Our Special Package Deal is now even cheaper and includes everything you need to get started, it includes: iTech Crafter Spindle Moulder, iTech DC001 Dust Extractor and the CMT Multi Profile Block suitable for profile knives up to 50mm.
The Crafter spindle moulder is designed to cope with a wide range of woodworking tasks: end moulding and profiling. It features a large cast iron table. The tilting spindle gives you greater flexibility when trying to create or match an existing moulding.
The 4 - spindle speeds and a heavy duty fence make this a pleasure to use. Solidly built (over 170kg) and advanced design mean this machine is perfect for woodworking professionals yet it is also easy to use and priced to make it an attractive machine for the serious amateur.
Powerful 3.75hp motor [1ph 230v only] (16amp plug)Large 640 x 710mm cast iron work table4 spindle speeds: 1800/3000/6000/9000rpmSpindle diameter/travel: 30mm/100mmSpindle tilt 10 to 30 º200mm table apperture Now complete with:Sanding bobbin.
** Please note the version of 01456 is WITHOUT sliding table **
iTECH DC001S 1 Bag Dust Extractor
iTECH DC001S 1 Bag Dust Extractor is a ruggedly extractor is designed for small workshops. The industrial construction and quality finish sets it apart from others. It is big enough to handle a 310mm planer or many other workshop machines. The cyclone sfiltration system works by separating the waste from the airflow, diverting the waste into the collecting bag. The base is fitted with castors for mobility around the workshop. The 125 mm inlet is fitted with a twin branch 100mm adaptor, allowing connection to either one or two machines. Supplied complete with 1x 3m hose 100mm diameter.
[Fan diameter] 300mm
[Inlet diameter] 125
[Inlet holes] 2 x 100mm
[Air capacity] 1490cfm
[Bag diameter] 500mm
[Packing size] 92x58x58cm
[Motor power] [2hp]
[Noise level] 87dB
voltage 240v
Machines are fitted with 13a plug but for EEC usage require connection to 16a supply
CMT part no:693.100.30
The CMT Euro Spindle Moulder Limitor Cutter Head is supplied in a plastic carry case with one set of straight knives and limitors. A choice of over 150 profiles are kept in stock for immediate despatch, 40mm and 50mm width of knives are available, as well as blanks for custom grinding.
CMT cutter heads guarantee a perfect execution for all of your projects.
To use on all types of moulder and spindle moulder machines.
Technical characteristics:
- Cutter head in light aluminium alloy with high tensile strength with limitors
- Pair of universal straight knives and limitors
- Tools for manual feed MAN - Pins for the automatic positioning of the knives and the limitors
- Possibility to use knives with a height of 40mm or 50mm (order no. 690) and limitors (order no. 691)
- Built according to the European Normative EN 847-1
CUTTER HEAD WITH LIMITORS D=100X40X30 (ALU)
Our Special Package Deal is now even cheaper and includes everything you need to get started, it includes: iTech Crafter Spindle Moulder, iTech DC001 Dust Extractor and the CMT Multi Profile Block suitable for profile knives up to 50mm. The Crafter spindle moulder is designed to cope with a wide range of woodworking tasks: end moulding and profiling. It features a large cast iron table. The tilting spindle gives you greater flexibility when trying to create or match an existing moulding. The 4 - spindle speeds and a heavy duty fence make this a pleasure to use. Solidly built (over 170kg) and advanced design mean this machine is perfect for woodworking professionals yet it is also easy to use and priced to make it an attractive machine for the serious amateur. Powerful 3.75hp motor [1ph 230v only] (16amp plug)Large 640 x 710mm cast iron work table4 spindle speeds: 1800/3000/6000/9000rpmSpindle diameter/travel: 30mm/100mmSpindle tilt 10 to 30 º200mm table apperture Now complete with:Sanding bobbin. ** Please note the version of 01456 is WITHOUT sliding table ** iTECH DC001S 1 Bag Dust Extractor iTECH DC001S 1 Bag Dust Extractor is a ruggedly extractor is designed for small workshops. The industrial construction and quality finish sets it apart from others. It is big enough to handle a 310mm planer or many other workshop machines. The cyclone sfiltration system works by separating the waste from the airflow, diverting the waste into the collecting bag. The base is fitted with castors for mobility around the workshop. The 125 mm inlet is fitted with a twin branch 100mm adaptor, allowing connection to either one or two machines. Supplied complete with 1x 3m hose 100mm diameter. [Fan diameter] 300mm [Inlet diameter] 125 [Inlet holes] 2 x 100mm [Air capacity] 1490cfm [Bag diameter] 500mm [Packing size] 92x58x58cm [Motor power] [2hp] [Noise level] 87dB voltage 240v Machines are fitted with 13a plug but for EEC usage require connection to 16a supply CMT part no:693.100.30 The CMT Euro Spindle Moulder Limitor Cutter Head is supplied in a plastic carry case with one set of straight knives and limitors. A choice of over 150 profiles are kept in stock for immediate despatch, 40mm and 50mm width of knives are available, as well as blanks for custom grinding. CMT cutter heads guarantee a perfect execution for all of your projects. To use on all types of moulder and spindle moulder machines. Technical characteristics: - Cutter head in light aluminium alloy with high tensile strength with limitors - Pair of universal straight knives and limitors - Tools for manual feed MAN - Pins for the automatic positioning of the knives and the limitors - Possibility to use knives with a height of 40mm or 50mm (order no. 690) and limitors (order no. 691) - Built according to the European Normative EN 847-1 CUTTER HEAD WITH LIMITORS D=100X40X30 (ALU)Lead Time: 53 DaysList €2,515.37€1,993.01Inc Vat €2,391.61
