Last dispatch for Christmas 18/12/24 Click here to shop! >>

Bag Dust Extractor Systems

(17 Products)
Bag Dust Extractor Systems

Choose one of our industrial woodworking dust extractor bag systems for your workshop. Our range of speciality extractors offer an economical solution for clean air and a clean workshop when dealing with hardwood or softwood shavings. Speak to our sales team today for advice.

How Much Dust Extraction Do I Need?
Traditional machines usually give the airflow at 25 m/s Machines that produce large volumes of shavings such as a 4 side planer or thicknesser are normally needing an air speed of 28 m/s CNC Routers, Panel saws, and Edgebanders normally are calculated at 30 m/s or more Eg: When a spindle moulder with 2 x 120 mm outlets, a suction volume of approx. 2024 m3 / hr is required to get optimum extraction. It is therefore recommended that the extraction complies with this.


Dia No Outlets M3/h@25 m/s M3/h@28 m/s m3/h@30 m/s
80 1 452 506 543
100 1 707 791 848
120 1 1017 1139 1221
140 1 1385 1551 1662
150 1 1590 1780 1908
160 1 1809 2026 2170
180 1 2289 2564 2747
200 1 2826 3165 3391
225 1 3577 4006 4292
250 1 4416 4946 5299
300 1 6359 7122 7630

Dust extraction can be very confusing, and different manufacturers give different volumes required at different speeds. This is a guide for diameters and the corresponding capacity required for your dust extractor which should help you compare 'apples with apples' and make the right decision.

If for example the CNC machine you are buying is equipped with a 250mm diameter dust extraction connection, you can use the tables below to find out which extractor is suitable for your application [5299 cmh] but if possible you should always ask the manufacturer for the actual machine requirement first.

The list is split into 3 applications, depending on the type of machine and airspeed:</p>

View as Grid List

17 Items

per page
Filter By
Set Descending Direction
View as Grid List

17 Items

per page
Filter By
Set Descending Direction