Pneumatic universal presses range for drawers, doors and frames assembly.
This family of manual presses are equipped with cylinders with a quick adjustment. Its studied mechanism for fixing on the work surface, allows you a quickly change the position of the
same to suit the geometry of the part.
The use of a single fix bolt will allow you to adjust the cylinders in any direction. This system allowe you to press curved pieces also.
It is posible optionally in horizontal format.
Overall Dimensions:
--------------------
Length: 3300 / 3600 mm.
Height: 2000 / 2100 mm.
Width: 1100 / 1200 mm.
Max. Press Strength
--------------------
Vertical: 600 / 600 kg.
Lateral: 400 / 600 kg.
Working Sizes:
--------------
Max. (X): 2550 / 2800 mm.
Max. (Y): 1050 / 1500 mm.
Max. (Z): 120 mm
-Dimensions of working place 2550mm X 1050mm
-Iron lateral and inferior fences 120mm
-3 Vertical pneumatic cylinder of ¥63
-2 Lateral pneumatic cylinder of ¥63
-Maximum strength per cylinder 200 Kg
-The use of a single fix bolt will allow you to adjust the cylinders in any direction (0º-180º). This system allows you to press curved pieces also
-2 Hand lever control. One for lateral group and other for vertical group.
-2 Pressure regulators, 2 pressure indicators and 1 air service unit.
Frame clamping presses by Italpresse are indispensable for assembling door and window frames, including solid doors,
french windows, indoor and outdoor shutters and numerous other types of frames.
Italpresse's vast range of clamping presses meet the production requirements of all categories of customers, from small businesses to large manufacturers. The basic configuration of each clamping press can be adapted by a series of options and sizes.
High manufacturing accuracy is guaranteed by superior-quality mechanical components and numerous NC machining processes.
Features:
Vertical-horizontal adjustable thrust "FALCON/2000"
No. 2 horizontal cylinders for frame squaring
No. 2 vertical cylinders for horizontal cross-beam movement
No. 2 horizontal fences with quick lock
Horizontal and vertical movements by electrovalves
Lower beam adjustable in three (or five) positions:
Automatic locking-unlocking of the lower beam
Possibility of choice among three working cycles from the control panel
-automatic cycle;
-special cycle for the impulse control of the upper cross-beam;
Electronic pressing timer -manual cycle;
No. 2 safety electric eyes
CE SAFETY STANDARDS mm.
420/720/1020/1170/1320 (in. 18/28/40/46/52) for model mm. 3500x2500 (in. 139x98) mm.
420/720/1020 (in. 18/28/40) for model mm. 3500x2000 (in. 139x79) mm. 380/680/980 (in. 15/27/39) for model mm. 3000x1700 (in. 118x67) and mm. 3000x2000 (in. 118x79) Min Useful Dimension (mm) Mod. Internal Dimension (mm) Max Horizontal Thrust (mm) Max Vertical Thrust (mm) Horizontal Cylinders Diameter (mm) Vertical Cylinders Diameter (mm) Hydraulic Power Group (Kw) Vertical Cylinders Stroke (mm) Horizontal Cylinders Stroke (mm)
FALCON/S FALCON/2000 3000X1700 3000X1700 250X340h 250X340h 2400 3200 19000 19000 50/35 50/35 100/60 100/60 3 3 800 800 1.200 1.200
FALCON/S FALCON/2000 3000X2000 3000X2000 250X340h 250X340h 2400 3200 19000 19000 50/35 50/35 100/60 100/60 3 3 1.100 1.100 1.200 1.200
FALCON/S FALCON/2000 3500X2000 3500X2000 250X340h 250X340h 2400 3200 19000 19000 50/35 50/35 100/60 100/60 3 3 1.100 1.100 1.450 1.450
FALCON/S FALCON/2000 3500X2500 3500X2500 250X340h 250X340h 2400 3200 19000 19000 50/35 50/35 100/60 100/60 3 3 1.300 1.300 1.450 1.450
Options:
01 PENDANT PUSH-BUTTON STRIP
02 HORIZONTAL UPPER AND LOWER BEAMS
02 and fence plates covered with special high resistance plastic
02 material
03 BAR FOR SHUTTERS WITH PINS complete
with micrometric adjustment for the centering of the pieces (pitch upon request) useful length mm 2600/3100
not compatible with the optionals 10-11(frame pre-assembling devices)
04 BAR FOR SHUTTERS WITH PINS complete
04 with micrometric adjustment for the
04 centering of the pieces-electronic
04 cycle (pitch upon request) useful
04 length mm. 2600/3100
05 BAR IN TWO PARTS WITH VARIABLE
PITCH for shutters assembling
complete with supports fitting
included height will be increased
of mm. 60
06 SPECIAL DEVICE TO PRESS OBLIQUE AND
06 TRIANGULAR FRAMES, complete with:
06 no. 3 alu-jointed supports
06 no. 2 plastic spacers
07 CYLINDER AND RELATIVE HORIZONTAL
FENCE for frames with central cross
bar for frame press of mm. 3000
The height will be increased to mm.
