ProScale allows you to upgrade all types of machines-Saws borers, moulders, thicknessers, sanders, tenoners etc. Proscale will add digitl precision to your machine setting, saving money.
8"/200mm Electronic Digital vernier caliper (large screen)
with on/off switch and inch/metric conversion.
Features: inch/metric conversion, zero setting button, depth measuring blade, body made from stainless steel.
includes: protective case and battery.
can be used for measuring internal, external and depths.
12"/300mm Electronic Digital vernier caliper (large screen)
with on/off switch and inch/metric conversion.
Features: inch/metric conversion, zero setting button, depth measuring blade, body made from stainless steel.
includes: protective case and battery.
can be used for measuring internal, external and depths.
Aigner Mounting Adapter I
A universal component which allows saftey and working units to be mounted on machines which have rounded guide bars rather than a flat face available
Guide bar capacity 24 - 55mm diameter
Height adjusting range 10 - 40mm
Length of adapter 172mm
Suitable for mounting for distance between bar centre and table edge up to 60mm
Aigner Mounting Adapter II
A universal component which allows saftey and working units to be mounted on machines which have rounded guide bars rather than a flat face available
Guide bar capacity 24 - 55mm diameter
Height adjusting range 10 - 40mm
Length of adapter 172mm
Suitable for mounting for distance between bar centre and table edge up to 220mm
Aigner Powerfeed protector is a handy spacer that allows you to preset the feed unit position and optimise the angle. This saves valuable set up time and saves your feed rollers from coming into contact with the cutter block or damaging the fences
The clamping lever allows fine positional adjustment
One unit consists of:
A= Maximum shift to either side 75mm
B= Clamping lever
C= Plastic end cap protection
D= Four socket head cap screws for fastening the spacer to the feed unit, interchangeable with the hex-socket set screws E
E= Eight hex-socket screws to compensate uneven mounting surfaces.
DD52R-AN-000.50-S-C3 Grey
Anticlockwise horizontal shaft indicator 000.50 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-AN-000.50-S-C3 Grey+RB
Anticlockwise horizontal shaft indicator 000.50 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-FN-000.50-S-C3 Grey
Anticlockwise horizontal shaft indicator 000.50 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-FN-000.50-S-C3 Grey+RB
Anticlockwise horizontal shaft indicator 000.50 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-AN-0001.0-S-C3 Grey
Anticlockwise horizontal shaft indicator 0001.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-AN-0001.0-S-C3 Grey+RB
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Anticlockwise horizontal shaft indicator 0001.0 per revolution
DD52R-FN-0001.0-S-C3 Grey
Anticlockwise horizontal shaft indicator 0001.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-FN-0001.0-S-C3 Grey+RB
Anticlockwise horizontal shaft indicator 0001.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-AN-0002.0-S-C3 Grey
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Anticlockwise horizontal shaft indicator 0002.0 per revolution
DD52R-AN-0002.0-S-C3 Grey+RB
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Anticlockwise horizontal shaft indicator 0002.0 per revolution
DD52R-FN-0002.0-S-C3 Grey
Anticlockwise horizontal shaft indicator 0002.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-FN-0002.0-S-C3 Grey+RB
Anticlockwise horizontal shaft indicator 0002.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-AN-0002.5-S-C3 Grey
Anticlockwise horizontal shaft indicator 0002.5 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-AN-0002.5-S-C3 Grey+RB
Anticlockwise horizontal shaft indicator 0002.5 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-FN-0002.5-S-C3 Grey
Anticlockwise horizontal shaft indicator 0002.5 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-FN-0002.5-S-C3 Grey+RB
Anticlockwise horizontal shaft indicator 0002.5 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-AN-0003.0-S-C3 Grey
Anticlockwise horizontal shaft indicator 0003.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-AN-0003.0-S-C3 Grey+RB
Anticlockwise horizontal shaft indicator 0003.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-FN-0003.0-S-C3 Grey
Anticlockwise horizontal shaft indicator 0003.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-FN-0003.0-S-C3 Grey+RB
Anticlockwise horizontal shaft indicator 0003.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-AN-0004.0-S-C3 Grey
Anticlockwise horizontal shaft indicator 0004.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-AN-0004.0-S-C3 Grey+RB
Anticlockwise horizontal shaft indicator 0004.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-FN-0004.0-S-C3 Grey
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Anticlockwise horizontal shaft indicator 0004.0 per revolution
DD52R-FN-0004.0-S-C3 Grey+RB
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Anticlockwise horizontal shaft indicator 0004.0 per revolution
DD52R-AN-0005.0-S-C3 Grey
Anticlockwise horizontal shaft indicator 0005.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-AN-0005.0-S-C3 Grey+RB
Anticlockwise horizontal shaft indicator 0005.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-FN-0005.0-S-C3 Grey
