Pressing Machines
(83 Products)
Press Technology has advanced markedly over the past decade and with a wider array of products than ever before our experience matters. You can improve your efficiency, product and flexibility through investing in Press Technology. We supply a wide range of pressing machines for wood, veneers, carbon fibre, composites and assembly. Typical woodworking presses will provide different solutions be it heated, cold, vacuum, or frame we have the press suitable for the requirement. If you would like advice please call one of our specialists to help you get the best performance & solution for your application. Our machinery showroom near London, has the largest range of New & Used woodworking equipment on display in the UK.
-
Our 16m3 per hour system has its vacuum pump mounted on a chassis fitted with castors to allow easy movement around the workshop. It is supplied with a 300 micron seamless polyurethane bag measuring 1300mm x 2500mm. This system also comes with a footswitch assembly to allow you to turn the pump on and off whilst leaving both hands free to position your work in the bag. Technincal Specification: Vacuum flow rate - 16m3 per hour Vacuum level - 85% - 8.5 tonnes per m2 No of ports/format - four ports, castored plywood trolley Standard bag size - one bag @ 1300mm x 2500mm Maximum bag size - four bags @ 1300mm x 3500mmLead Time: 30 Days€2,208.86€2,650.63 -
Our 25m3 per hour system has its vacuum pump mounted on a chassis fitted with castors to allow easy movement around the workshop . It is supplied with a 300 micron seamless polyurethane bag measuring 1300mm x 2500mm This system also comes with a footswitch assembly to allow you to turn the pump off and on whilst leaving both hands free to position you work in the bag. Technincal Specification: Vacuum flow rate - 25m3 per hour Vacuum level - 85% - 8.5 tonnes per m2 No of ports/format - four ports, castored plywood trolley Standard bag size - one bag @ 1300mm x 2500mm Maximum bag size - four bags @ 1300mm x 3500mmLead Time: 30 Days€2,525.44€3,030.53 -
Our 40m3 per hour system has its vacuum pump mounted on a chassis fitted with castors to allow easy movement around the workshop. It is supplied with a 300 micron seamless polurethane bag measuring 1300mm x 2500mm. The system also comes with a footswitch assembly to allow you to turn the pump off and on whilst leaving both hands free to position your work in the bag. Technincal Specification: Vacuum flow rate - 40m3 per hour Vacuum level - 85% - 8.5 tonnes per m2 No of ports/format - eight ports, castored plywood trolley Standard bag size - one bag @ 1300mm x 2500mm Maximum bag size - eight bags @ 1300mm x 3500mmLead Time: 30 Days€3,791.76€4,550.11 -
This is our most popular professional system and is, like its little brother, fitted with an industrial quality vacuum pump that is designed for 100% duty cycle, in other words you can just leave it running. This system develops a vacuum level of around 85% which equates to over 8.5 tones per square metre. It is supplied with a 300 micron seamless polyurethane bag, two sealing strips and a footswitch assembly, enabling you to turn the pump on and off whilst keeping both hands free to position your work in the bag. The bag can be upgraded to a larger PVC one or a seamless one made of polyurethane, a material that is substantially stronger and more puncture resitant than PVC and which doesn't stiffen at low temperatures. The higher flow rate of this systems pump means that it can be used for vacuum templating on a router table and for securing vacuum straight edges and trimming jigs. Technincal Specification: Vacuum flow rate - 8m3 per hour Vacuum level - 85% - 8.5 tonnes per m2 No of ports/format - one port, desk top plywood frame Standard bag size - one bag @ 1300mm x 2500mm Maximum bag size - two bags @ 1300mm x 3000mmLead Time: 15 DaysList €1,358.41€1,025.29Inc Vat €1,230.35 -
