Drop in for a coffee and look round our showroom just south of London. If you need to contact us: send us an email >>

Assembly

(48 Products)
Guarantee faster and more consistent results improve productivity be it in the joinery or industrial environment. We have a wide variety of assembly clamps and systems to speed up your production. which create perfectly aligned and tight joints. Woodwelders which use Radio Frequency to quickly heat glue through friction or Clamping machines which are faster door and window production.
View as Grid List

48 Items

per page
Filter By
Set Descending Direction
  1. Dynma BPN-Series Press for Drawer, Door
    Pneumatic universal presses range for drawers, doors and frames assembly. This family of manual presses are equipped with cylinders with a quick adjustment. Its studied mechanism for fixing on the work surface, allows you a quickly change the position of the same to suit the geometry of the part. The use of a single fix bolt will allow you to adjust the cylinders in any direction. This system allowe you to press curved pieces also. It is posible optionally in horizontal format. Overall Dimensions: -------------------- Length: 3300 / 3600 mm. Height: 2000 / 2100 mm. Width: 1100 / 1200 mm. Max. Press Strength -------------------- Vertical: 600 / 600 kg. Lateral: 400 / 600 kg. Working Sizes: -------------- Max. (X): 2550 / 2800 mm. Max. (Y): 1050 / 1500 mm. Max. (Z): 120 mm -Dimensions of working place 2550mm X 1050mm -Iron lateral and inferior fences 120mm -3 Vertical pneumatic cylinder of ¥63 -2 Lateral pneumatic cylinder of ¥63 -Maximum strength per cylinder 200 Kg -The use of a single fix bolt will allow you to adjust the cylinders in any direction (0º-180º). This system allows you to press curved pieces also -2 Hand lever control. One for lateral group and other for vertical group. -2 Pressure regulators, 2 pressure indicators and 1 air service unit.
    Lead Time: 90 Days
    €10,786.49
    €12,943.79
  2. Easy System for Application of PUR Glue
    A system for the application of one-component polyurethan adhesives (PUR), liquid, medium viscosity, moisture curing (moisture reactive). easyPUR represents a very smart and efficient solution for the application of PUR adhesives. A unique, time and adhesive saving, fast, accurate and clean system. Not as expensive as other larger and more complex machines for applying PUR adhesives and also, for sure, more productive and cost-effective compared to PUR glue cartridge, expensive and impractical solution if used in a production cycle! easyPUR, the right compromise that was missing! According to the instructions of the leading glue and adhesive manufacturers, PUR wood adhesives should be applied with ad hoc spatulas and apt nozzles for bead application, using PIZZI special profiled glue cylinders and suitable nozzles for PUR application. Slot nozzles available, always made-to-measure for PUR, with variable adjustable opening, with special lips with high resistance to abrasion. Easy product distribution system for control flow. Adjustment of application is carried out by means of precise registers. Special special tailor-made solutions are constantly developed and realized by PIZZI. Main features: - Available to suit different drum sizes - Pump pressure regulator; - Silica gel air dryer filter (first filling provided); - Hose - 3 m - Glue gun with universal pointed nozzle, on which all PIZZI nozzles are interchangeable - Side container for the glue gun (to be filled with the suitable solvent cleaner - cleaner is not provided) - Very quick and consistent application of adhesive - Simple to use and maintain
    Lead Time: 21 Days
    List €6,971.94
    €5,443.01
    Inc Vat €6,531.61
  3. Hoffman MU3 Manual Jointing machine
    W1031000 The new Hoffmann MU3 routing machine for dovetail joints (replaces the MU2) has many new standard features and a new ergonomic design, with a redesigned bridge, fine router adjustment and optional digital positioning of the centre fence and routing depth. it's an extremely versatile and effective way of jointing wood components. The dovetail system has been used for over 10 years worldwide and is now recognised as a high quality durable joint. The patented dovetail key provides the ideal joint because the precise double dovetail shape, and the exact matching slot produced on the machines means the two pieces of timber are accurately and precisely drawn together to form a secure and permanent joint. Applications include mitre joints on architraving, door linnings, picture frames, window beading, plinths etc. It can also be used in straight but joints for general furniture, drawer boxes, kitchen cabinet face frames etc. New features: Extended routing depth up to 95mm material thickness up to 140 / 170mm Digital display (option) for routing position and routing depth Table extension exactly to customers needs Fence elevation for high and narrow profiles Cornice-fences and many more accessories. Gross weight 32kg Voltage 230v Motor power 1kw Dimensions 740 x 650 x 835mm
    Lead Time: 8 Days
    €4,447.70
    €5,337.24
  4. Hoffman PP2 jointing machine
