Italpresse Estrema 14.5-28 Membrane Press
AUTOMATIC AIR MEMBRANE PRESSES FOR 3-D LAMINATION Model 14.5-28
Highest quality of the end product, extremely fast cycles, quick production changes, unparalleled user-friendliness. Such are the targets that we had in mind when we designed this range of air membrane presses for
thermoforming materials (PVC, PPE, ABS, TRANSFER FOILS; etc.) or natural veneers.
Estrema is available as a membrane or membrane-less version and can be supplied with one, two,three trays with manual or automatic movement. The trays can be equipped with the exclusive Italpresse PSS (PIN SUPPORT SYSTEM) that completely eliminates the need for panel raisers and accelerates the production changes.
Membrane and membrane-less cycles: possibility to choose among many membrane, membrane-less and high-gloss cycles.
Top heating platen with direct electric heating and oil circulation for a higher
degree of temperature uniformity.
Maximum platen temperature up to 150 degreesC.
High thickness monolithic steel bottom platen.
Touch-screen color operator interface with possibility to set and store working programs.
PSS (PIN SUPPORT SYSTEM) (optional)
AN EXCLUSIVE ITALPRESSE SOLUTION TO COMPLETELY ELIMINATE THE NEED OF PANEL RAISERS.
In recent years, the exclusive ITALPRESSE PSS (PIN SUPPORT SYSTEM) has had an incredible success with our customers, who give enthusiastic comments about how easy to use is this system without compromising the product quality. It's by far faster and more
efficient than any magnetic or 'add-on' device and it saves a lot of money if compared with a full blown scanner pin system. The working
tray is completely filled with square pins. With a simple push of the pins around the panel, they go down, leaving the panel correctly raised over the working table. When you need to change the dimensions of the panels, all the pins can be re-set to the up position while the tray exits the press. A special surface finish of the top face of the pins prevents any shifting of the panels during the whole cycle. Another advantage is that you don't need to put 'blocks' around the isolated panels because the pins have a 'self-blocking' effect saving the quality of panel edges and corners.
Platen Dimension 1450x2800mm (57"x110")
Inside frame dimension 1330x2680mm (52"x106")
Thrust 260 Ton
Hydraulic Group Power 4 Kw
Maximum Platen Temp 150c deg