Wood Drying Kilns
(18 Products)Looking for excellence in wood drying?
Take the lead and opt for a high-performance technology. Build on high performance technology. Using electrical technologies for drying softwood and hardwood, the heat pump has major advantages. Recognized for its high performance in the treatment of hardwood, dehumidification drying technology with PAC heat pump is increasingly sought for softwood. Used alone or in combination with another method, the heat pump provides a high quality finished product while being very economical.
Consider the total cost of ownership of your kiln
Choosing an electric wood drying technology must be based not only on energy costs and the drying rate, but also on the desired quality and total cost of ownership. This cost includes ones associated with the technology, including management, fire insurance premium etc. it is important to consider all these elements and throughout the business plan. We offer a wide range of kilns for drying wood: either kits to build your own or complete modular kilns giving us the ability to offer large kilns to your specific requirements. Large kilns include state of the art computer control systems providing efficiency & proven performance. We can offer turnkey projects inclusive of heating systems if required.
-
- F100
- Height (mm) 820
- Width (mm) 1070
Lead Time: 14 DaysList €15,449.09€12,819.07Inc Vat €15,382.88 -
This 'double-up' system is perfect for converting a 40ft container into a kiln. The F200 [x2 F100] with the B2000 Controller Automatic. *Please note this system is not suitbale for logs* The drying speed is controlled at a rate which will not cause degrade, therefore humidification equipment is unnecessary. The F200 is a packaged drying system for the wood retailer or other craftsman who require quality kiln dried wood. The unit is complete and ready for installation into a home built drying chamber. The FD100 has been designed to operate effectively at low humidity levels therefore you can be certain that your wood is thoroughly dried to the moisture content you need, as low as 6%. B2000 Controller: Fully Automatic control system, The customer would program the control system with, the species of timber, size of timber, final moisture content. The system then regulates the drying accordingly to prevent damage to the timber, while drying as quickly as possible. Kiln Sensors - Temperature probe, Qty 4 X Moisture probes placed within the stack of timber Typical Drying Capacities 1" Hardwood (m3) 7 2" Hardwood (m3) 12 3" Hardwood (m3) 21 1" Softwood (m3) 3.4 2" Softwood (m3) 7.6 3" Softwood (m3) 12.7 Save Money: dried supplies. Considerable savings in lumber buying costs can be made by installing you own drying system. Even after an allowance has been made for modest running costs, users usually recover their investment within a few months of installation. Improve Quality Being sure your wood is thoroughly dried means that you are confident in the stability of your finished product. No more bowed table tops, warped doors or cracked joints translate into happier customers and increased profits. Performance The F100 is a high performance drying unit designed to extract maximum water at the lowest cost. It operates at temperatures up to 55 degrees C. The best compromise between drying speed and reliability insures the dried wood is of the highest quality. EIPL recommends a drying rate of 1% per day or less when drying 1" hardwood. Faster drying is attainable with operating experience. The F100 is a practical machine for practical people. Loads of mixed species and board thicknesses can be dried together. Inventories can be reduced and the output of dried wood matched exactly to your needs. Independence Owning a drying system gives you flexibility to dry what you want, when you want it. Your options when buying wood are increased and you dependence on others for quality dry wood is reduced. You gain independence because the entry level moisture content of your lumber is no longer an issue. Running Costs The F200 is inexpensive to operate when installed in a well insulated drying chamber. The F200 may consume just 2.4kW of energy each hour of continuous running. The big dollars you have been spending for others to dry your wood are reduced to just pennies a day. Flexible The F200 can dry combined loads of mixed species and mixed thickness boards without degrade. This means that inventories can be minimized, saving space and reducing your capital outlay. Control The F200 drying unit is controlled by the STC1 Controller. To operate the system two controls are set at the beginning of the drying run, in accordance with our drying instructions. Kiln operation is then virtually automatic. The STC1 Controller is housed in a moisture resistant casing fitted with a transparent hinged front cover. An electronic thermometer measures the chamber temperature and displays this information on the control box where it can be monitored by the operator. Airflow Air movement is critical in the dehumidification process. The two supplemental fans insure an even flow of the dry warm air throughout the stack. Drying Chamber The unit is installed in a home built drying chamber typically constructed from exterior grade plywood and an insulation material. EIPL will recommend the best construction method and the most suitable chamber dimensions for you needs. To minimize chamber construction costs the drying unit has been designed to occupy a minimum amount of space. The unit's slim design is wall mounted at a ceiling height. This enables the operator to inspect the whole length of the lumber stack without an allowance being necessary for access past the dryer. For ease of installation brackets are supplied with the dryer which is first attached to the chamber wall. The unit is then lifted into position and secured using the hardware supplied. Consisting of: 2 X 13223BC-GB - F100 230V 50HZ 1PH (BC COMPATIBLE) 1 X 1306021 - F100 (X2) - B2000 CONTROL BOXLead Time: 14 DaysList €24,393.90€20,205.93Inc Vat €24,247.12 -