    The Hoffmann PP2 dovetail routing machine is a free standing production unit. This model is equipped with two high-speed router motors, to process two parts simultaneously. The supplied 45 degree fence plate, which is guided in a keyway in the machine table, is used to accurately position the material on the table. The locations of the dovetail slots for the Hoffmann Keys are adjusted by simply moving this fence plate. The machine is equipped with a pneumatic foot pedal. Upon pressing the foot pedal, the routing sequence is initiated: pneumatic clamps secures workpieces on machine table router heads advance until the pre-set height position is reached router heads return to base position pneumatic clamps releases workpieces Output is approx. 16 routing strokes per minute, which translates into 4 completely processed rectangular frames. These numbers include material handling, but obviously depend on routing depth, feed speed, material flow and operator performance as well. Flow control valves on the main pneumatic cylinder allow the operator to adjust the upward and downward feed rate independently, depending on the material being processed. A heavy-duty cast aluminum table provides a large work surface. The steel cabinet has a 4" diameter dust collection port on its backside for dust free operation. The supplied router bits are solid tungsten carbide, made to exacting specifications. Depending on the routing depth and the material to be routed, the useable cutter life is approx. 10,000 strokes. Every machine is shipped with a tool kit and set-up jig, which allows a router bit change in only minutes. Diamond cutters are also available. Technical Specifications Power Supply: 120 volts, 60 Hz, 1000 Watts Motor size: 2 x 1,000 watt, heavy-duty construction, built-in overload protection Motor speed: 33,000 rpm Collet size: 1/4" and 8mm collets included Air Supply: 90 psi Capacity: approx. 4 rectangular frames per minute Max. routing height: 4" Max. material height: 5 3/4" Key sizes: W-1, W-2, W-3, W-4 Shipping weight: 160kg Standard Features Hoffmann Dovetail Routing Machine, model PP2, ready for operation, with two W-2 carbide router bits, standard 45 degree fence plate and square stop, air regulator, air filter, and oil lubricator assembly installed. Also includes toolkit and manual.
    Lead Time: 8 Days
    € Enquire
  5. Hoffmann Mitre Saw & Dovetail Jointer
    Hoffmann Dovetail Jointer MS35SF (Combination Double-Mitre-Saw, and routing unit the latest generation of this particular mitre saw) The MS35SF helps to improve the quality of the joint, by cutting and routing each joint simultaneously. Thereby reducing handling time and increasing production. Description Pneumatically operated with 2no. saw-motor units and 2no additional router-motor units. Simultaneous production of two exact mitre cuts followed by routing of either one or two dovetail slots in each side of the cut mitres. Operating Options. to function only as a double-mitre-saw. to function as a double-mitre-saw and dovetail router. two dovetail positions position one (single dovetail) position two (single dovetail) All options are selected by the switch positions on the control panel. Changes of the dovetail slot, within the mitre cut are made manually. Digital clocks on each adjustment position determine exact positions. Thereby simplifying changes and reducing set-up time. Machine construction. Table aluminium-profile table. Machine stand Solid aluminium castings, RHS steel frame with sheet steel covers. Operation Pneumatic, by dual hand Siemans SPS control panel. Work-piece clamping..8 position vertical clamping cylinders, operated by foot-pedal or control panel. Optional additional horizontal clamps available if required. All cylinders have individual isolation. Fence stops........45 degrees fence-stop manually operated with digital reader and magnetic tape. Dust extraction.....2 x 100mm. dia channels at the rear of the machine. Hoffmann key sizes..W-1, W-2, W-3. Standard tooling W-2 T/C routers T/C tipped saw blades 350mm dia. Critical tool setting Router positions set by digital counter, router-cutting depths set by visual scale stop. Technical data. Motors 2x 500w angle routers /2 x1.8 KW 3ph saw motors. Motor speed Router motors 20,000rpm. Saw motors 2,800rpm. Tooling Routers W-1, W-2, W-3 / Saw blades 350mm dia. Tooling locating Router shank 6mm. saw blade flange 30mm. Table height 1070 mm Weight 485kg. Max work-piece height 100mm. Max work-piece width.80mm. Router stroke max depth 55mm. Router positions max 2 positions per work-piece Electrical connection 8KW 400v 50Hz Cycle time Processing time of Mitre saw without dovetails........4 sec A. With one dovetail.....10 sec B. With two dovetails......14 sec Incl. Loading time of the machine but excl.stacking Noise emission 85dB in working area. Description of operation. After positioning the square end of the profile into the machine and operating the dual-hand control, the material is clamped and then cut from above in an exact 45 degrees mitre. The tables open, to allow the router units to cut one or two router slots in the cut face of the profile. The profile is then passed through the machine to a fence-stop (digitally positioned), the machine is again activated, material clamped, double saw cuts made, router slots cut and material released. Each cycle of the machine produces a section with a mitre on each end with router slots made for Hoffmann Keys.
