Aigner Bowmould master shaping guard is a patented modular system that allows fast and safe machining on curved work. It can be used for either left hand or right hand machining and comes with infinitely adjustable infeed guide, dust shields suitable for tool diameters up to 150mm and suitable for either hand or power feed use. The unti features integrated dust and chip collection with dust spigot to rear.
Tools are easily visible through the transparent shield. The spring-loaded shield is used to adjust the necessary pressure on the workpiece.
Optional equipment:
Curved moulding stop, slips on the arbor to allow precise depth of moulding adjustment. Optional guide wheels can also be used for safe accurate guiding.
Features:
Fully adjustable guard brushes;
Brake shoe integrated in the starting strip which may be
swung through 90 degrees from its working position into its inoperative
position and vice versa. In both positions it is automatically locked, and ensures stopping of the starting ring.
Maximum tool diameter 220mm
The Aigner table extensions are part of the modular range of accessories. The basic table is 1100mm long and 170mm wide, and can be clipped on and off machines in seconds when not in use.
A range of optional rail lengths are available for mounting. With the use of a lionking clamp (AI212226000172), 2 units can be connected to give 2200mm support or multiple units can be mounted side by side for wider support.
These table extensions are ideal for bandsaws, shapers, spindle moulders, circular saws etc. The fold down leg locks into place and offers a wide range of height adjustment.
Useful additions such asthe optional back stroke protection make it an invaluable aid when producing 'stop mouldings'. Additionally, it supports other units such as CirQuick, Segmenter etc for cutting arcs and curves.
Features:
Solid table made of anodised aluminium
Weight 6kg
Shipping Dims 120 x 23 x 6cm
NOTE - Mounting rails should be purchased separately
Option to extend the length:AI212226000172 Aigner Coupling bracket to join 2 tables
Aigner Integral Fence System - 500mm infeed + 500mm outfeed
A beautifully engineered fence system with revolutionary features for safe and accurate setting on spindle moulders and shapers. On spindle moulders the opening in the tool area is always problematic. The Aigner integral fence provides a guiding area without any gap, by using an integrated set of fingers that can be swung across to provide continuous support. The fingers have micro adjustment in the vertical plane allowing them to give maximum support.
Additional safety, working, and support units can be mounted on to the integral fence. These include the flush fix, support rail, pressure module, filling bar and spreader. The anodised finish on the fence surfaces reduces friction and gives a wear resistant finish.
Features:
- Four versions available, making the fences suitable for most spindle moulders
- Mounting and adjusting can be done quickly and simply without additional tools
- Exact setting to tool diameter and tool height is possible thanks to continuous adjustability
Central fence mounting bolt can sit 45 - 80mm height from machine bed
FME Handheld Moisture Meter - for the professional in the wood industry
Fast and accurate measurement of 79 wood species and 8 construction materials.
The tool for the true professional in the woodworking and construction industry. The FME has the same sensor technology as the FMD-Plus assuring an accuracy of 0,2 %.
The FME calculates measurement data for
79 individual wood species
4 common wood groups
8 popular building materials like concrete, MDF or gypsum.
The internal memory can hold up to 50 measurements, through which you can scroll using the instrument's panel keys. Connect our optional temperature sensor for automatic temperature correction.
The standard kit includes
the FME Meter
A Hammer Probe
Assorted insulated and non-insulated pins
a manual and cabling
Optionally you can order
a Handgrip probe
a Reference resistor
an external temperature sensor to connect to the meter
CMT part no:183.362.00
CMT 183 Cutter Arbor to take cutter blocks with 40mm Bore - ideal for using spindle moulder tooling on your CNC router or use on modern spindle moulders with HSK63 fitting such as Martin, Hoffman, SCM, Panhans etc
HSK-F63 shank for Biesse, Homag, Holz-Her, Felder, IMA, Weeke, SCM, Morbidelli, Masterwood and more!
HSK-F63 shank
D=40
Arbor length 100mm
CMT part no:183.360.00
CMT 183 Cutter Arbor to take cutter blocks with 30mm Bore - ideal for using spindle moulder tooling on your CNC router or use on modern spindle moulders with HSK63 fitting such as Martin, Hoffman, SCM, Panhans etc
HSK-F63 shank for Biesse, Homag, Holz-Her, Felder, IMA, Weeke, SCM, Morbidelli, Masterwood and more!