The Dynma Box press has quick setting and is ideal for assembling drawer and door frames with wide variety of sizes. The functional design allows you to assemble panels and strips for different types of joint (folding, through, with dovetails and dowels), and it will result in the perfect joint. The lateral pressing mechanism, with it's forward limited system, FLS, is especially useful in not distorting folding joints and assembling frames with glass components. The precision linear guides together and innovative lateral press position system reduces the adjustment time and maintenance rates. Technical Specicfication: Max lateral press strength 800 kg Max vertical press strength 800 kg Max working pressure 8 bar Air consumption 5 NI/min Weight 600KG Working Sizes: --------------- Max. / Min. (X): 1.400 / 200 mm. Max. / Min. (Y) : 800 / 210 mm. Max. (Z) / Max. (V): 200 / 35 mmLead Time: 90 Days€ Enquire -
Pneumatic universal presses range for drawers, doors and frames assembly. This family of manual presses are equipped with cylinders with a quick adjustment. Its studied mechanism for fixing on the work surface, allows you a quickly change the position of the same to suit the geometry of the part. The use of a single fix bolt will allow you to adjust the cylinders in any direction. This system allowe you to press curved pieces also. It is posible optionally in horizontal format. Overall Dimensions: -------------------- Length: 3300 / 3600 mm. Height: 2000 / 2100 mm. Width: 1100 / 1200 mm. Max. Press Strength -------------------- Vertical: 600 / 600 kg. Lateral: 400 / 600 kg. Working Sizes: -------------- Max. (X): 2550 / 2800 mm. Max. (Y): 1050 / 1500 mm. Max. (Z): 120 mm -Dimensions of working place 2550mm X 1050mm -Iron lateral and inferior fences 120mm -3 Vertical pneumatic cylinder of ¥63 -2 Lateral pneumatic cylinder of ¥63 -Maximum strength per cylinder 200 Kg -The use of a single fix bolt will allow you to adjust the cylinders in any direction (0º-180º). This system allows you to press curved pieces also -2 Hand lever control. One for lateral group and other for vertical group. -2 Pressure regulators, 2 pressure indicators and 1 air service unit.Lead Time: 90 Days€10,786.49€12,943.79 -
- Table dimension : 2435 x 1440 mm
- Table usage area : 2275 x 1230 mm
- Maximum workpiece height : 90mm
Lead Time: 60 Days€ Enquire -
- Hot air oven and vacuum membrane press in one machine
- Usable for woodworking and thermoforming
- Suitable for preheating Solid Surface materials, thermoplastics and similar
Lead Time: 60 Days€ Enquire -
AUTOMATIC AIR MEMBRANE PRESSES FOR 3-D LAMINATION Model 14.5-28 Highest quality of the end product, extremely fast cycles, quick production changes, unparalleled user-friendliness. Such are the targets that we had in mind when we designed this range of air membrane presses for thermoforming materials (PVC, PPE, ABS, TRANSFER FOILS; etc.) or natural veneers. Estrema is available as a membrane or membrane-less version and can be supplied with one, two,three trays with manual or automatic movement. The trays can be equipped with the exclusive Italpresse PSS (PIN SUPPORT SYSTEM) that completely eliminates the need for panel raisers and accelerates the production changes. FEATURES: Membrane and membrane-less cycles: possibility to choose among many membrane, membrane-less and high-gloss cycles. Top heating platen with direct electric heating and oil circulation for a higher degree of temperature uniformity. Maximum platen temperature up to 150 degreesC. High thickness monolithic steel bottom platen. Touch-screen color operator interface with possibility to set and store working programs. PSS (PIN SUPPORT SYSTEM) (optional) AN EXCLUSIVE ITALPRESSE SOLUTION TO COMPLETELY ELIMINATE THE NEED OF PANEL RAISERS. In recent years, the exclusive ITALPRESSE PSS (PIN SUPPORT SYSTEM) has had