Glue Spreaders
(19 Products)
Glue spreaders limit waste improve productivity and finish when applying adhesives to panels: chipboard, MDF or plasterboard; panels to be clad with thin veneer, smooth laminates, thin aluminium sheets, etc. You can get even more from your investment, by integrating spreading machinery with the suitable conveyor system typically knife edge rollers are available in a variety of sizes from 3000mm long to 1600mm wide.
-
A glue spreader can speed up production, improve quality and reduce adhesive consumption for a relatively small investment. The Osama range of spreaders are built in Italy to an exceptionally high standard these 2 roller glue spreaders offer many benefits over hand glue spreading. As well as an increased in output over hand spreading, the volume of glue applied can be accurately regulated offering big savings in glue consumption. Accurate spreading also means less glue is squeeze out at the edge of panels resulting in easier trimming operation, saving time. All machines can apply double or single faced adhesive. Included in the specification is a manual wash system which when connected to a hose pipe directs water directly onto the rollers via nylon brushes. reducing cleaning time to about 10 minutes - This ensures the rollers are completely clean ready for the next use. MICROMETRIC DOSING: of the glue to be applied obtained by means of ground distribution tanks. Osama 2 Roller Glue Spreaders give a uniform and constant film of glue throughout the working width, thanks to the special dampers compensating for differences on noncalibrated panels. SAFETY: for all moving parts guarantee the operator's utmost safety. ELECTRICAL SYSTEM: Fully sealed, in compliance with CE regulations, with control button pad, voltage 24 volts.. Max working width 1600 mm Max working height 100 mm Roller diameter 185 mm Feed speed 18 m/min Motor power 0.5 hp Working height 800 mm Weight 320 kg Complete with integral manual washer (automatic optional)Lead Time: 61 Days€11,188.21€13,425.85 -
A glue spreader can speed up production, improve quality and reduce adhesive consumption for a relatively small investment. The Osama range of spreaders are built in Italy to an exceptionally high standard these 2 roller glue spreaders offer many benefits over hand glue spreading. As well as an increased in output over hand spreading, the volume of glue applied can be accurately regulated offering big savings in glue consumption. Accurate spreading also means less glue is squeeze out at the edge of panels resulting in easier trimming operation, saving time. All machines can apply double or single faced adhesive. Included in the specification is a manual wash system which when connected to a hose pipe directs water directly onto the rollers via nylon brushes. reducing cleaning time to about 10 minutes - This ensures the rollers are completely clean ready for the next use. MICROMETRIC DOSING: of the glue to be applied obtained by means of ground distribution tanks. Osama 2 Roller Glue Spreaders give a uniform and constant film of glue throughout the working width, thanks to the special dampers compensating for differences on noncalibrated panels. SAFETY: for all moving parts guarantee the operator's utmost safety. ELECTRICAL SYSTEM: Fully sealed, in compliance with CE regulations, with control button pad, voltage 24 volts.. 2 Roller Glue Spreader Max working width 400 mm Max working height 100 mm Roller diameter 185 mm Feed speed 18 m/min Motor power 0.5 hp Working height 800 mm Weight 220 kg Complete with integral manual washer (automatic optional)Lead Time: 61 Days€8,070.38€9,684.46 -
