Press Plattens & Spares
(14 Products)
Find Replacement press plates, spares and plattens for veneer presses, we have spares for Interwood, Italpresse, Stetson, Tiger, Burkle
-
ACMOS 1124B is a preventative release agent paste for veneer presses which use urea formaldehyde & melamine resin adhesives. This compound does not contain oils or silicones. It is designed to protect the the press platens & veneered surfaces have reduced adhesion to the press plates - residual adhesive can be removed easily without damaging the platen surfaces. Can be used on cold & hot platen presses. Application: Apply a thin coating of 1124B paste using a cloth or felt pad to the top & bottom plates. it is best to apply paste on a heated surface as this helps produce a dense, cured resistant protective film. Reapply on a regular basis depending on production use to help prevent further adhesive adherence to plates.In StockList €139.58€95.93Inc Vat €115.12 -
Replacement anodised electrically heated intermediLead Time: 30 Days€ Enquire -
Replacement anodised electrically heated intermediLead Time: 30 Days€ Enquire -
-
-
-
- Dimensions 2550 x 1300mm
- Thickness 41mm + 9mm
- Max temperature 120 deg. Cel
Lead Time: 30 Days€ Enquire -
-
-
-
Mylar protective sheet for platen size L= 3.0-3.2m length hot press Mylar sheeting to suit all hydraulic press platens The material is 1.65 metres in width and is sold in a 7m length to afford coverage to two platens of most standard machines with plenty of overlap It's widely used throughout the woodworking industry as a protective layer for heated platens on hydraulic presses. Mylar is a polyester film and is offered at 250 micron (0.25 mm) thick, and is capable of withstanding temperatures of up to 130 degrees centigrade. This will also withstand very high pressures and has a high tensile strength. Please note this is also available by special order only at 500 microns, Price on application.In Stock€197.86€237.43 -
Mylar protective sheet for platen size L= 3.5 - 3,8m Mylar sheeting to suit all hydraulic press platens The material is 1.65 metres in width and is sold in a 8m length to afford coverage to two platens of most standard machines. It's widely used throughout the woodworking industry as a protective layer for platens on hydraulic presses. Mylar is a polyester film and is offered at 250 micron (0.25 mm) thick, and is capable of withstanding temperatures of up to 130 degrees centigrade. This will also withstand very high pressures and has a high tensile strength. Please note this is also available by special order only at 500 microns, Price on application.In Stock€221.85€266.22