an incredible success with our customers, who give enthusiastic comments about how easy to use is this system without compromising the product quality. It's by far faster and more efficient than any magnetic or 'add-on' device and it saves a lot of money if compared with a full blown scanner pin system. The working tray is completely filled with square pins. With a simple push of the pins around the panel, they go down, leaving the panel correctly raised over the working table. When you need to change the dimensions of the panels, all the pins can be re-set to the up position while the tray exits the press. A special surface finish of the top face of the pins prevents any shifting of the panels during the whole cycle. Another advantage is that you don't need to put 'blocks' around the isolated panels because the pins have a 'self-blocking' effect saving the quality of panel edges and corners. Model 14.5-28 Platen Dimension 1450x2800mm (57"x110") Inside frame dimension 1330x2680mm (52"x106") Thrust 260 Ton Hydraulic Group Power 4 Kw Maximum Platen Temp 150c degLead Time: 113 Days€ Enquire -
Frame clamping presses by Italpresse are indispensable for assembling door and window frames, including solid doors, french windows, indoor and outdoor shutters and numerous other types of frames. Italpresse's vast range of clamping presses meet the production requirements of all categories of customers, from small businesses to large manufacturers. The basic configuration of each clamping press can be adapted by a series of options and sizes. High manufacturing accuracy is guaranteed by superior-quality mechanical components and numerous NC machining processes. Features: Vertical-horizontal adjustable thrust "FALCON/2000" No. 2 horizontal cylinders for frame squaring No. 2 vertical cylinders for horizontal cross-beam movement No. 2 horizontal fences with quick lock Horizontal and vertical movements by electrovalves Lower beam adjustable in three (or five) positions: Automatic locking-unlocking of the lower beam Possibility of choice among three working cycles from the control panel -automatic cycle; -special cycle for the impulse control of the upper cross-beam; Electronic pressing timer -manual cycle; No. 2 safety electric eyes CE SAFETY STANDARDS mm. 420/720/1020/1170/1320 (in. 18/28/40/46/52) for model mm. 3500x2500 (in. 139x98) mm. 420/720/1020 (in. 18/28/40) for model mm. 3500x2000 (in. 139x79) mm. 380/680/980 (in. 15/27/39) for model mm. 3000x1700 (in. 118x67) and mm. 3000x2000 (in. 118x79) Min Useful Dimension (mm) Mod. Internal Dimension (mm) Max Horizontal Thrust (mm) Max Vertical Thrust (mm) Horizontal Cylinders Diameter (mm) Vertical Cylinders Diameter (mm) Hydraulic Power Group (Kw) Vertical Cylinders Stroke (mm) Horizontal Cylinders Stroke (mm) FALCON/S FALCON/2000 3000X1700 3000X1700 250X340h 250X340h 2400 3200 19000 19000 50/35 50/35 100/60 100/60 3 3 800 800 1.200 1.200 FALCON/S FALCON/2000 3000X2000 3000X2000 250X340h 250X340h 2400 3200 19000 19000 50/35 50/35 100/60 100/60 3 3 1.100 1.100 1.200 1.200 FALCON/S FALCON/2000 3500X2000 3500X2000 250X340h 250X340h 2400 3200 19000 19000 50/35 50/35 100/60 100/60 3 3 1.100 1.100 1.450 1.450 FALCON/S FALCON/2000 3500X2500 3500X2500 250X340h 250X340h 2400 3200 19000 19000 50/35 50/35 100/60 100/60 3 3 1.300 1.300 1.450 1.450 Options: 01 PENDANT PUSH-BUTTON STRIP 02 HORIZONTAL UPPER AND LOWER BEAMS 02 and fence plates covered with special high resistance plastic 02 material 03 BAR FOR SHUTTERS WITH PINS complete with micrometric adjustment for the centering of the pieces (pitch upon request) useful length mm 2600/3100 not compatible with the optionals 10-11(frame pre-assembling devices) 04 BAR FOR SHUTTERS WITH PINS complete 04 with micrometric adjustment for the 04 centering of the pieces-electronic 04 cycle (pitch upon request) useful 04 length mm. 2600/3100 05 BAR IN TWO PARTS WITH