D=30
Arbor length 100mm
CMT part no:183.310.02
CMT 183 Toolholder for ER40 Collet LH
High Precison Tool holder HSK63F suitable for use with CNC routers. Supplied complete with balanced nut which is anodised coating to reduce resin buildup.
For use with ER40 collet
LH Rotation
HSK chuck for Biesse, Felder Homag, IMA, Weeke, SCM, Morbidelli and Masterwood, Omlat, Hiteco or HSD CNC routers.
RHCMT part no:183.300.01
High Precison Tool holder HSK63F suitable for use with CNC routers. Supplied complete with balanced nut with anodised coating to reduce resin buildup. For use with ER32 collet
RH Rotation
HSK chuck for Biesse, Felder Homag, IMA, Weeke, SCM, Morbidelli and Masterwood, Omlat, Hiteco or HSD CNC routers.
CMT part no:183.300.11
CMT 183 Xtreme HSK63 CNC router tool holder for Er32 Collet with orange chrome shield coating to reduce resin buildup
S=Hsk-F63 RH nut but can be used for right of left hand tool rotation as it has a bearing in the collet nut
CMT part no:183.320.01
CMT 183 CNC Router Toolholder EOC25 with bearing nut so it can be run RH/LH.
For use with DIN6388 type collet
HSK chuck for Homag, Weeke, IMA, Felder,
SCM, Morbidelli and Masterwood machines
CMT part no:195.162.11
CMT 195 long series Upcut spiral CNC router bits with chip-breaker for door lock sets
TECHNICAL DETAILS:
- Premium quality solid TC
- 3 spiral cutting edges (Z3)
- Provides an excellent finish on the lower side of the workpiece
- Upward chip ejection
APPLICATION: used for ripping, template routing, panel sizing and any routing applications in solid wood, or wood composites. Can be used at a high feed speed on well-clamped workpieces
Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors
CMT part no:195.180.11
CMT 195 series Upcut spiral bit with chip breaker
TECHNICAL DETAILS:
- Premium quality solid TC
- 3 spiral cutting edges (Z3)
- Provides an excellent finish on the lower side of the workpiece
- Upward chip ejection
APPLICATION: used for ripping, template routing, panel sizing and any routing applications in solid wood, or wood composites. Can be used at a high feed speed on well-clamped workpieces
Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptors
CMT part no:CMT792
Magnetic Planer Knife Setting Gauge - The best knives won't perform well unless they are properly set and aligned. The built-in permanent magnets grip both the planer block and the knives while you use the integral adjustments to get the knives into perfect position - adjustable in 0.1mm increments.
1. Magnetic ceramic stop
2. Joints with magnetic connectors
3. Precision depth stop with 0.1mm increments
To suit cutterblock diameter 65 - 130mm
The set is supplied in a wooden box with 2 setters
Three options for setting of knives:
Positioning onto the toolholder body with marking onto the original knife; Positioning onto the toolholder body setting with one of the supplied gauges; Positioning directly onto the machine table and the toolholder body.
CMT part no:998.001.03
CMT Formula 2050 SAWBLADE & ROUTER BIT CLEANER
A safe and non toxic formula to break down resin on carbide and steel surfaces, thus allowing greater life between sharpenings.
Saw shops know how to get the most out of cutting tools. They know that the pitch and resin that wood leaves behind greatly shortens the useful life of carbide. We had several quality saw blade sharpeners across the country test our Formula 2050. "Phenomenal" and similar words were heard over and over about the performance of Formula 2050.
Most blade and bit cleaning products work with a disolving action. It takes some powerful and nasty chemicals to dissolve wood residues and adhesives. Our safe and non-toxic Formula 2050 penetrates the microscopic cracks in the resin and attacks the bond between it and the carbide or steel surfaces.
The resin releases its grip and you simply wipe it off. A clean cutting surface runs cooler and works less in the cut. The excess friction of a resin-coated blade causes heat build-up and carbide breakdown. Formula 2050 keeps your tools clean and helps you increase the life span between sharpenings and replacement. Can also be used in ultrasonic cleaning tanks
CMT part no:998.001.01
CMT FORMULA 2050 Blade & Router Bit Cleaner is a safe and non toxic formula to break down resin on carbide and steel surfaces, allowing greater life between sharpenings.