    Lead Time: 8 Days
    € Enquire
  6. Hoffmann MU 3-D Digital Manual Dovetail Jointer
    W1031100 Hoffmann MU 3-D Manual Dovetail routing machine Professional level, manually operated dovetail routing machine to rout a single dovetail keyway with each machining cycle. Heavy cast aluminum construction with large, ergonomically shaped table surface, precision linear bearings, galvanized steel motor carriage with integrated motor fine adjustment and digital displays for routing height and routing location. For Dovetail Key sizes W-0, W-1, W-2, W-3 (W-4 with optional larger motor) Standard Features: Hoffmann Dovetail Routing Machine, model MU 3-D, ready for operation, W-2 solid carbide router bit installed, standard 45 degree center fence plate, center line locator and square stop, motor fine adjustment, dual digital displays for keyway location and routing height, covered parts storage, toolkit and manual. Technical specification Power Supply 120 volts - 7.4 Amps Motor 885 Watt motor with double front bearing Motor speed 35,000 rpm at idle Collet size 1/4" Motor carriage guides 20mm diameter guide rods, precision ground Digital Display dual liquid crystal display, 3/8" digit size, accurate to 0.004" Operation manual- dual action design Max. height routing 3 3/8" - 85mm / moulding 5 1/8" - 130mm Dust collection port 2" - 50mm diameter Installed router bit W-2, solid carbide Available router bits W-0, W-1, W-2, W-3 (W-4 with optional larger motor) Dimensions W/D/H 29 1/8" x 25 5/8" x 32 3/4" (without optional table extensions) Pulling the main lever downward starts the machining cycle: > Padded hold-down plate secures work-piece and motor is switched on > Continued pulling advances the router head until pre-set height is reached > Releasing the lever returns the motor to its home position and shuts off motor > Padded hold-down plate releases work-piece Operation: The keyway location is adjusted by positioning the guided center fence plate on the machine table; the keyway length (routing height) is adjusted by setting a height-stop rod to the desired setting. Both positions are shown on separate digital displays for accuracy and repeatability. With the operator controlling the speed of all machine movements, output is greatly depended on material flow, handling and operator performance. On its backside, the large heavy-duty cast aluminum machine base has a 2" diameter dust collection port to connect a shop vacuum for dust free operation. The supplied router bit is solid tungsten carbide, made to exacting specifications. Depending on the routing depth and the material to be routed, the useable cutter life is approx. 10,000 strokes, often times even more. Every machine is shipped with a tool kit and set-up jig, which allows a router bit change in only minutes.
    Lead Time: 8 Days
    €3,825.34
    €4,590.41
  7. Italpresse Falcon Program Frame Clamp
    Frame clamping presses by Italpresse are indispensable for assembling door and window frames, including solid doors, french windows, indoor and outdoor shutters and numerous other types of frames. Italpresse's vast range of clamping presses meet the production requirements of all categories of customers, from small businesses to large manufacturers. The basic configuration of each clamping press can be adapted by a series of options and sizes. High manufacturing accuracy is guaranteed by superior-quality mechanical components and numerous NC machining processes. Features:  Vertical-horizontal adjustable thrust "FALCON/2000"  No. 2 horizontal cylinders for frame squaring  No. 2 vertical cylinders for horizontal cross-beam movement  No. 2 horizontal fences with quick lock  Horizontal and vertical movements by electrovalves  Lower beam adjustable in three (or five) positions:  Automatic locking-unlocking of the lower beam  Possibility of choice among three working cycles from the control panel -automatic cycle; -special cycle for the impulse control of the upper cross-beam;  Electronic pressing timer -manual cycle;  No. 2 safety electric eyes  CE SAFETY STANDARDS mm. 420/720/1020/1170/1320 (in. 18/28/40/46/52) for model mm. 3500x2500 (in. 139x98) mm. 420/720/1020 (in. 18/28/40) for model mm. 3500x2000 (in. 139x79) mm. 380/680/980 (in. 15/27/39) for model mm. 3000x1700 (in. 118x67) and mm. 3000x2000 (in. 118x79) Min Useful Dimension (mm) Mod. Internal