VARIABLE PITCH for shutters assembling complete with supports fitting included height will be increased of mm. 60 06 SPECIAL DEVICE TO PRESS OBLIQUE AND 06 TRIANGULAR FRAMES, complete with: 06 no. 3 alu-jointed supports 06 no. 2 plastic spacers 07 CYLINDER AND RELATIVE HORIZONTAL FENCE for frames with central cross bar for frame press of mm. 3000 The height will be increased to mm. 490 08 CYLINDER AND RELATIVE HORIZONTAL 08 FENCE for frames with central cross 08 bar for frame press of mm. 3500 08 The height will be increased to mm. 08 490 09 EXTRA CHARGE FOR CYLINDER AND RELATIVE HORIZONTAL FENCE if supplied with optional 10 or 11 10 FRAME PRE-ASSEMBLING DEVICE 10 composed of 8 air cylinders mounted 10 on adjustable brackets (in this 10 case the minimum useful height will 10 be increased of mm. 100 with max.) 11 FRAME PRE-ASSEMBLING DEVICE composed of 10 air cylinders. 8 cylinders mounted on adjustable brackets + 2 fixed cylinders, one on top and one on bottom beams. (In this case the minimum useful height will be increased of mm 100) 12 AUTOMATIC POSITIONING by reading of 12 the pieces in horizontal and vertical 13 ELECTRIC CONTACTS PRESSURE GAUGE for adjustment of horizontal cylinders pressure 14 AUTOMATIC POSITIONING OF THE UPPER 14 CROSS-BEAM to lock the frame-pieces 14 then the upper cross-beam goes up 14 to the final height. Recommended 14 for mod. mm 3000x2000 and 3500x2500 14 only if they are equipped with 14 optionals 12 or 15 and 10 or 11 15 ELECTRONIC UNIT CONTROL with microprocessor. The keyboard sets automatically the frame height while an electronic-eye reads its lengthLead Time: 113 Days€ Enquire -
IBL Custom made hydraulic presses for any application, with the following specs: * Weld-free steel ring frame * Massive solid steel drilled platens with oil or water channels * Number of openings from 1 to 50 * Loading on the front * Platen dimensions from mm. 1000 x 1000 up to mm. 3000 x 10000 * Welded or cast steel hydraulic cylinders, with thickness chromed pistons * Oil, water or steam heating * Control board includedLead Time: 113 Days€ Enquire -
Flame cut RING-FRAME HYDRAULIC PRESS - SIDE LOADING - MOD. "IBN" IBN Custom made hydraulic presses for any application, with the following specifications: * Weld-free steel ring frame * Massive solid steel drilled platens with oil or water channels * Number of openings from 1 to 50 * Loading on the side * Platen dimensions from mm. 1000 x 1000 up to mm. 3000 x 10000 * Welded or cast steel hydraulic cylinders, with thickness chromed pistons * Oil, water or steam heating * Control board includedLead Time: 113 Days€ Enquire -
- Height min/max . . 250 - 1300 mm
- Length min/max . . 250 - 2500 mm
- Depth max . . . . . 700 mm
Lead Time: 113 Days€ Enquire -
LISTEMAC ROTARY CLAMP FOR LAMINATING WOOD EDGES * rotation of the working table 360 degrees * working table each one with mechanical stop * activated by foot control no. 3 * each single table is provided with 3 independent working stations * independent manual pneumatic valves no. 9 * thrust cylinders (6 each working table) no. 18 * upper press bar (3 each working table) with independent movement by pneumatic cylinders, acted simultaneously with correspondent vertical thrust cylinders no. 9 * filter lubricator unit * vertical thrust cylinders provided with air regulation valves * thrust of each vertical cylinder at 8 bars Kg 400 * hand-wheel gear for the manual turning of the machine * frontal pressure bars opening speed setting valve (1 each cylinder) - CE SAFETY STANDARDS WORKING DIMENSIONS mm 2500x1200 or mm. 3000x1200 OPTIONS - MOTORIZED ROTATION - CROSS BEAM AND ADDITIONAL PNEUMATIC CYLINDER - ADDITIONAL PNEUMATIC UPPER PRESS BARLead Time: 113 Days€ Enquire -
- Mod. 3017
- Internal 3000x1700mm
- Min Internal Dimensions 250x340 mm
Lead Time: 113 Days€ Enquire -
