Aigner Mounting rails are an ideal addition for spindle moulders, bandsaws, sawbenches and many other machines, to mount and fixing Aigner safety and working units.
Available in a range of lentghts, the rails can be used to fix Aigner extension tables, pressure rollers, and other modules, that afford extra safety and ease to machining processes. They are supplied complete with fixing bolts.
Rail length 250mm
Aigner quick grip handle for attachment to jigs and templates.
The QUICKLY allows a firm grip to be maintained on any such template and is fixed within seconds by a simple lever action. Unlike other handles it can be placed in the middle edge of a flat jig or template, and does not need to be positioned at the corner, and is easily attached or removed
Aigner CirQuick is a handy help when sawing or milling circles meaning no tracing or reworking is necessary when processing exact bows or
discs. The unit can be installed on any bandsaw or milling machine running either clockwise or counter-clockwise.
Features:
Support strips for level compensation;
Guide plate with swivel mounting;
Compatability with Aigner table extensions
Aigner Clamping shoes are designed to be attached to mounting rails, the integral fence or to the mounting plate, in order to fix working units.
Anodised aluminium construction
Clamping length 40mm.
Threaded holes 2 @ M6
Aigner Clamping shoes are designed to be attached to mounting rails, the integral fence or to the mounting plate, in order to fix working units.
Anodised aluminium construction
Clamping length 172mm.
Threaded holes 2 @ M6
Aigner Clamp I
A universal support for a wide range of safety equipment. The clamp positions safety equipment safely and quickly in both horizontal and vertical positions and can be fastened to mounting rails, mounting plates or to the integral fence.
Aigner Powerfeed protector is a handy spacer that allows you to preset the feed unit position and optimise the angle. This saves valuable set up time and saves your feed rollers from coming into contact with the cutter block or damaging the fences
The clamping lever allows fine positional adjustment
One unit consists of:
A= Maximum shift to either side 75mm
B= Clamping lever
C= Plastic end cap protection
D= Four socket head cap screws for fastening the spacer to the feed unit, interchangeable with the hex-socket set screws E
E= Eight hex-socket screws to compensate uneven mounting surfaces.
The Aigner Variofence
The safe cross stop for stop moulding on spindle moulders equipped with the Aigner table system. It provides accurate sizes and reduced risk of accidents
Features:
Swivelling through 90 degrees;
Infinitely adjustable and demountable;
Can be mounted on either side
Cutter frame E
Used as an edge support, mounts on the integral fence when machining the face of curved workpieces. Continuously adjustable retainer blocks.
The Aigner Contermax is an essential extra for spindle moulders when working with smaller pieces of timber or end grain.
The Contermax enables safe and efficient working: the quick release clamp secures and holds the workpiece for working against spindle fences and at 90 degrees to the spindle. End grain mouldings are thus safely achieved without the need to alter the spindle rise and fall position, or adjust the fences. A backing piece can be fitted to avoid break-out.
Maximum clamping width 200mm
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 150mm capacity Bowmould Master.
It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate.
To suit shaft diameter 40mm
Aigner Bowmould master shaping guard is a patented modular system that allows fast and safe machining on curved work. It can be used for either left hand or right hand machining and comes with infinitely adjustable infeed guide, dust shields suitable for tool diameters up to 150mm and suitable for either hand or power feed use. The unti features integrated dust and chip collection with dust spigot to rear.
Tools are easily visible through the transparent shield. The spring-loaded shield is used to adjust the necessary pressure on the workpiece.
Optional equipment:
Curved moulding stop, slips on the arbor to allow precise depth of moulding adjustment. Optional guide wheels can also be used for safe accurate guiding.
Features:
Fully adjustable guard brushes;
Brake shoe integrated in the starting strip which may be
swung through 90 degrees from its working position into its inoperative
position and vice versa. In both positions it is automatically locked, and ensures stopping of the starting ring.
Maximum tool diameter 150mm
Aigner Cutter frame for smaller (150mm capacity) BowmouldMaster
Used on the table of the machine as a support for workpieces when clamped onto the BowmouldMaster
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 220mm capacity Bowmould Master.