A glue spreader can speed up production, improve quality and reduce adhesive consumption for a relatively small investment. The Osama range of spreaders are built in Italy to an exceptionally high standard these 2 roller glue spreaders offer many benefits over hand glue spreading. As well as an increased in output over hand spreading, the volume of glue applied can be accurately regulated offering big savings in glue consumption. Accurate spreading also means less glue is squeeze out at the edge of panels resulting in easier trimming operation, saving time. All machines can apply double or single faced adhesive. Included in the specification is a manual wash system which when connected to a hose pipe directs water directly onto the rollers via nylon brushes. reducing cleaning time to about 10 minutes - This ensures the rollers are completely clean ready for the next use. MICROMETRIC DOSING: of the glue to be applied obtained by means of ground distribution tanks. Osama 2 Roller Glue Spreaders give a uniform and constant film of glue throughout the working width, thanks to the special dampers compensating for differences on noncalibrated panels. SAFETY: for all moving parts guarantee the operator's utmost safety. ELECTRICAL SYSTEM: Fully sealed, in compliance with CE regulations, with control button pad, voltage 24 volts.. 2 Roller Glue Spreader Max working width 600 mm Max working height 100 mm Roller diameter 185 mm Feed speed 18 m/min Motor power 0.5 hp Working height 800 mm Weight 240 kg Complete with integral manual washer (automatic optional)Lead Time: 61 DaysList €8,633.99€6,895.20Inc Vat €8,274.24 -
System for water cleaning coming from gluing roller machines. Easy handling - Reduced use of chemical products - Re-use of water for further cleanings CAPACITY: 300 liters With Aquarius is possible to send cleaning water to a tank with 300 liters capacity equipped with a stirrer. Automatically, cleaning water is separated from the glue by means of the addition of a flocculant element loaded into the tank by the operator in the quantity defined during the installation. Separated water can be used for a further cleaning of the gluing machine at the end of the working shift. Residual glue mud is discharged in a filter bag and can be disposed after 4-5 separation cycles, reducing the cost for the solid part only, drained of all existing water. To use the separated water, it is necessary another tank connected with a pump.Lead Time: 61 Days€16,008.85€19,210.62 -
- Length 4500 mm [4000/5000 opt]
- Width 1400 mm [1600 option]
Lead Time: 61 Days€61,637.08€73,964.50 -
HOTMASTER is our best-designed roller spreader, for use in the woodworking and construction fields, suitable for applying hot melt PUR glues on panels in chipboard, MDF and OSB, EPS, etc. where adhesion is difficult for traditional glues and it is possible to use double the quantity per square metre and unthinkable drying times. Avaialble from 1400-2200mm widths Hot melt glues, besides ensuring immediate setting on panels clad in glass, plastic, rubber, sheet metal etc. also achieve amazing processing times, practically in line and first time through, using laminating calenders with traditional rollers. HOTMASTER uses a diathermic oil heating system mounted inside the chrome-plated dispenser rollers and powered by electrical resistances. Internal probes automatically control and correct temperature changes of even one degree, with PLC touch screen monitoring. It is possible to reduce the "glue's field of action" in the upper part of the dispenser/spreader roller and in the chrome-plated/chrome-plated configuration, by means of Teflon side gaskets, installed inside the standard gaskets.Lead Time: 61 Days€ Enquire -
Complete glue spreader and application roller line for manufacturing panels using PUR adhesives.Lead Time: 61 Days€ Enquire -
- 4 Roller Glue Spreader
- Max working width 1300mm
- Max working height 100mm
Lead Time: 61 Days€ Enquire -
- 4 Roller Glue Spreader
- Max working width 1400 mm
- Max working height 100 mm
Lead Time: 61 Days€ Enquire -
- Glue Spreader 4 Roller
- Max working width 1600 mm
- Max working height 100 mm
Lead Time: 61 Days€ Enquire -
- 4 Roller Glue Spreader
- Max working width 2000 mm
- Max working height 0-100 mm
Lead Time: 61 Days€ Enquire -
- 4 Roller Glue Spreader
- Max working width 2200 mm
- Max working height 100 mm
Lead Time: 61 Days€ Enquire -
- Max working width mm 250 mm
- Max working height mm 100 mm
- Roller diameter mm 150 mm
Lead Time: 61 Days€5,935.87€7,123.04 -
- Working width 1300 - 2200mm
- Maximum thickness 0 - 100mm
- Brushes diameter 190mm
Lead Time: 61 Days€ Enquire -