Saw shops know how to get the most out of cutting tools. They know that the pitch and resin that wood leaves behind greatly shortens the useful life of carbide. We had several quality saw blade sharpeners across the country test our Formula 2050. "Phenomenal" and similar words were heard over and over about the performance of Formula 2050.
Most blade and bit cleaning products work with a disolving action. It takes some powerful and nasty chemicals to dissolve wood residues and adhesives. Our safe and non-toxic Formula 2050 penetrates the microscopic cracks in the resin and attacks the bond between it and the carbide or steel surfaces.
The resin releases its grip and you simply wipe it off. A clean cutting surface runs cooler and works less in the cut. The excess friction of a resin-coated blade causes heat build-up and carbide breakdown. Formula 2050 keeps your tools clean and helps you increase the life span between sharpenings and replacement. Can also be used in ultrasonic cleaning tanks
Available in 2 sizes - 500ml spray or 3780ml Can
CMT part no:285.160.48H
Application: for optimal quality crosscuts.
Machines: table and sizing saws, portable machines such as Festool AP/ATF/ TS55 plunge saw, Mafell etc
Material: soft, hard and exotic wood, wood-based panels.
-Tooth Form: ATB 15 degree [Alternate Top Bevel]
- Hook Angle 5 degree
-Teeth height mm: 8
-CHROMIUM ISO grade: KCR06
-Hardness (HV10): 1.950
-Transverse rupture strength (N/mm2): 2.300
Pin hole COMBI3: 2/7/42 + 2/9.5/46.5 + 2/10/60.
Materials: wood, OSB, plywood, melamine, laminate
Applications: cross cutting
Machines: circular saw, mitre saw, slide mitre saw, table saw
Laser-cut high quality steel plate body made with 44 HRC high quality steel and laser-cut to ensure longer life and precision cutting.
Laser-cut heat expansion slots engineered to allow the blade to resist deformation from increases in temperature due to cutting applications and centrifugal forces.
Laser-cut sound dampening slots reduce vibrations and noise by 10% compared to blades without it. *This feature improves cut quality and extends blade life. *In full compliance with National Noise Emission Standards and Regulations.
Silver brazing silver alloy brazing prevents carbide from breaking during the cooling process and allows teeth to withstand high stress and impact especially when cutting harder woods and composite materials.
Industrial sinterhip hi-density carbide the sinterhip sintering process (Hot Isostatic Pressing) uses high temperature (up to 3500 degreesF) and high pressure (up to 1500 psi) to fully consolidate carbide thereby resulting in a porosity-free product ensuring longer cutting life over traditional carbide and less risk of breakages.
Precision sharpening each tooth is precision ground on a multi-axis CNC machine creating perfect edge angles that provide extra-clean cutting performance and extended life. Featuring less than 0.35 µm Rmax in edge roughness.
Orange Shield non-stick PTFE coating:
- Protects against corrosion and rust.
- Reduces resin and residue build-up.
- Reduces overheating and blade drag.
- Improves performance and cutting life.
CMT part no:294.060.11M
Special saw CMT saw blade for Festool Kapex KS 120 is a negative rake saw blade specially designed general purpose sawblade for the Festool Kapex chopsaws.This blade is ideal for all round high performance in natural wood, ply, MDF and other wood based materials. The negative hook angle helps to hold the work down and back into the cutting fence and also helping to reduce tear out.
APPLICATION: for optimal quality rip and crosscuts.
MACHINES: Festool Kapex
MATERIAL: soft and hardwood, wood-based panels.
D=260
B= 2.5
d= 30
-5 Negative Rake
CMT part no:317.150.61
TECHNICAL DETAILS:
- Super-strength steel
- PCD [Poly Crystaline Diamond] head with precision balanced centre point
- 2 PCD precision ground cutting edges [Z2]
- 2 PCD negatively ground spurs [V2]
- Parallel shank with driving flat and length adjusting screw.
APPLICATION: ideal for hinges. Use on boring machines equipped with adaptors or chucks.
Use for drilling accurate and clean-cut blind holes in wood composites, plastic and laminated materials.
PCD - Gives boring performance upto 20 times longer than HW materials.
CMT part no:317.350.61
TECHNICAL DETAILS:
- Super-strength steel
- PCD [Poly Crystaline Diamond] head with precision balanced centre point
- 2 PCD precision ground cutting edges [Z2]
- 2 PCD negatively ground spurs [V2]
- Parallel shank with driving flat and length adjusting screw.