It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate.
To suit shaft diameter 30mm
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 220mm capacity Bowmould Master.
It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate.
To suit shaft diameter 1 1/4"
Aigner Bowmould master shaping guard is a patented modular system that allows fast and safe machining on curved work. It can be used for either left hand or right hand machining and comes with infinitely adjustable infeed guide, dust shields suitable for tool diameters up to 150mm and suitable for either hand or power feed use. The unti features integrated dust and chip collection with dust spigot to rear.
Tools are easily visible through the transparent shield. The spring-loaded shield is used to adjust the necessary pressure on the workpiece.
Optional equipment:
Curved moulding stop, slips on the arbor to allow precise depth of moulding adjustment. Optional guide wheels can also be used for safe accurate guiding.
Features:
Fully adjustable guard brushes;
Brake shoe integrated in the starting strip which may be
swung through 90 degrees from its working position into its inoperative
position and vice versa. In both positions it is automatically locked, and ensures stopping of the starting ring.
Maximum tool diameter 220mm
The Aigner Centrex safety guard and pressure unit for spindle moulders
This safety pressure unit sets a new high standard for machining on a vertical spindle moulder. The adjustment for horizontal and vertical position is totally tool-free ensuring minimal resetting time. The vertical pressure shoe is spring loaded to provide precise and easy feeding across the cutting area and the horizontal pressure shoe is made of high-strength transparent polycarbonate, allowing the operator to see the workpieces whilst machining.
Features:
Solid aluminium casting with annodised finish;
Vertical pressure guide, aluminium annodised;
Horizontal pressure guide, aluminium with annodised finish;
Wear resistant high strength transparent shoe providing horizontal pressure;
Spring loaded vertical pressure shoe;
Mounting pedestal threaded for M10 studs/cap screws.
Aigner Spacer block
This block is for use where the Centrex is to be mounted on the back of the fence structure, and is designed so the operator can cut it to length to suit his or her specific machine
The purpose of this block is to give adequate operating height. It is important to ensure that the section of the fence onto which the Centrex is to be mounted is sufficiently large and rigid to prevent flexing.
Length of block 250 mm
Supporting bridge For mounting the Aigner Centrex on the machine table when the size or strength of the fence housing prevents its attachment.
The Aigner supporting bridge allows the Centrex to be mounted
independently to the fence, the extraction point to be ducted in a
straight line without any extra work.
Supporting bridge fastened on the machine table. Four basic
setting positions are possible for varying width (max. inner width 335 mm). Height 215 mm.
Supporting bridge For mounting the Aigner Centrex on the machine table when the size or strength of the fence housing prevents its attachment.
The Aigner supporting bridge allows the Centrex to be mounted
independently to the fence, the extraction point to be ducted in a
straight line without any extra work.
Supporting bridge fastened on the machine table. Four basic
setting positions are possible for varying width (max. inner width 500 mm). Height 215 mm.
Aigner Mounting blocks
For fastening the Aigner Centrex and the supporting bridge to the rear edge of the machine table. These are used when the distance at the rear of the spindle shaft is not sufficient for the Centrex to be used close to the fence in its fully closed position.