Anticlockwise horizontal shaft indicator 0005.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-FN-0005.0-S-C3 Grey+RB
Anticlockwise horizontal shaft indicator 0005.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits
DD52R-AN-0006.0-S-C3 Grey
Anticlockwise horizontal shaft indicator 0006.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-AN-0006.0-S-C3 Grey+RB
Anticlockwise horizontal shaft indicator 0006.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-FN-0006.0-S-C3 Grey
Anticlockwise horizontal shaft indicator 0006.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-FN-0006.0-S-C3 Grey+RB
Anticlockwise horizontal shaft indicator 0006.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-AN-001.00-S-C3 Grey
Anticlockwise horizontal shaft indicator 001.00 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-AN-001.00-S-C3 Grey+RB
Anticlockwise horizontal shaft indicator 001.00 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-FN-001.00-S-C3 Grey
Anticlockwise horizontal shaft indicator 001.00 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-FN-001.00-S-C3 Grey+RB
Anticlockwise horizontal shaft indicator 001.00 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-AN-0010.0-S-C3 Grey
Anticlockwise horizontal shaft indicator 0010.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-AN-0010.0-S-C3 Grey+RB
Anticlockwise horizontal shaft indicator 0010.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-FN-0010.0-S-C3 Grey
Anticlockwise horizontal shaft indicator 0010.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
DD52R-FN-0010.0-S-C3 Grey+RB
Anticlockwise horizontal shaft indicator 0010.0 per revolution
Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.
ProScale allows you to upgrade all types of machines-Saws borers, moulders, thicknessers, sanders, tenoners etc. Proscale will add digitl precision to your machine setting, saving money.Lead Time: 30 Days€1,433.00€1,719.60
8"/200mm Electronic Digital vernier caliper (large screen) with on/off switch and inch/metric conversion. Features: inch/metric conversion, zero setting button, depth measuring blade, body made from stainless steel. includes: protective case and battery. can be used for measuring internal, external and depths.In Stock€ Enquire
12"/300mm Electronic Digital vernier caliper (large screen) with on/off switch and inch/metric conversion. Features: inch/metric conversion, zero setting button, depth measuring blade, body made from stainless steel. includes: protective case and battery. can be used for measuring internal, external and depths.In Stock€ Enquire
Aigner Mounting Adapter I A universal component which allows saftey and working units to be mounted on machines which have rounded guide bars rather than a flat face available Guide bar capacity 24 - 55mm diameter Height adjusting range 10 - 40mm Length of adapter 172mm Suitable for mounting for distance between bar centre and table edge up to 60mmLead Time: 39 Days€170.28€204.34
Aigner Mounting Adapter II A universal component which allows saftey and working units to be mounted on machines which have rounded guide bars rather than a flat face available Guide bar capacity 24 - 55mm diameter Height adjusting range 10 - 40mm Length of adapter 172mm Suitable for mounting for distance between bar centre and table edge up to 220mmIn Stock€178.68€214.42
Aigner Powerfeed protector is a handy spacer that allows you to preset the feed unit position and optimise the angle. This saves valuable set up time and saves your feed rollers from coming into contact with the cutter block or damaging the fences The clamping lever allows fine positional adjustment One unit consists of: A= Maximum shift to either side 75mm B= Clamping lever C= Plastic end cap protection D= Four socket head cap screws for fastening the spacer to the feed unit, interchangeable with the hex-socket set screws E E= Eight hex-socket screws to compensate uneven mounting surfaces.In Stock€76.75€92.10
DD52R-AN-000.50-S-C3 Grey Anticlockwise horizontal shaft indicator 000.50 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €92.10€70.75Inc Vat €84.90
DD52R-AN-000.50-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 000.50 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €94.97€71.95Inc Vat €86.34
DD52R-FN-000.50-S-C3 Grey Anticlockwise horizontal shaft indicator 000.50 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €92.10€70.75Inc Vat €84.90
DD52R-FN-000.50-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 000.50 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €94.97€71.95Inc Vat €86.34
DD52R-AN-0001.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0001.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €92.10€70.75Inc Vat €84.90
DD52R-AN-0001.0-S-C3 Grey+RB Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Anticlockwise horizontal shaft indicator 0001.0 per revolutionLead Time: 6 DaysList €94.97€71.95Inc Vat €86.34
DD52R-FN-0001.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0001.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €92.10€70.75Inc Vat €84.90
DD52R-FN-0001.0-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0001.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €94.97€71.95Inc Vat €86.34
DD52R-AN-0002.0-S-C3 Grey Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Anticlockwise horizontal shaft indicator 0002.0 per revolutionLead Time: 6 DaysList €92.10€70.75Inc Vat €84.90