APPLICATION: ideal for hinges. Use on boring machines equipped with adaptors or chucks.
Use for drilling accurate and clean-cut blind holes in wood composites, plastic and laminated materials.
PCD - Gives boring performance upto 20 times longer than HW materials
CMT part no:998.002.03
This new CMT Lubricant Spray For Wood - Neutralises resin, preventing it from inhibiting the feeding of timber over machine beds. The anti corrosive properties, give excellent performance against humidity and bed rust
5L Bulk can
CMT part no:537.000.12
We offer a wide range of Forstner bits in the most popular diameters.
These bits are available separately or in sets. The high performance stagger tooth design on the bits with larger diametres allows for sharp holes with straight sides and flat bottoms. Bits available for drill presses, electric and cordless drills and suitable to work on any type of softwood.
Sizes:
¥10-12-14-15-16-18-20-22-25-26-30-35mm
supplied in a see through clamshell packaging.
CMT part no:661.030.41
Roundover bits with two replaceable knives fixed by special Torx screws. The blades are 4 sided profiled and give high economy of your work with laminates. For precision work on laminates.
Radius R2 or R3 is for rounded 2mm or 3mm ABS edges, MDF and wood;
same bits can take 1mm, 1,5mm, 2mm and 3mm radius cutters.
Hw Z2 S=8 D=12,7 L=57,5 R=3 RH
For use on portable Routers.
R=1.0 CM79001004
R=1.5 CM79001504
R=2.0 CM79002004
R=3.0 CM79003004
CMT part no:662.160.11
TECHNICAL DETAILS:
- Super strength steel (heavy-duty material)
- 2 cutting edges [Z2R]
- Chip-breaker teeth
APPLICATION: used for ripping, template routing, panel sizing
and any routing application on solid wood, or wood composites.
Can be used at a high feed speed on well-clamped
workpieces.
Can be used on machining centres, point to point machines,
CNC routers
* The 95mm length is achieved in 3-4 passes.
For spare tips:
CM7902302R - tip with 2 chip breaker grooves
CM7902303R - tip with 2 chip breaker grooves
High quality neoprene cord used on CNC routers to create vacuum sealed zones on work tables and jigs. D = 8 mmIn Stock€53.96€64.75As low as €55.04
Aigner Bowmould master shaping guard is a patented modular system that allows fast and safe machining on curved work. It can be used for either left hand or right hand machining and comes with infinitely adjustable infeed guide, dust shields suitable for tool diameters up to 150mm and suitable for either hand or power feed use. The unti features integrated dust and chip collection with dust spigot to rear. Tools are easily visible through the transparent shield. The spring-loaded shield is used to adjust the necessary pressure on the workpiece. Optional equipment: Curved moulding stop, slips on the arbor to allow precise depth of moulding adjustment. Optional guide wheels can also be used for safe accurate guiding. Features: Fully adjustable guard brushes; Brake shoe integrated in the starting strip which may be swung through 90 degrees from its working position into its inoperative position and vice versa. In both positions it is automatically locked, and ensures stopping of the starting ring. Maximum tool diameter 220mmIn StockList €1,243.30€956.93Inc Vat €1,148.32
The Aigner table extensions are part of the modular range of accessories. The basic table is 1100mm long and 170mm wide, and can be clipped on and off machines in seconds when not in use. A range of optional rail lengths are available for mounting. With the use of a lionking clamp (AI212226000172), 2 units can be connected to give 2200mm support or multiple units can be mounted side by side for wider support. These table extensions are ideal for bandsaws, shapers, spindle moulders, circular saws etc. The fold down leg locks into place and offers a wide range of height adjustment. Useful additions such asthe optional back stroke protection make it an invaluable aid when producing 'stop mouldings'. Additionally, it supports other units such as CirQuick, Segmenter etc for cutting arcs and curves. Features: Solid table made of anodised aluminium Weight 6kg Shipping Dims 120 x 23 x 6cm NOTE - Mounting rails should be purchased separately Option to extend the length:AI212226000172 Aigner Coupling bracket to join 2 tablesIn StockList €303.62€221.85Inc Vat €266.22