Model 9033 Semi Auto Applicator. Semi automatic glue applicator for profiles and joints with two heads. Instead of using paintbrushes or pots, this machines is ideal for joinery production of windows and sashes, saving operator time and increasing production rate on clean up. The two nozzles are extra as these are made exactly to your wood sample. The Pizzi machines are built with steel, painted with non-toxic epoxy powders and supplied with one glue feeder. These are also arranged with working with a large number of nozzles, that can be manufactured on request, to solve any kind of problem in glue spreading. When machine is not in use i.e. t-breaks, lunch times etc, it is possible to immerse the nozzles in the water tubs that are provided by means of a hinge to the heads downwards, so to avoid any risk of drying the nozzles out. For the automatic machines only, a triple adjusting system prevents glue waist and guarantees an excellent spreading: - Spreading speed, measuring of the glue delivery and adjustment of length 100mm max. Working times, compared with the normal gluing systems, are reduced. Precise glue spreading on all surfaces guarantees a tighter bond.Lead Time: 30 Days€7,257.35€8,708.82 -
The Pizzi machines are built with steel, painted with non-toxic epoxy powders and supplied with one glue feeder. These are also arranged with working with a large number of nozzles, that can be manufactured on request, to solve any kind of problem in glue spreading. When machine is not in use i.e. t-breaks, lunch times etc, it is possible to immerse the nozzles in the water tubs that are provided by means of a hinge to the heads downwards, so to avoid any risk of drying the nozzles out. For the automatic machines only, a triple adjusting system prevents glue waist and guarantees an excellent spreading: - Spreading speed, measuring of the glue delivery and adjustment of length 100mm max. Working times, compared with the normal gluing systems, are reduced. Precise glue spreading on all surfaces guarantees a tighter bond.Lead Time: 30 Days€6,998.33€8,398.00 -
9049 Drawer Front Applicator Gluing machine for applying measured quantities of adhesive to drawer fronts. Simple to use and helps to improve finished product. Maximum centre distance 900 mmLead Time: 30 Days€6,585.81€7,902.97 -
9060/70 Automatic Applicator The Pizzi 9060 & 9070 series gluing machines are the most technically advanced fully automatic systems for applying PVA glue to frame and panel doors, or other wooden parts where accurate and repeatable amounts of glue need to be applied on a production level. Pizzi offers two series, the 9060 series that applies a bead of glue, and the 9070 series that sprays PVA glue. In addition, models 9061 & 9071 apply a spot of glue in the groove of a door rail. Models 9062 & 9072 have the capacity to apply an adjustable length bead of glue in a rail groove. FEATURES ò Injector Nozzles _ apply glue via injector nozzles to any detail, eliminating the need for matching profile heads. Quantity of glue dispensed is adjustable at nozzle. Comes standard with two nozzles each side, with capacity of three. ò Automatic Feed _ parts are loaded in hopper and fed automatically past injector nozzles. Sensor on outfeed table stops continuous feeding until glued parts are removed. Feed rate is adjustable. ò Glue Application _ fiber optic eyes determine the begin?ning and end of glued area. Sensors are adjustable to increase or decrease length of glued area. ò Spot or Bead of Glue Models 9061 & 9071 have additional injector on back of machine to apply a spot of glue to the center of the groove in stile & rail doors. 9062 & 9072 can apply an adjustable length bead in a groove. ò Glue Tank _2 1/2 gallon glue tank comes standard with all models. Once glue is placed in tank and pressurized, unit will dispense all glue without being re-pressurized until more glue is needed. SPECIFICATIONS ò Power supply 220V ò max. part thickness 30 mm single phase ò min. part thickness 12 mm ò Air required 110 psi ò max. parts loaded in ò max. part length 700 mm hopper at 30mm is 18 ò min. part length 150 mm ò max. parts loaded in ò max. part width 120 mm hopper at 12mm is 38Lead Time: 30 Days€26,334.86€31,601.83