An important basic unit to provide low friction side pressure on the workpiece passing through a spindle moulder or other machine
In combination with the Aigner single, double or quad wheels, pressure shoe, or slide shoe the spring-loaded pressure module provides a precise guidance for safe operation
Minimum reach when used with
pressure roller(s) from mounting edge 120mm
Maximum reach when used with
pressure roller(s) from mounting edge 510mm
Maximum height when used
with pressure roller(s) from table 160mm
An important basic unit to provide low friction side pressure on the workpiece passing through a spindle moulder or other machine
In combination with the Aigner single, double or quad wheels, pressure shoe, or slide shoe the spring-loaded pressure module provides a precise guidance for safe operation
Minimum reach when used with
pressure roller(s) from mounting edge 5mm
Maximum reach when used with
pressure roller(s) from mounting edge 630mm
Maximum height when used
with pressure roller(s) from table 160mm
Aigner Single Pressure Roller
This universally usable pressure element featuring polyamid wheels, allows for precise guidance, with simple and fast insertion into the Aigner Mounting Module
Wheel diameter 100mm
Wheel width 10mm
Aigner Double Pressure Roller
This universally usable pressure element featuring polyamid wheels, allows for precise guidance, with simple and fast insertion into the Aigner Mounting Module
Wheel diameter 60mm
Distance between wheel centres 64 - 65mm
Wheel width 10mm
Aigner Double Pressure Roller
This universally usable pressure element featuring polyamid wheels, allows for precise guidance, with simple and fast insertion into the Aigner Mounting Module
Wheel diameter 60mm
Distance between outer wheel centres 260mm
Wheel width 10mm
Aigner Wooden Pressure Shoe
Designed to be used in conjuction with Aigner pressure roller module, and particularly useful in machining upright panels on the spindle moulder
Aigner Segmenter
A necessary complementary tool to the CirQuick to enable the sawing of segments of a circle, for radii up to 1000mm
Can be used in conjunction with the Aigner Guide Set for increased functionality
Aigner Magnetic Push Stick
Allows you to leave the push stick in lots of handy places on the steel body or table of your machine and spend less time looking for it
For the safe feeding of work-piece on circular saws, panel saws, vertical spindle milling machines and narrow bandsaws. Made of natural wood non-scratching and may be easily chipped, which saves the cutters and protects your hands. Has fixing magnets for easy location at the machine.
Aigner Safety Traverse
An indispensable mounting point to protect against sudden falls, that fits into doorway openings up to 1100mm.
The Aigner safety traverse offers (in connjunction) with the Aigner Rope Set, ideal safety assistance when working in wall openings and on balcony support plates
Features:
No tools are needed to fix the traverse in doorways
Fast adjustment with clamping device.
Star grip to clamp the safety traverse.
Bearing surfaces coated
Aigner Mounting rails are an ideal addition for spindle moulders, bandsaws, sawbenches and many other machines, to mount and fixing Aigner safety and working units. Available in a range of lentghts, the rails can be used to fix Aigner extension tables, pressure rollers, and other modules, that afford extra safety and ease to machining processes. They are supplied complete with fixing bolts. Rail length 250mmIn StockList €43.16€32.38Inc Vat €38.86
Aigner quick grip handle for attachment to jigs and templates. The QUICKLY allows a firm grip to be maintained on any such template and is fixed within seconds by a simple lever action. Unlike other handles it can be placed in the middle edge of a flat jig or template, and does not need to be positioned at the corner, and is easily attached or removedIn StockList €57.56€41.97Inc Vat €50.36
Aigner CirQuick is a handy help when sawing or milling circles meaning no tracing or reworking is necessary when processing exact bows or discs. The unit can be installed on any bandsaw or milling machine running either clockwise or counter-clockwise. Features: Support strips for level compensation; Guide plate with swivel mounting; Compatability with Aigner table extensionsIn StockList €169.80€125.91Inc Vat €151.09
Aigner Powerfeed protector is a handy spacer that allows you to preset the feed unit position and optimise the angle. This saves valuable set up time and saves your feed rollers from coming into contact with the cutter block or damaging the fences The clamping lever allows fine positional adjustment One unit consists of: A= Maximum shift to either side 75mm B= Clamping lever C= Plastic end cap protection D= Four socket head cap screws for fastening the spacer to the feed unit, interchangeable with the hex-socket set screws E E= Eight hex-socket screws to compensate uneven mounting surfaces.In Stock€76.75€92.10