Aigner Integral Fence System - 500mm infeed + 500mm outfeed A beautifully engineered fence system with revolutionary features for safe and accurate setting on spindle moulders and shapers. On spindle moulders the opening in the tool area is always problematic. The Aigner integral fence provides a guiding area without any gap, by using an integrated set of fingers that can be swung across to provide continuous support. The fingers have micro adjustment in the vertical plane allowing them to give maximum support. Additional safety, working, and support units can be mounted on to the integral fence. These include the flush fix, support rail, pressure module, filling bar and spreader. The anodised finish on the fence surfaces reduces friction and gives a wear resistant finish. Features: - Four versions available, making the fences suitable for most spindle moulders - Mounting and adjusting can be done quickly and simply without additional tools - Exact setting to tool diameter and tool height is possible thanks to continuous adjustability Central fence mounting bolt can sit 45 - 80mm height from machine bedLead Time: 9 DaysList €2,095.18€1,552.92Inc Vat €1,863.50
FME Handheld Moisture Meter - for the professional in the wood industry Fast and accurate measurement of 79 wood species and 8 construction materials. The tool for the true professional in the woodworking and construction industry. The FME has the same sensor technology as the FMD-Plus assuring an accuracy of 0,2 %. The FME calculates measurement data for 79 individual wood species 4 common wood groups 8 popular building materials like concrete, MDF or gypsum. The internal memory can hold up to 50 measurements, through which you can scroll using the instrument's panel keys. Connect our optional temperature sensor for automatic temperature correction. The standard kit includes the FME Meter A Hammer Probe Assorted insulated and non-insulated pins a manual and cabling Optionally you can order a Handgrip probe a Reference resistor an external temperature sensor to connect to the meterLead Time: 80 DaysList €1,581.46€1,197.97Inc Vat €1,437.56
CMT part no:183.362.00 CMT 183 Cutter Arbor to take cutter blocks with 40mm Bore - ideal for using spindle moulder tooling on your CNC router or use on modern spindle moulders with HSK63 fitting such as Martin, Hoffman, SCM, Panhans etc HSK-F63 shank for Biesse, Homag, Holz-Her, Felder, IMA, Weeke, SCM, Morbidelli, Masterwood and more! HSK-F63 shank D=40 Arbor length 100mmIn Stock
CMT part no:183.360.00 CMT 183 Cutter Arbor to take cutter blocks with 30mm Bore - ideal for using spindle moulder tooling on your CNC router or use on modern spindle moulders with HSK63 fitting such as Martin, Hoffman, SCM, Panhans etc HSK-F63 shank for Biesse, Homag, Holz-Her, Felder, IMA, Weeke, SCM, Morbidelli, Masterwood and more! D=30 Arbor length 100mmIn Stock
CMT part no:183.310.02 CMT 183 Toolholder for ER40 Collet LH High Precison Tool holder HSK63F suitable for use with CNC routers. Supplied complete with balanced nut which is anodised coating to reduce resin buildup. For use with ER40 collet LH Rotation HSK chuck for Biesse, Felder Homag, IMA, Weeke, SCM, Morbidelli and Masterwood, Omlat, Hiteco or HSD CNC routers.Lead Time: 17 Days
RHCMT part no:183.300.01 High Precison Tool holder HSK63F suitable for use with CNC routers. Supplied complete with balanced nut with anodised coating to reduce resin buildup. For use with ER32 collet RH Rotation HSK chuck for Biesse, Felder Homag, IMA, Weeke, SCM, Morbidelli and Masterwood, Omlat, Hiteco or HSD CNC routers.In Stock
CMT part no:195.162.11 CMT 195 long series Upcut spiral CNC router bits with chip-breaker for door lock sets TECHNICAL DETAILS: - Premium quality solid TC - 3 spiral cutting edges (Z3) - Provides an excellent finish on the lower side of the workpiece - Upward chip ejection APPLICATION: used for ripping, template routing, panel sizing and any routing applications in solid wood, or wood composites. Can be used at a high feed speed on well-clamped workpieces Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptorsIn Stock
CMT part no:195.180.11 CMT 195 series Upcut spiral bit with chip breaker TECHNICAL DETAILS: - Premium quality solid TC - 3 spiral cutting edges (Z3) - Provides an excellent finish on the lower side of the workpiece - Upward chip ejection APPLICATION: used for ripping, template routing, panel sizing and any routing applications in solid wood, or wood composites. Can be used at a high feed speed on well-clamped workpieces Can be used on machining centres, point to point machines, CNC routers and hand-held routers equipped with chucks or adaptorsIn Stock
