Prostop Digital Stop System 1200mm System
ProStop is a complete digital stop and fence system which can be used for sawing, cutting, routing and shaping applications. It includes the fence, flip-stop and digital measuring system.
Puts an end to inaccurate tape measurements and repeatability problems.
Repeatable to 0.02mm (0.001 inches).
Can be used on the left or right of the saw.
Dual Measurements: With ProStop's display, you can position your system in absolute mode, switch to incremental mode for relative positioning, and return to the absolute mode with no loss of measurement or accuracy.
Scalability: The system supports multiple stop assemblies on the same fence.
Easy Operation: Front panel settings for Zero, Plus & Minus Offsets, and Units Mode.
Choice of Measurement Mode: Digital Displays will display readings in Millimeters, Centimeters, Decimal inches or Fractions (fractions can be displayed in 16ths, 32nds, or 64ths).
Battery Power: Two AA batteries last six months (average); no power wires to install/maintain.
Two year warranty for defects in workmanship.
Download Product Catalog
ProStop Parts List
ProStop Systems Come With:
A digital scale (affixed to the fence) with a measuring range between 1.3m and 6.0m. Standard measuring ranges are: 1.3m (50 inches), 2.4m (94 inches), 2.9m (114 inches), 5.9m (235 inches). Custom lengths may be ordered up to 6m.
A readhead (position sensor) with a 30mm (12 inches) cable length. Custom cable lengths may be ordered up to 10m (30 feet).
A General Purpose Digital Display.
A sliding flip-stop assembly.
Installation hardware consisting of four hex nuts and four hex head bolts (ProStop mounts from the bottom).