Aigner Mounting Plates II Allows for the convenient mounting of the Clamp I (AI212273000192)Lead Time: 39 Days€62.36€74.83
The Aigner Variofence The safe cross stop for stop moulding on spindle moulders equipped with the Aigner table system. It provides accurate sizes and reduced risk of accidents Features: Swivelling through 90 degrees; Infinitely adjustable and demountable; Can be mounted on either sideLead Time: 34 Days€201.46€241.75
Axial pin for Aigner Safety Integral Fence AKA AI213311954190Lead Time: 34 Days€22.78€27.34
The Aigner Contermax is an essential extra for spindle moulders when working with smaller pieces of timber or end grain. The Contermax enables safe and efficient working: the quick release clamp secures and holds the workpiece for working against spindle fences and at 90 degrees to the spindle. End grain mouldings are thus safely achieved without the need to alter the spindle rise and fall position, or adjust the fences. A backing piece can be fitted to avoid break-out. Maximum clamping width 200mmIn StockList €212.98€143.90Inc Vat €172.68
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 150mm capacity Bowmould Master. It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate. To suit shaft diameter 40mmIn Stock€296.19€355.43
Aigner Bowmould master shaping guard is a patented modular system that allows fast and safe machining on curved work. It can be used for either left hand or right hand machining and comes with infinitely adjustable infeed guide, dust shields suitable for tool diameters up to 150mm and suitable for either hand or power feed use. The unti features integrated dust and chip collection with dust spigot to rear. Tools are easily visible through the transparent shield. The spring-loaded shield is used to adjust the necessary pressure on the workpiece. Optional equipment: Curved moulding stop, slips on the arbor to allow precise depth of moulding adjustment. Optional guide wheels can also be used for safe accurate guiding. Features: Fully adjustable guard brushes; Brake shoe integrated in the starting strip which may be swung through 90 degrees from its working position into its inoperative position and vice versa. In both positions it is automatically locked, and ensures stopping of the starting ring. Maximum tool diameter 150mmLead Time: 39 Days€944.94€1,133.93
Aigner Cutter frame for smaller (150mm capacity) BowmouldMaster Used on the table of the machine as a support for workpieces when clamped onto the BowmouldMasterLead Time: 39 Days€97.13€116.56
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 220mm capacity Bowmould Master. It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate. To suit shaft diameter 30mmLead Time: 39 Days€298.59€358.31
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 220mm capacity Bowmould Master. It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate. To suit shaft diameter 1 1/4"In Stock€393.33€472.00
Aigner Bowmould master shaping guard is a patented modular system that allows fast and safe machining on curved work. It can be used for either left hand or right hand machining and comes with infinitely adjustable infeed guide, dust shields suitable for tool diameters up to 150mm and suitable for either hand or power feed use. The unti features integrated dust and chip collection with dust spigot to rear. Tools are easily visible through the transparent shield. The spring-loaded shield is used to adjust the necessary pressure on the workpiece. Optional equipment: Curved moulding stop, slips on the arbor to allow precise depth of moulding adjustment. Optional guide wheels can also be used for safe accurate guiding. Features: Fully adjustable guard brushes; Brake shoe integrated in the starting strip which may be swung through 90 degrees from its working position into its inoperative position and vice versa. In both positions it is automatically locked, and ensures stopping of the starting ring. Maximum tool diameter 220mmLead Time: 34 DaysList €1,243.30€956.93Inc Vat €1,148.32
The Aigner Centrex safety guard and pressure unit for spindle moulders This safety pressure unit sets a new high standard for machining on a vertical spindle moulder. The adjustment for horizontal and vertical position is totally tool-free ensuring minimal resetting time. The vertical pressure shoe is spring loaded to provide precise and easy feeding across the cutting area and the horizontal pressure shoe is made of high-strength transparent polycarbonate, allowing the operator to see the workpieces whilst machining. Features: Solid aluminium casting with annodised finish; Vertical pressure guide, aluminium annodised; Horizontal pressure guide, aluminium with annodised finish; Wear resistant high strength transparent shoe providing horizontal pressure; Spring loaded vertical pressure shoe; Mounting pedestal threaded for M10 studs/cap screws.In StockList €984.28€619.97Inc Vat €743.96