CMT part no:CMT792 Magnetic Planer Knife Setting Gauge - The best knives won't perform well unless they are properly set and aligned. The built-in permanent magnets grip both the planer block and the knives while you use the integral adjustments to get the knives into perfect position - adjustable in 0.1mm increments. 1. Magnetic ceramic stop 2. Joints with magnetic connectors 3. Precision depth stop with 0.1mm increments To suit cutterblock diameter 65 - 130mm The set is supplied in a wooden box with 2 setters Three options for setting of knives: Positioning onto the toolholder body with marking onto the original knife; Positioning onto the toolholder body setting with one of the supplied gauges; Positioning directly onto the machine table and the toolholder body.In StockList €142.46€101.93Inc Vat €122.32
CMT part no:998.001.03 CMT Formula 2050 SAWBLADE & ROUTER BIT CLEANER A safe and non toxic formula to break down resin on carbide and steel surfaces, thus allowing greater life between sharpenings. Saw shops know how to get the most out of cutting tools. They know that the pitch and resin that wood leaves behind greatly shortens the useful life of carbide. We had several quality saw blade sharpeners across the country test our Formula 2050. "Phenomenal" and similar words were heard over and over about the performance of Formula 2050. Most blade and bit cleaning products work with a disolving action. It takes some powerful and nasty chemicals to dissolve wood residues and adhesives. Our safe and non-toxic Formula 2050 penetrates the microscopic cracks in the resin and attacks the bond between it and the carbide or steel surfaces. The resin releases its grip and you simply wipe it off. A clean cutting surface runs cooler and works less in the cut. The excess friction of a resin-coated blade causes heat build-up and carbide breakdown. Formula 2050 keeps your tools clean and helps you increase the life span between sharpenings and replacement. Can also be used in ultrasonic cleaning tanksIn Stock
CMT part no:998.001.01 CMT FORMULA 2050 Blade & Router Bit Cleaner is a safe and non toxic formula to break down resin on carbide and steel surfaces, allowing greater life between sharpenings. Saw shops know how to get the most out of cutting tools. They know that the pitch and resin that wood leaves behind greatly shortens the useful life of carbide. We had several quality saw blade sharpeners across the country test our Formula 2050. "Phenomenal" and similar words were heard over and over about the performance of Formula 2050. Most blade and bit cleaning products work with a disolving action. It takes some powerful and nasty chemicals to dissolve wood residues and adhesives. Our safe and non-toxic Formula 2050 penetrates the microscopic cracks in the resin and attacks the bond between it and the carbide or steel surfaces. The resin releases its grip and you simply wipe it off. A clean cutting surface runs cooler and works less in the cut. The excess friction of a resin-coated blade causes heat build-up and carbide breakdown. Formula 2050 keeps your tools clean and helps you increase the life span between sharpenings and replacement. Can also be used in ultrasonic cleaning tanks Available in 2 sizes - 500ml spray or 3780ml CanIn Stock
CMT part no:285.160.48H Application: for optimal quality crosscuts. Machines: table and sizing saws, portable machines such as Festool AP/ATF/ TS55 plunge saw, Mafell etc Material: soft, hard and exotic wood, wood-based panels. -Tooth Form: ATB 15 degree [Alternate Top Bevel] - Hook Angle 5 degree -Teeth height mm: 8 -CHROMIUM ISO grade: KCR06 -Hardness (HV10): 1.950 -Transverse rupture strength (N/mm2): 2.300 Pin hole COMBI3: 2/7/42 + 2/9.5/46.5 + 2/10/60. Materials: wood, OSB, plywood, melamine, laminate Applications: cross cutting Machines: circular saw, mitre saw, slide mitre saw, table saw Laser-cut high quality steel plate body made with 44 HRC high quality steel and laser-cut to ensure longer life and precision cutting. Laser-cut heat expansion slots engineered to allow the blade to resist deformation from increases in temperature due to cutting applications and centrifugal forces. Laser-cut sound dampening slots reduce vibrations and noise by 10% compared to blades without