DD52R-AN-0002.0-S-C3 Grey+RB Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Anticlockwise horizontal shaft indicator 0002.0 per revolutionLead Time: 6 DaysList €94.97€71.95Inc Vat €86.34
DD52R-FN-0002.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0002.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €92.10€70.75Inc Vat €84.90
DD52R-FN-0002.0-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0002.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €94.97€71.95Inc Vat €86.34
DD52R-AN-0002.5-S-C3 Grey Anticlockwise horizontal shaft indicator 0002.5 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €92.10€70.75Inc Vat €84.90
DD52R-AN-0002.5-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0002.5 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €94.97€71.95Inc Vat €86.34
DD52R-FN-0002.5-S-C3 Grey Anticlockwise horizontal shaft indicator 0002.5 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €92.10€70.75Inc Vat €84.90
DD52R-FN-0002.5-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0002.5 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €94.97€71.95Inc Vat €86.34
DD52R-AN-0003.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0003.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €92.10€70.75Inc Vat €84.90
DD52R-AN-0003.0-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0003.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €94.97€71.95Inc Vat €86.34
DD52R-FN-0003.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0003.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €92.10€70.75Inc Vat €84.90
DD52R-FN-0003.0-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0003.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €94.97€71.95Inc Vat €86.34
DD52R-AN-0004.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0004.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €92.10€70.75Inc Vat €84.90
DD52R-AN-0004.0-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0004.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €94.97€71.95Inc Vat €86.34
DD52R-FN-0004.0-S-C3 Grey Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Anticlockwise horizontal shaft indicator 0004.0 per revolutionLead Time: 6 DaysList €92.10€70.75Inc Vat €84.90
DD52R-FN-0004.0-S-C3 Grey+RB Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Anticlockwise horizontal shaft indicator 0004.0 per revolutionLead Time: 6 DaysList €94.97€71.95Inc Vat €86.34
DD52R-AN-0005.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0005.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €92.10€70.75Inc Vat €84.90
DD52R-AN-0005.0-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0005.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €94.97€71.95Inc Vat €86.34
DD52R-FN-0005.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0005.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €92.10€70.75Inc Vat €84.90
DD52R-FN-0005.0-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0005.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digitsLead Time: 6 DaysList €94.97€71.95Inc Vat €86.34
DD52R-AN-0006.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0006.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €92.10€70.75Inc Vat €84.90
DD52R-AN-0006.0-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0006.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €94.97€71.95Inc Vat €86.34
DD52R-FN-0006.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0006.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €92.10€70.75Inc Vat €84.90
DD52R-FN-0006.0-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0006.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €94.97€71.95Inc Vat €86.34
DD52R-AN-001.00-S-C3 Grey Anticlockwise horizontal shaft indicator 001.00 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €92.10€70.75Inc Vat €84.90
DD52R-AN-001.00-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 001.00 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €94.97€71.95Inc Vat €86.34
DD52R-FN-001.00-S-C3 Grey Anticlockwise horizontal shaft indicator 001.00 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €92.10€70.75Inc Vat €84.90
DD52R-FN-001.00-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 001.00 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €94.97€71.95Inc Vat €86.34
DD52R-AN-0010.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0010.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €92.10€70.75Inc Vat €84.90
DD52R-AN-0010.0-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0010.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €94.97€71.95Inc Vat €86.34
DD52R-FN-0010.0-S-C3 Grey Anticlockwise horizontal shaft indicator 0010.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €92.10€70.75Inc Vat €84.90
DD52R-FN-0010.0-S-C3 Grey+RB Anticlockwise horizontal shaft indicator 0010.0 per revolution Mechanical direct drive digital position indicator in high-resistance polyamide based (PA) technopolymer. Transparent polyamide based (PA-T) technopolymer window with 5 digit counter, 4 black digits and 1 red digit to show decimal values. Steel boss 20mm dia H7 reamed hole to fit shaft with locking by means of a grub screw. A 6mm dia x 10mm deep hole is required in mounting face to accept rear pin to prevent unwanted rotation of the unit. These units are designed for use on horizontal shafts with an anticlockwise rotation to increase the reading per revolution by the internal ratio specified by the 5 digits.Lead Time: 6 DaysList €94.97€71.95Inc Vat €86.34