Aigner Spacer block This block is for use where the Centrex is to be mounted on the back of the fence structure, and is designed so the operator can cut it to length to suit his or her specific machine The purpose of this block is to give adequate operating height. It is important to ensure that the section of the fence onto which the Centrex is to be mounted is sufficiently large and rigid to prevent flexing. Length of block 250 mmLead Time: 39 Days€51.56€61.87
Supporting bridge For mounting the Aigner Centrex on the machine table when the size or strength of the fence housing prevents its attachment. The Aigner supporting bridge allows the Centrex to be mounted independently to the fence, the extraction point to be ducted in a straight line without any extra work. Supporting bridge fastened on the machine table. Four basic setting positions are possible for varying width (max. inner width 335 mm). Height 215 mm.Lead Time: 39 Days€167.88€201.46
Supporting bridge For mounting the Aigner Centrex on the machine table when the size or strength of the fence housing prevents its attachment. The Aigner supporting bridge allows the Centrex to be mounted independently to the fence, the extraction point to be ducted in a straight line without any extra work. Supporting bridge fastened on the machine table. Four basic setting positions are possible for varying width (max. inner width 500 mm). Height 215 mm.Lead Time: 39 Days€178.68€214.42
Aigner Mounting blocks For fastening the Aigner Centrex and the supporting bridge to the rear edge of the machine table. These are used when the distance at the rear of the spindle shaft is not sufficient for the Centrex to be used close to the fence in its fully closed position.Lead Time: 39 Days€51.56€61.87
An important basic unit to provide low friction side pressure on the workpiece passing through a spindle moulder or other machine In combination with the Aigner single, double or quad wheels, pressure shoe, or slide shoe the spring-loaded pressure module provides a precise guidance for safe operation Minimum reach when used with pressure roller(s) from mounting edge 120mm Maximum reach when used with pressure roller(s) from mounting edge 510mm Maximum height when used with pressure roller(s) from table 160mmIn Stock€329.77€395.72
An important basic unit to provide low friction side pressure on the workpiece passing through a spindle moulder or other machine In combination with the Aigner single, double or quad wheels, pressure shoe, or slide shoe the spring-loaded pressure module provides a precise guidance for safe operation Minimum reach when used with pressure roller(s) from mounting edge 5mm Maximum reach when used with pressure roller(s) from mounting edge 630mm Maximum height when used with pressure roller(s) from table 160mmIn Stock€363.35€436.02
Aigner Single Pressure Roller This universally usable pressure element featuring polyamid wheels, allows for precise guidance, with simple and fast insertion into the Aigner Mounting Module Wheel diameter 100mm Wheel width 10mmLead Time: 34 Days€55.16€66.19
Aigner Double Pressure Roller This universally usable pressure element featuring polyamid wheels, allows for precise guidance, with simple and fast insertion into the Aigner Mounting Module Wheel diameter 60mm Distance between outer wheel centres 260mm Wheel width 10mmLead Time: 34 Days€148.70€178.44
Aigner Wooden Pressure Shoe Designed to be used in conjuction with Aigner pressure roller module, and particularly useful in machining upright panels on the spindle moulderLead Time: 39 Days€45.57€54.68
Aigner Segmenter A necessary complementary tool to the CirQuick to enable the sawing of segments of a circle, for radii up to 1000mm Can be used in conjunction with the Aigner Guide Set for increased functionalityLead Time: 39 Days€249.43€299.32
Aigner Magnetic Push Stick Allows you to leave the push stick in lots of handy places on the steel body or table of your machine and spend less time looking for it For the safe feeding of work-piece on circular saws, panel saws, vertical spindle milling machines and narrow bandsaws. Made of natural wood non-scratching and may be easily chipped, which saves the cutters and protects your hands. Has fixing magnets for easy location at the machine.Lead Time: 34 DaysList €30.22€16.79Inc Vat €20.15
Aigner Safety Traverse An indispensable mounting point to protect against sudden falls, that fits into doorway openings up to 1100mm. The Aigner safety traverse offers (in connjunction) with the Aigner Rope Set, ideal safety assistance when working in wall openings and on balcony support plates Features: No tools are needed to fix the traverse in doorways Fast adjustment with clamping device. Star grip to clamp the safety traverse. Bearing surfaces coatedIn Stock€242.23€290.68
Aigner Rope Set Safety harness EN 361, fall absorber-rope tightener with belt band and safety rope (10 m), complete with storage bagLead Time: 39 Days€ Enquire