Frame clamping presses by Italpresse are indispensable for assembling door and window frames, including solid doors, french windows, indoor and outdoor shutters and numerous other types of frames. Italpresse's vast range of clamping presses meet the production requirements of all categories of customers, from small businesses to large manufacturers. The basic configuration of each clamping press can be adapted by a series of options and sizes. High manufacturing accuracy is guaranteed by superior-quality mechanical components and numerous NC machining processes. Features: Adjustable vertical/horizontal pressure 2 vertical hydraulic cylinders for top beam 2 horizontal hydraulic cylinders for squaring 2 quick-setting horizontal stops Lever controlled hydraulic operate movements Min Useful Dimensions w250 x h340 mm Options Pendant push-button control Horizontal upper and lower beams and fence plates covered with special high resistance plastic material Bar for shutters with pins complete with micro adjustment for the proper setting of the pitch Special device to press oblique and triangular framesLead Time: 113 Days€ Enquire -
- Platen dimensions 3000 x 1300mm (opt.2500mm)
- No of platens 2
- No of daylights 1
Lead Time: 113 Days€ Enquire -
SDE Hydraulic frame clamp with adjustable cylinders Frame clamping presses by Italpresse are indispensable for assembling door and window frames, including solid doors, french windows, indoor and outdoor shutters and numerous other types of frames. Italpresse's vast range of clamping presses meet the production requirements of all categories of customers, from small businesses to large manufacturers. The basic configuration of each clamping press can be adapted by a series of options and sizes. High manufacturing accuracy is guaranteed by superior-quality mechanical components and numerous NC machining processes. Features; Counterbalanced cylinder positioning Three moving vertical beams with top cylinder and one adjustable bottom stop One vertical beam with 2 horizontal cylinders Left fixed vertical beam with two stops Hydraulic unit power Kw. 1,5 Lever controlled valves for cylinder activation Min Useful Dimensions w250 x h340 mm Model Capacity IPSDE3017 3000 x 1700 IPSDE3020 3000 x 2000 IPSDE3525 3500 x 2500 Options: Hydraulic Lock For The Horizontal Cylinder Beam Overhead Hanging Control Panel One Additional Sliding Vertical BeamLead Time: 113 DaysList €17,662.09€12,510.65Inc Vat €15,012.78 -
SDE Hydraulic frame clamp with adjustable cylinders - Frame clamping presses by Italpresse are indispensable for assembling door and window frames, including solid doors, french windows, indoor and outdoor shutters and numerous other types of frames. Italpresse's vast range of clamping presses meet the production requirements of all categories of customers, from small businesses to large manufacturers. The basic configuration of each clamping press can be adapted by a series of options and sizes. High manufacturing accuracy is guaranteed by superior-quality mechanical components and numerous NC machining processes. Features; Counterbalanced cylinder positioning Three moving vertical beams with top cylinder and one adjustable bottom stop One vertical beam with 2 horizontal cylinders Left fixed vertical beam with two stops Hydraulic unit power Kw. 1,5 Lever controlled valves for cylinder activation Min Useful Dimensions w250 x h340 mm IPSDE3020 3000 x 2000 Options: Hydraulic Lock For The Horizontal Cylinder Beam Overhead Hanging Control Panel One Additional Sliding Vertical BeamLead Time: 113 DaysList €16,213.19€12,960.16Inc Vat €15,552.19 -
- Length Options 3000, 3500 mm
- Height Options 1700, 2000, 2500mm
- Total Thrust 3230 kg
Lead Time: 113 DaysList €18,765.97€14,414.44Inc Vat €17,297.33 -
