Dado ever deemed UNI EN847 COMPLIANT. This means that while the Dado is rotating, the assembled elements will never come into contact with each other! This is possible thanks to unique blade body design and 'never before seen' special "lock spacers". FEATURES: For flat bottom grooves & virtually splinter-free cuts in solid wood, laminates & melamines, veneer plywood. ORANGE SHIELD COATING protect from heat, gumming and corrosion. Includes shims (plastic & magnetic) and plastic ''lock spacers'' set for micro-thin adjustability.In Stock
