Aigner Cutter frame for smaller (150mm capacity) BowmouldMaster
Used on the table of the machine as a support for workpieces when clamped onto the BowmouldMaster
CMT part no:CMT792
Magnetic Planer Knife Setting Gauge - The best knives won't perform well unless they are properly set and aligned. The built-in permanent magnets grip both the planer block and the knives while you use the integral adjustments to get the knives into perfect position - adjustable in 0.1mm increments.
1. Magnetic ceramic stop
2. Joints with magnetic connectors
3. Precision depth stop with 0.1mm increments
To suit cutterblock diameter 65 - 130mm
The set is supplied in a wooden box with 2 setters
Three options for setting of knives:
Positioning onto the toolholder body with marking onto the original knife; Positioning onto the toolholder body setting with one of the supplied gauges; Positioning directly onto the machine table and the toolholder body.
CMT part no:183-HSK
A new universal assembly support system for setting your tools in HSK-F63 tool holders. The innovation lies in the special bi-directional roller bearings which clamp the tool holder to the flange. This unique system offers maximum protection to the tool taper and clamps are no longer needed
D=63mm
CMT part no:183-ISO
A new universal assembly support system for HSK-F63 and ISO 30 chucks. The innovation lies in the special bi-directional roller bearings which clamp the tool holder to the flange. This unique system offers maximum protection to the tool taper and clamps are no longer needed
D=50mm
Braun Hebor H50 dial gauge readout which can be used for accurate setting of spindle moulder tooling.
It can be used across fences or across the cutter against the table giving a precise readout of the depth and height of a cut. this eliminates the requirement for test pieces thus enhancing workshop safety.
the unit can also be used to determine the depth of mouldings and for a host of other uses in the workshop
The Preset P368 is a precise instrument, easy and quick to use: these characteristics have been especially designed to meet the requirements of the CNC machine operator. It is used the wood, metal and glass machining industrieswhere the tools must be preset or adjusted. It can be used for both measuring lengths as well as radius of the tools.
- Excellent quality
- Considerable cutback of set up times
- It measures all types of tools
- Does not require connection to electrical mains
- Display with large numbers
- Interchangeable cone holder (ISO, HSK, VDI arbors)
The Preset P368LR, can be used for both measuring lengths as well as the radius of the tools.
Comes complete with cone holder ISO or HSK [specifiy when ordering].
Planer block setting stand for planer moulder: the block is placed on the arbor and the knives are withdrawn outwards against the inside of the flanges thus guaranteeing that they are always in the same 125mm cutting circle. d=40
Panhans 1533 Magnetic Planer Setting Gauge
Perfect planing results do not only require well sharpened planer knives but also their exact setting. For adjustment of the planer knives practical experiance and corresponding time was needed.
The device has been designed with permanent magents which adheres to the cutter block and not the knife, so that both hands are free for setting and tightening the knives. The setting devices don't need to be held down any more.
The knive projection may always be exactly set due to the adjustable stops 0.1mm adjustments.
Will suit steel shaft diameters from 80-145mm
The radius measuring stand is a precision device of simple and quick use, suitable to measure the radius of profiled cutterheads.
Before mounting the tools in a machine it is absolutely important to know the correct dimensions of the cutter and set them in order to
start the production without any additional concerns.
The Preset P322 was designed and developed in collaboration with technicians who work daily with these type of tools, having troubles
with setting operations. The result is an optimization of the production and a good saving of time.
Specify arbor size when ordering
Arbors available:
30, 35, 40, 1 1/4", 1 1/2", 1 13/16"
Main features
Arbor height: 230 mm
R max (cutterhead radius): 120 mm
Digital readout:
Resolution: 0,01 mm
Readout in mm/inches
Battery-power (SR44)
Operating temperature range: 0/+40?<
Storage temperature range: -10/+60?<
Umidity: . 80%