The P series are hot or cold presses with automatic loading, pressing and unloading of the panels. Thanks to years of experience in designing and developing continuous presses for the wood industry, ITALPRESSE now offers a huge range of models with specific features designed to meet different production requirements for the wood, plastics and metal-working industries. The most common application involves gluing a coating (veneer, lamina, paper, melamine, PVC, etc.) onto a substratum (MDF, hardboard, plywood, hollow panels, blockwood, etc.). This method is used to make panels for furniture, walls, floors, doors, etc. The basic configuration of the pressing line is comprised of a feed belt, an automatic press and a discharge deck. This configuration can be completed with numerous optionals, such as glue spreaders, polishers, automatic feeders, disk, roller or belt conveyors, automatic assembling stations, panel turners and stackers. Lines with various degrees of automation can be supplied right up to fully automatic lines that do not require direct intervention by the operator. Presses come in various sizes and with various powers/pressures, with closing from above or below, and longitudinal or transversal infeed. They can be configured at will thanks to a large number of optional devices that can be used to adapt the press to your personal requirements. High manufacturing accuracy is guaranteed by superior-quality mechanical components and numerous NC machining processes. Features: * Weld free steel ring frame, CNC machined * Available standard platen dimensions:: mm. 2500 x 1400 mm. 2500 x 1900 mm. 3000 x 1400 mm. 3000 x 1900 mm. 3300 x 1400 mm. 3300 x 1900 * Opening between platens mm. 140 * Top-down platen stroke * Specific pressure Kg/cmq. 5-7 * Pressure cylinders diameter mm. 100 * Movement cylinders * Cylinder stroke mm. 140 * Adjustable pressure gauge * Automatic pressure recovery * Adjustable opening * Fast closing with slow-down for pressing * Torsion rods for platen parallelism and flatness control * Cylinder insulating steel platesLead Time: 113 Days€ Enquire -
- Useful length min/max: mm. 300/2500
- Useful heigth min/max mm. 300/1300
- Useful depth min/max mm. 250/650
Lead Time: 113 Days€ Enquire -
- platens dimensions: mm. 2500 x 1300
- dailight: mm. 400
- loading on sight mm. 2500
Lead Time: 113 Days€ Enquire -
- Maximum Dimensions 4000 x 2500mm
- Minimum Dimensions 250 x 450 mm
- Total Thrust 21000 kg
Lead Time: 113 Days€ Enquire -
- Length Options 3000, 3500 mm
- Height Options 1700, 2000, 2500mm
- Minimum Dimensions 250 x 340 mm
Lead Time: 113 Days€ Enquire -
- Length Options 3000, 3500 mm
- Height Options 1700, 2000, 2500mm
- Minimum Dimensions 250 x 340 mm
Lead Time: 113 Days€ Enquire -
ITALPRESSE have introduced the new V8 through feed presses with automatic loading, it brings economical, efficient pressing to medium sized workshops. No need to manually load the press opening: the panels are laid-up on a preparation belt outside the press, and then automatically driven onto the press platen by a simple touch of a button. The main benefits of this solution are: - reduced cycle times - increased productivity - easy operating with Touch Screen Control - no need to lift & push the panels in & out Features: A) AUTOMATIC LOADING BELT - Tough - Made of synthetic nylon reinforced cloth - Loading speed synchronized with press belt - Loading automatically controlled by photocells B) AUTOMATIC PRESS - Platen dimensions mm. 3000 x 1300 [other sizes available for example, 2500 x 1300mm, 3200 x 1600mm, 3500 x 1300mm] - Platens no. 2 - Daylights no. 1 - Cylinders stroke and opening mm. 300 - Upstroke movement of the platens - Platens heated by oil from integral electric boiler -N.8 cylinders of 70 mm - Total thrust 120 tons - Hydraulic pump from German HAwe Company - Automatic reset of the pressure - Motorised loading mylar belt into the press - Self lubricating guides, diagonally - Racks & pinion for parallel platen movement - TOUCH SCREEN TS 500 * Electronic flatness control device Computerize