it. *This feature improves cut quality and extends blade life. *In full compliance with National Noise Emission Standards and Regulations. Silver brazing silver alloy brazing prevents carbide from breaking during the cooling process and allows teeth to withstand high stress and impact especially when cutting harder woods and composite materials. Industrial sinterhip hi-density carbide the sinterhip sintering process (Hot Isostatic Pressing) uses high temperature (up to 3500 degreesF) and high pressure (up to 1500 psi) to fully consolidate carbide thereby resulting in a porosity-free product ensuring longer cutting life over traditional carbide and less risk of breakages. Precision sharpening each tooth is precision ground on a multi-axis CNC machine creating perfect edge angles that provide extra-clean cutting performance and extended life. Featuring less than 0.35 µm Rmax in edge roughness. Orange Shield non-stick PTFE coating: - Protects against corrosion and rust. - Reduces resin and residue build-up. - Reduces overheating and blade drag. - Improves performance and cutting life.In Stock
CMT part no:294.060.11M Special saw CMT saw blade for Festool Kapex KS 120 is a negative rake saw blade specially designed general purpose sawblade for the Festool Kapex chopsaws.This blade is ideal for all round high performance in natural wood, ply, MDF and other wood based materials. The negative hook angle helps to hold the work down and back into the cutting fence and also helping to reduce tear out. APPLICATION: for optimal quality rip and crosscuts. MACHINES: Festool Kapex MATERIAL: soft and hardwood, wood-based panels. D=260 B= 2.5 d= 30 -5 Negative RakeIn Stock
CMT part no:317.150.61 TECHNICAL DETAILS: - Super-strength steel - PCD [Poly Crystaline Diamond] head with precision balanced centre point - 2 PCD precision ground cutting edges [Z2] - 2 PCD negatively ground spurs [V2] - Parallel shank with driving flat and length adjusting screw. APPLICATION: ideal for hinges. Use on boring machines equipped with adaptors or chucks. Use for drilling accurate and clean-cut blind holes in wood composites, plastic and laminated materials. PCD - Gives boring performance upto 20 times longer than HW materials.Lead Time: 17 Days
CMT part no:317.350.61 TECHNICAL DETAILS: - Super-strength steel - PCD [Poly Crystaline Diamond] head with precision balanced centre point - 2 PCD precision ground cutting edges [Z2] - 2 PCD negatively ground spurs [V2] - Parallel shank with driving flat and length adjusting screw. APPLICATION: ideal for hinges. Use on boring machines equipped with adaptors or chucks. Use for drilling accurate and clean-cut blind holes in wood composites, plastic and laminated materials. PCD - Gives boring performance upto 20 times longer than HW materialsIn Stock
CMT part no:537.000.12 We offer a wide range of Forstner bits in the most popular diameters. These bits are available separately or in sets. The high performance stagger tooth design on the bits with larger diametres allows for sharp holes with straight sides and flat bottoms. Bits available for drill presses, electric and cordless drills and suitable to work on any type of softwood. Sizes: ¥10-12-14-15-16-18-20-22-25-26-30-35mm supplied in a see through clamshell packaging.In StockList €178.44€116.32Inc Vat €139.58
CMT part no:661.030.41 Roundover bits with two replaceable knives fixed by special Torx screws. The blades are 4 sided profiled and give high economy of your work with laminates. For precision work on laminates. Radius R2 or R3 is for rounded 2mm or 3mm ABS edges, MDF and wood; same bits can take 1mm, 1,5mm, 2mm and 3mm radius cutters. Hw Z2 S=8 D=12,7 L=57,5 R=3 RH For use on portable Routers. R=1.0 CM79001004 R=1.5 CM79001504 R=2.0 CM79002004 R=3.0 CM79003004Lead Time: 17 DaysList €139.58€94.73Inc Vat €113.68
CMT part no:662.160.11 TECHNICAL DETAILS: - Super strength steel (heavy-duty material) - 2 cutting edges [Z2R] - Chip-breaker teeth APPLICATION: used for ripping, template routing, panel sizing and any routing application on solid wood, or wood composites. Can be used at a high feed speed on well-clamped workpieces. Can be used on machining centres, point to point machines, CNC routers * The 95mm length is achieved in 3-4 passes. For spare tips: CM7902302R - tip with 2 chip breaker grooves CM7902303R - tip with 2 chip breaker groovesIn StockList €1,036.08€452.09Inc Vat €542.51