- - External dims: 5.3 x 5 x 2.6m
- - Wood load dims: 4.5 x 2.4 x 2.2m
- - No. stacks: 4 x (4.5m L)
Lead Time: 120 Days€ Enquire -
- - External dims: 6.8 x 5 x 2.6m
- - Wood load dims: 6 x 2.4 x 2.2m
- - No. stacks: 4 x (6m L)
Lead Time: 120 Days€ Enquire -
- Standard stack size 4 x 1 x 2m high
- No of stacks 8
- Insulation PU + aluminium 40mm
Lead Time: 26 Days€ Enquire -
- Standard stack size 4 x 1 x 2m high
- No of stacks 8
- Insulation PU + aluminium 40mm
Lead Time: 26 Days€ Enquire -
-
- Dehumidifier type PM450
- 3 x Ventilator PV-630-1.1kW
- Electrical control panel SK1
Lead Time: 26 Days€ Enquire -
-
- Dehumidifier type PM600
- 3 x Ventilator PV-630-1.1kW
- Electrical control panel SK1
Lead Time: 26 Days€ Enquire -
-
10m? HARD WOOD (except Beech) - code S&S-10HW Timber drier Parmatam type PM150 1 PM150 heating: 3 kW compressor: 1 kW fan: 0,18 kW electrical supply: 3*380-400V/50Hz / 10A capacity: max 110l / 24h. Tropicalised fans type 4D40Q-FC 4 Switch cupboard SK1+1 extra fan 1 Automatic controller HMI-05 1 Humidification BV-4 1 Motorised dampers 400x400 /set of 2 1 The HMI-05 control system is equipped with a microprocessor, able to automatically manage the different stages of the drying cycle: preheating core heating drying conditioning cooling these are all automatically managed by the system, according to the wood moisture content and to the selected program. At each phase the temperature and the equilibrium moisture content are controlled, according to the parameters scheduled by the program. Option Prefabficated Insulated Aluminium kiln -Ideal for drying split logs, for firewood preperation to suit log burners. Helping to cut the air polloution from burning wet wood.Lead Time: 26 Days€ Enquire -
10m? Soft wood (and Beech) - code S&S-10SW Timber drier Parmatam type PM300 1 heating: 6 kW compressor: 2 kW fan: 0,75 kW Temperature range 25-60c electrical supply: 3*380-400V/50Hz / 16A capacity: max 230l / 24h. Tropicalised fans type 4D40Q-FC 4 Switch cupboard SK1+1 extra fan 1 Automatic controller HMI-05 1 Humidification BV-4 1 Motorised dampers 400x400 /set of 2 1 The HMI-05 control system is equipped with a microprocessor, able to automatically manage the different stages of the drying cycle: preheating core heating drying conditioning cooling these are all automatically managed by the system, according to the wood moisture content and to the selected program. At each phase the temperature and the equilibrium moisture content are controlled, according to the parameters scheduled by the program. Option Prefabficated Insulated Aluminium kiln -Ideal for drying split logs, for firewood preperation to suit log burners. Helping to cut the air polloution from burning wet wood.Lead Time: 26 DaysList €28,033.12€19,180.64Inc Vat €23,016.77 -
12m? HARD WOOD (except Beech) - code S&S-15HW Timber drier Parmatam type PM300 heating: 6 kW compressor: 2 kW fan: 0,75 kW electrical supply: 3*380-400V/50Hz / 16A capacity: max 230l / 24h. Tropicalised fans type PV/500/0,55/8/PAG Switch cupboard SK1+1 extra fan Automatic controller HMI-05 Humidification BV-4 Motorised dampers 400x400 /set of 2 The HMI-05 control system is equipped with a microprocessor, able to automatically manage the different stages of the drying cycle: preheating core heating drying conditioning cooling these are all automatically managed by the system, according to the wood moisture content and to the selected program. At each phase the temperature and the equilibrium moisture content are controlled, according to the parameters scheduled by the program. Option Prefabficated Insulated Aluminium kiln -Ideal for drying split logs, for firewood preperation to suit log burners. Helping to cut the air polloution from burning wet wood.Lead Time: 26 Days€ Enquire -
20m? HARD WOOD (except Beech) - code S&S-20HW Timber drier Parmatam type PM450 1 heating: 6 kW compressor: 3 kW fan: 0,75 kW electrical supply: 3*380-400V/50Hz / 20A capacity: max 310l / 24h. Tropicalised fans type PV/500/0,55/8/PAG 5 Switch cupboard SK2 1 Automatic controller HMI-05 1 Humidification BV-4 1 Motorised dampers 400x400 /set of 2 1 The HMI-05 control system is equipped with a microprocessor, able to automatically manage the different stages of the drying cycle: preheating core heating drying conditioning cooling these are all automatically managed by the system, according to the wood moisture content and to the selected program. At each phase the temperature and the equilibrium moisture content are controlled, according to the parameters scheduled by the program. Option Prefabficated Insulated Aluminium kiln -Ideal for drying split logs, for firewood preperation to suit log burners. Helping to cut the air polloution from burning wet wood.Lead Time: 26 Days€ Enquire -
20m? Soft wood (and Beech) - code S&S-20SW Timber drier Parmatam type PM600 1 heating: 9 kW compressor: 5 kW fan: 0,75 kW electrical supply: 3*380-400V/50Hz / 32A capacity: max 560l / 24h. Tropicalised fans type PV/500/0,55/8/PAG 5 Switch cupboard SK2 1 Automatic controller HMI-05 1 Humidification BV-4 1 Motorised dampers 400x400 /set of 2 1 The HMI-05 control system is equipped with a microprocessor, able to automatically manage the different stages of the drying cycle: preheating core heating drying conditioning cooling these are all automatically managed by the system, according to the wood moisture content and to the selected program. At each phase the temperature and the equilibrium moisture content are controlled, according to the parameters scheduled by the program. Option Prefabficated Insulated Aluminium kiln -Ideal for drying split logs, for firewood preperation to suit log burners. Helping to cut the air polloution from burning wet wood.Lead Time: 26 Days€ Enquire