interface to control all press functions model "TS 500" : - 5,7 colour "TOUCH SCREEN" monitor for the setting, storing end monitoring all cycle parameters - timer for automatic opening of the press at the end of the pressing cycle - digital temperature control - digital pressure control with automatic control of the laminating pressure according to operator entered panel dimensions - daily/weekly timer for automatic start-up and shutdown of the heating unit - automatic pressure commutation for the panel dimensions - fault diagnostic system - memory for 200 working program - Foot control for forward-backward belt mouvement and for automatic cycle star - CE SAFETY STANDARDS: - Safety rope around loading belt - Grids on the left and right press sides - Safety bolts to lock the mobile platen for maintenance EXCLUSION OF LEFT AND RIGHT ROWS OF CYLINDERS C) FREE ROLLER UNLOADING TABLE Placed back press side With these new models, ITALPRESSE is offering an affordable solution for automatic loading and unloading of the classical hot press. The line can be built up to have full laminating cell including scissor lift, brushing, glue spreading.Lead Time: 113 Days€ Enquire -
- Platen dimensions 3800 x 1600mm
- No of platens 2
- No of daylights 1
Lead Time: 113 Days€ Enquire -
- Platen dimensions 4200 x 1600mm
- No of platens 2
- No of daylights 1
Lead Time: 113 Days€ Enquire -
- Platen dimensions 5000x1600mm
- Heated platens 2
- Openings 1 nr
Lead Time: 113 Days€ Enquire -
- Platen dimensions 2500 x 1300mm
- No of platens 2
- No of daylights 1
Lead Time: 113 Days€ Enquire -
ItalPresse XL4 Cold Hydraulic Upstroke Press - is a high quality small at an economical price. Italpresse have invested many hours in the design and the end result is a robust press, the latest technology in PLC control together with a completely revised method of manufacture. The main frame and component are machined using CNC machining centres.This coupled with mass production of standard size machines, Italpresse have achieved their aim of reducing prices while improving quality. As standard this model comes with PLC control and diagnostics for general fault finding. Features: - Computerised control of the pressing functions - Pressing timer with automatic opening & manual override - Digital display & control of working pressure - Timer for startup in morning - Diagnostics with digital display - Automatic reset of hydraulic pressure Platen dimension : 1300 x 1300mm Total thrust : 50 T Daylight : ONE Daylight opening : 400mm No.4 cylinder of : 70mm Hydraulic unit : 2,2 Kw COLD Press : Yes Platens covered with welded steel plate.Lead Time: 113 Days€ Enquire -
- Platen dimensions 2500 x 1300mm
- No of platens 2
- No of daylights 1
Lead Time: 113 Days€ Enquire -
- Platen dimensions 2500 x 1300mm
- No of platens 5
- No of daylights 4
Lead Time: 113 Days€ Enquire -
- Platen dimensions 2500 x 1300mm
- No of platens 5
- No of daylights 4
Lead Time: 113 Days€ Enquire -
- Platen dimensions 3000 x 1300mm
- No of platens 6
- No of daylights 5
Lead Time: 113 Days€ Enquire -
- Platen dimensions 2500 x 1300mm
- No of platens 5
- No of daylights 4
Lead Time: 113 Days€ Enquire -
- Platen dimensions 2500 x 1300mm
- No of platens 5
- No of daylights 4
Lead Time: 113 Days€ Enquire -
- Platen dimensions 3000 x 1300mm
- No of platens 2
- No of daylights 1
Lead Time: 113 Days€ Enquire -
- Platen dimensions 3200 x 1600mm
- No of platens 2
- No of daylights 1
Lead Time: 113 Days€ Enquire -
- Platen dimensions 3500 x 1300mm
- No of platens 2
- No of daylights 1
Lead Time: 113 Days€ Enquire -
- Platen dimensions 3800 x 1600mm
- No of platens 2
- No of daylights 1
Lead Time: 113 Days€ Enquire -
- Platen dimensions 4200 x 1400mm
- No of platens 2
- No of daylights 1
Lead Time: 113 Days€ Enquire -
- Platen dimensions 3500 x 1300mm
- No of platens 2
- No of daylights 1
Lead Time: 113 Days€ Enquire