490
08 CYLINDER AND RELATIVE HORIZONTAL
08 FENCE for frames with central cross
08 bar for frame press of mm. 3500
08 The height will be increased to mm.
08 490
09 EXTRA CHARGE FOR CYLINDER AND
RELATIVE HORIZONTAL FENCE if
supplied with optional 10 or 11
10 FRAME PRE-ASSEMBLING DEVICE
10 composed of 8 air cylinders mounted
10 on adjustable brackets (in this
10 case the minimum useful height will
10 be increased of mm. 100 with max.)
11 FRAME PRE-ASSEMBLING DEVICE
composed of 10 air cylinders.
8 cylinders mounted on adjustable
brackets + 2 fixed cylinders, one
on top and one on bottom beams.
(In this case the minimum useful
height will be increased of mm 100)
12 AUTOMATIC POSITIONING by reading of
12 the pieces in horizontal and vertical
13 ELECTRIC CONTACTS PRESSURE GAUGE
for adjustment of horizontal cylinders pressure
14 AUTOMATIC POSITIONING OF THE UPPER
14 CROSS-BEAM to lock the frame-pieces
14 then the upper cross-beam goes up
14 to the final height. Recommended
14 for mod. mm 3000x2000 and 3500x2500
14 only if they are equipped with
14 optionals 12 or 15 and 10 or 11
15 ELECTRONIC UNIT CONTROL with
microprocessor. The keyboard sets
automatically the frame height
while an electronic-eye reads its
length
LISTEMAC ROTARY CLAMP FOR LAMINATING WOOD EDGES
* rotation of the working table 360 degrees
* working table each one with mechanical stop
* activated by foot control no. 3
* each single table is provided with 3 independent working stations
* independent manual pneumatic valves no. 9
* thrust cylinders (6 each working table) no. 18
* upper press bar (3 each working table) with independent movement by pneumatic cylinders, acted simultaneously with correspondent vertical thrust cylinders no. 9
* filter lubricator unit
* vertical thrust cylinders provided with air regulation valves
* thrust of each vertical cylinder at 8 bars Kg 400
* hand-wheel gear for the manual turning of the machine
* frontal pressure bars opening speed setting valve (1 each cylinder)
- CE SAFETY STANDARDS
WORKING DIMENSIONS mm 2500x1200 or mm. 3000x1200
OPTIONS
- MOTORIZED ROTATION
- CROSS BEAM AND ADDITIONAL PNEUMATIC CYLINDER
- ADDITIONAL PNEUMATIC UPPER PRESS BAR
Frame clamping presses by Italpresse are indispensable for assembling door and window frames, including solid doors, french windows, indoor and outdoor shutters and numerous other types of frames.
Italpresse's vast range of clamping presses meet the production requirements of all categories of customers, from small businesses to large manufacturers. The basic configuration of each clamping press can be adapted by a series of options and sizes.
High manufacturing accuracy is guaranteed by superior-quality mechanical components and numerous NC machining processes.
Features:
Adjustable vertical/horizontal pressure
2 vertical hydraulic cylinders for top beam
2 horizontal hydraulic cylinders for squaring
2 quick-setting horizontal stops
Lever controlled hydraulic operate movements
Min Useful Dimensions w250 x h340 mm
Options
Pendant push-button control
Horizontal upper and lower beams and fence plates
covered with special high resistance plastic material
Bar for shutters with pins complete with micro
adjustment for the proper setting of the pitch
Special device to press oblique and triangular frames
SDE Hydraulic frame clamp with adjustable cylinders
Frame clamping presses by Italpresse are indispensable for assembling door and window frames, including solid doors,
french windows, indoor and outdoor shutters and numerous other types of frames.
Italpresse's vast range of clamping presses meet the production requirements of all categories of customers, from small businesses to large manufacturers. The basic configuration of each clamping press can be adapted by a series of options and sizes.
High manufacturing accuracy is guaranteed by superior-quality mechanical components and numerous NC machining processes.
Features;
Counterbalanced cylinder positioning
Three moving vertical beams with top cylinder
and one adjustable bottom stop
One vertical beam with 2 horizontal cylinders
Left fixed vertical beam with two stops
Hydraulic unit power Kw. 1,5
Lever controlled valves for cylinder activation
Min Useful Dimensions w250 x h340 mm
Model Capacity
IPSDE3017 3000 x 1700
IPSDE3020 3000 x 2000
IPSDE3525 3500 x 2500
Options:
Hydraulic Lock For The Horizontal Cylinder Beam
Overhead Hanging Control Panel
One Additional Sliding Vertical Beam
SDE Hydraulic frame clamp with adjustable cylinders - Frame clamping presses by Italpresse are indispensable for assembling door and window frames, including solid doors, french windows, indoor and outdoor shutters and numerous other types of frames.
Italpresse's vast range of clamping presses meet the production requirements of all categories of customers, from small businesses to large manufacturers. The basic configuration of each clamping press can be adapted by a series of options and sizes.
High manufacturing accuracy is guaranteed by superior-quality mechanical components and numerous NC machining processes.
Features;
Counterbalanced cylinder positioning
Three moving vertical beams with top cylinder
and one adjustable bottom stop
One vertical beam with 2 horizontal cylinders
Left fixed vertical beam with two stops
Hydraulic unit power Kw. 1,5
Lever controlled valves for cylinder activation
Min Useful Dimensions w250 x h340 mm
IPSDE3020 3000 x 2000
Options:
Hydraulic Lock For The Horizontal Cylinder Beam
Overhead Hanging Control Panel
One Additional Sliding Vertical Beam