Dimension (mm) Max Horizontal Thrust (mm) Max Vertical Thrust (mm) Horizontal Cylinders Diameter (mm) Vertical Cylinders Diameter (mm) Hydraulic Power Group (Kw) Vertical Cylinders Stroke (mm) Horizontal Cylinders Stroke (mm) FALCON/S FALCON/2000 3000X1700 3000X1700 250X340h 250X340h 2400 3200 19000 19000 50/35 50/35 100/60 100/60 3 3 800 800 1.200 1.200 FALCON/S FALCON/2000 3000X2000 3000X2000 250X340h 250X340h 2400 3200 19000 19000 50/35 50/35 100/60 100/60 3 3 1.100 1.100 1.200 1.200 FALCON/S FALCON/2000 3500X2000 3500X2000 250X340h 250X340h 2400 3200 19000 19000 50/35 50/35 100/60 100/60 3 3 1.100 1.100 1.450 1.450 FALCON/S FALCON/2000 3500X2500 3500X2500 250X340h 250X340h 2400 3200 19000 19000 50/35 50/35 100/60 100/60 3 3 1.300 1.300 1.450 1.450 Options: 01 PENDANT PUSH-BUTTON STRIP 02 HORIZONTAL UPPER AND LOWER BEAMS 02 and fence plates covered with special high resistance plastic 02 material 03 BAR FOR SHUTTERS WITH PINS complete with micrometric adjustment for the centering of the pieces (pitch upon request) useful length mm 2600/3100 not compatible with the optionals 10-11(frame pre-assembling devices) 04 BAR FOR SHUTTERS WITH PINS complete 04 with micrometric adjustment for the 04 centering of the pieces-electronic 04 cycle (pitch upon request) useful 04 length mm. 2600/3100 05 BAR IN TWO PARTS WITH VARIABLE PITCH for shutters assembling complete with supports fitting included height will be increased of mm. 60 06 SPECIAL DEVICE TO PRESS OBLIQUE AND 06 TRIANGULAR FRAMES, complete with: 06 no. 3 alu-jointed supports 06 no. 2 plastic spacers 07 CYLINDER AND RELATIVE HORIZONTAL FENCE for frames with central cross bar for frame press of mm. 3000 The height will be increased to mm. 490 08 CYLINDER AND RELATIVE HORIZONTAL 08 FENCE for frames with central cross 08 bar for frame press of mm. 3500 08 The height will be increased to mm. 08 490 09 EXTRA CHARGE FOR CYLINDER AND RELATIVE HORIZONTAL FENCE if supplied with optional 10 or 11 10 FRAME PRE-ASSEMBLING DEVICE 10 composed of 8 air cylinders mounted 10 on adjustable brackets (in this 10 case the minimum useful height will 10 be increased of mm. 100 with max.) 11 FRAME PRE-ASSEMBLING DEVICE composed of 10 air cylinders. 8 cylinders mounted on adjustable brackets + 2 fixed cylinders, one on top and one on bottom beams. (In this case the minimum useful height will be increased of mm 100) 12 AUTOMATIC POSITIONING by reading of 12 the pieces in horizontal and vertical 13 ELECTRIC CONTACTS PRESSURE GAUGE for adjustment of horizontal cylinders pressure 14 AUTOMATIC POSITIONING OF THE UPPER 14 CROSS-BEAM to lock the frame-pieces 14 then the upper cross-beam goes up 14 to the final height. Recommended 14 for mod. mm 3000x2000 and 3500x2500 14 only if they are equipped with 14 optionals 12 or 15 and 10 or 11 15 ELECTRONIC UNIT CONTROL with microprocessor. The keyboard sets automatically the frame height while an electronic-eye reads its length
    Lead Time: 109 Days
    € Enquire
  8. Italpresse Listemac Laminating Cramp
    LISTEMAC ROTARY CLAMP FOR LAMINATING WOOD EDGES * rotation of the working table 360 degrees * working table each one with mechanical stop * activated by foot control no. 3 * each single table is provided with 3 independent working stations * independent manual pneumatic valves no. 9 * thrust cylinders (6 each working table) no. 18 * upper press bar (3 each working table) with independent movement by pneumatic cylinders, acted simultaneously with correspondent vertical thrust cylinders no. 9 * filter lubricator unit * vertical thrust cylinders provided with air regulation valves * thrust of each vertical cylinder at 8 bars Kg 400 * hand-wheel gear for the manual turning of the machine * frontal pressure bars opening speed setting valve (1 each cylinder) - CE SAFETY STANDARDS WORKING DIMENSIONS mm 2500x1200 or mm. 3000x1200 OPTIONS - MOTORIZED ROTATION - CROSS BEAM AND ADDITIONAL PNEUMATIC CYLINDER - ADDITIONAL PNEUMATIC UPPER PRESS BAR
    Lead Time: 109 Days
    € Enquire
  9. Italpresse Nouvo Program Frame Clamp 3000x2000
    Frame clamping presses by Italpresse are indispensable for assembling door and window frames, including solid doors, french windows, indoor and outdoor shutters and numerous other types of frames. Italpresse's vast range of clamping presses meet the production requirements of all categories of customers, from small businesses to large manufacturers. The basic configuration of each clamping press can be adapted by a series of options and sizes. High manufacturing accuracy is guaranteed by superior-quality mechanical components and numerous NC machining processes. Features: Adjustable vertical/horizontal pressure 2 vertical hydraulic cylinders for top beam 2 horizontal hydraulic cylinders for squaring 2 quick-setting horizontal stops Lever controlled hydraulic operate movements Min Useful Dimensions w250 x h340 mm Options Pendant push-button control Horizontal upper and lower beams and fence plates covered with special high resistance plastic material Bar for shutters with pins complete with micro adjustment for the proper setting of the pitch Special device to press oblique and triangular frames
    Lead Time: 109 Days
    € Enquire
  10. Italpresse SDE Frame Cramp 3000x1700
    SDE Hydraulic frame clamp with adjustable cylinders Frame clamping presses by Italpresse are indispensable for assembling door and window frames, including solid doors, french windows, indoor and outdoor shutters and numerous other types of frames. Italpresse's vast range of clamping presses meet the production requirements of all categories of customers, from small businesses to large manufacturers. The basic configuration of each clamping press can be adapted by a series of options and sizes. High manufacturing accuracy is guaranteed by superior-quality mechanical components and numerous NC machining processes. Features; Counterbalanced cylinder positioning Three moving vertical beams with top cylinder and one adjustable bottom stop One vertical beam with 2 horizontal cylinders Left fixed vertical beam with two stops Hydraulic unit power Kw. 1,5 Lever controlled valves for cylinder activation Min Useful Dimensions w250 x h340 mm Model Capacity IPSDE3017 3000 x 1700 IPSDE3020 3000 x 2000 IPSDE3525 3500 x 2500 Options: Hydraulic Lock For The Horizontal Cylinder Beam Overhead Hanging Control Panel One Additional Sliding Vertical Beam
    Lead Time: 109 Days
    List €17,662.09
    €12,510.65
    Inc Vat €15,012.78
  11. Italpresse SDE Frame Cramp 3000x2000
    SDE Hydraulic frame clamp with adjustable cylinders - Frame clamping presses by Italpresse are indispensable for assembling door and window frames, including solid doors, french windows, indoor and outdoor shutters and numerous other types of frames. Italpresse's vast range of clamping presses meet the production requirements of all categories of customers, from small businesses to large manufacturers. The basic configuration of each clamping press can be adapted by a series of options and sizes. High manufacturing accuracy is guaranteed by superior-quality mechanical components and numerous NC machining processes. Features; Counterbalanced cylinder positioning Three moving vertical beams with top cylinder and one adjustable bottom stop One vertical beam with 2 horizontal cylinders Left fixed vertical beam with two stops Hydraulic unit power Kw. 1,5 Lever controlled valves for cylinder activation Min Useful Dimensions w250 x h340 mm IPSDE3020 3000 x 2000 Options: Hydraulic Lock For The Horizontal Cylinder Beam Overhead Hanging Control Panel One Additional Sliding Vertical Beam
    Lead Time: 109 Days
    List €16,213.19
    €12,960.16
    Inc Vat €15,552.19
  12. Pizzi 9068A Glue Spreader for Flat and Profile Edg
    Roller glue-spreading machine for glue application on flat and profile edges. Glue-spreading machine applying glue on flat and profile edges, by means of glue injector and nozzle, with automatic feeder. Automatic, fast, constant, accurate, clean glue application. For flat and profile edges and PVA glues only. One man operation. Just before the clamp, you easily place clean glued wood in the press. Lumber with different widths and different numbers are easily recognised by the machine control and reliably fed to the gluing station. A number of adjustments are available in order to optimize the operation and quality of glue application. It can be easily integrated in the production process and in support of other machines and presses, or as an independent stand-alone solution. Efficient and economical production is more important than ever today.
    Lead Time: 21 Days
    € Enquire
View as Grid List

48 Items

per page
Filter By
Set Descending Direction