Aigner Cutter frame for smaller (150mm capacity) BowmouldMaster
Used on the table of the machine as a support for workpieces when clamped onto the BowmouldMaster
Aigner Cutter frame for smaller (220mm capacity) BowmouldMaster
Used on the table of the machine as a support for workpieces when clamped onto the BowmouldMaster
Aigner Bowmould master shaping guard is a patented modular system that allows fast and safe machining on curved work. It can be used for either left hand or right hand machining and comes with infinitely adjustable infeed guide, dust shields suitable for tool diameters up to 150mm and suitable for either hand or power feed use. The unti features integrated dust and chip collection with dust spigot to rear.
Tools are easily visible through the transparent shield. The spring-loaded shield is used to adjust the necessary pressure on the workpiece.
Optional equipment:
Curved moulding stop, slips on the arbor to allow precise depth of moulding adjustment. Optional guide wheels can also be used for safe accurate guiding.
Features:
Fully adjustable guard brushes;
Brake shoe integrated in the starting strip which may be
swung through 90 degrees from its working position into its inoperative
position and vice versa. In both positions it is automatically locked, and ensures stopping of the starting ring.
Maximum tool diameter 220mm
Aigner Bowmould master shaping guard is a patented modular system that allows fast and safe machining on curved work. It can be used for either left hand or right hand machining and comes with infinitely adjustable infeed guide, dust shields suitable for tool diameters up to 150mm and suitable for either hand or power feed use. The unti features integrated dust and chip collection with dust spigot to rear.
Tools are easily visible through the transparent shield. The spring-loaded shield is used to adjust the necessary pressure on the workpiece.
Optional equipment:
Curved moulding stop, slips on the arbor to allow precise depth of moulding adjustment. Optional guide wheels can also be used for safe accurate guiding.
Features:
Fully adjustable guard brushes;
Brake shoe integrated in the starting strip which may be
swung through 90 degrees from its working position into its inoperative
position and vice versa. In both positions it is automatically locked, and ensures stopping of the starting ring.
Maximum tool diameter 150mm
Aigner CirQuick is a handy help when sawing or milling circles meaning no tracing or reworking is necessary when processing exact bows or
discs. The unit can be installed on any bandsaw or milling machine running either clockwise or counter-clockwise.
Features:
Support strips for level compensation;
Guide plate with swivel mounting;
Compatability with Aigner table extensions
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 150mm capacity Bowmould Master.
It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate.
To suit shaft diameter 1 1/2"
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 150mm capacity Bowmould Master.
It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate.
To suit shaft diameter 30mm
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 150mm capacity Bowmould Master.
It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate.
To suit shaft diameter 35mm
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 150mm capacity Bowmould Master.
It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate.
To suit shaft diameter 40mm
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 150mm capacity Bowmould Master.
It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate.
To suit shaft diameter 50mm
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 220mm capacity Bowmould Master.
It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate.
To suit shaft diameter 1 1/2"
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 220mm capacity Bowmould Master.
It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate.
To suit shaft diameter 1 1/4"
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 220mm capacity Bowmould Master.
It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate.
To suit shaft diameter 30mm
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 220mm capacity Bowmould Master.
It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate.
To suit shaft diameter 35mm
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 220mm capacity Bowmould Master.
It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate.
To suit shaft diameter 40mm
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 220mm capacity Bowmould Master.
It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate.
To suit shaft diameter 50mm
Aigner Guide Set
Used in conjunction with the Aigner Segmenter for increased functionality
Consists of:
A. Infinitely adjustable plastic spacer rail
B. Securing pin
C. Metric scale for ease of setting
Aigner Segmenter
A necessary complementary tool to the CirQuick to enable the sawing of segments of a circle, for radii up to 1000mm
Can be used in conjunction with the Aigner Guide Set for increased functionality
This attachment for the KSM125 / KSM175 door lock mortiser machines gives you quick adjustment along the door. The device makes it easier to cut longer slots when mortising for door locks.
This side fence allows you to mortise freehand without the stand [ like the basic Mafell LS103] with 150 depth.
It is a useful optional attachment if you are mortising close into corners or working overhead.
This is an essential tool for timber framers either on site or workshop carpentry. It will speed up your timber frame joints whether you are marking miters or tenons - this clever angle / mitre guide has preset slots at 5mm increments to allow you to mark up the posts or beams more accurately and quickly.
Length: 300 mm
Scale Material : Spring steel with laser etching
Weight: 0.8 kg
CMT part no:CMT300
Dovetail joints give a touch of craftsmanship to your work, but many woodworkers avoid these joints, because of their apparent complexity. CMT's new 305mm (12") dovetail jig is the fast easy solution! Thanks to precise templates, permanent stops and easy adjustments, we have taken the "tinkering" out of the dovetail joinery. Simply clamp your workpiece in with the edges against the factory-set stops, set your bit depth and then you are ready to rout. Also, we haven't cut corners on quality either. This jig features steel body, templates, stops and clamping bars, so it produces perfect long-lasting joints for all your woodworking needs. The machine accepts stock from 11mm (7/16") to 25mm (1") thick, and is capable of producing a variety of joints with the available templates. Standard jig includes a template for 12,7mm (1/2") half blind joints and a template guide. Optional templates are available for through dovetail and box joints.
305mm (12") max length;
11mm (7/16") ~ 25mm (1") joint thickness.
STANDARD EQUIPMENT:
-standard ¥12,7mm (1/2") silver blind template: CMT300-T128
-¥15,8mmx4mm (5/8" x 5/32") template guide: 899.005.00
Some routers requires a universal base plate to fit the provided template guide. Please check the following optional accessories in the "SPARE PARTS" section:
CMT300-SB1 (S=¥8, ¥12mm);
CMT300-SB2 (S=¥6,35, ¥12,7mm).
CMT part no:CMT3000
CMT 3000 Ellipse & Circle Cutting Jig for Routers -
This product has been designed for cutting ellipses and circles with
any router types. You can make ellipses and circles for windows, doors and any other application.
By using two slides into the T-slot you can cut ellipses, whereas
if you use one slide, you can cut circles.
Ellipse and
circle cutting jig:
- Precise and rapid creation
- of ellipses and circles.
- Simple setup and effective
- operating.
- Clamping system for any type
- of routers.
- Special plastic cross frame with
- excellent sliding performance.
- Precisely machined T-slots
- and steel sliders.
- Zinc-coated metal parts to
- prevent rust.
- Delivered in a carton box along
- with instruction manual.
CMT part no:PGC-B2B
Lay two more straight edge clamps on the back of the other pair of straight edge clamps and secure them by using your back-to-back connectors.
Fasten the bottom jaw pads to the table top and clamp wood with the top jaw pads.
Thanks to the low profile jaws your work surface is never obstructed.
The back-to-back straight edge clamps can also be taken apart for making two
separate clamps.
CMT part no:CMT334-4595
The innovative CMT334 Universal Hinge Boring Head employs three spindles which allow you to bore the holes for all of the major hinge brands. The head can be utilized on boring and point to point machines.
Options to consider:
BORING BITS TO SUIT:
cm39335011 Dia. 35mm x 38.5mm (r-hand)
cm39308012 Dowel drill dia.8mm x 38.5mm (l-hand)
CMT part no:TMP-1200
The CMT flexible template is a guide strip for that can be curved and formed to use on spindle moulders & routers. It is easy to use - just screw it on to any kind of wooden panel, MDF or chipboard for creating you forms, arcs and curved elements. The flexible strip template is fixed plate with countersunk screws. The CMT flexible template is made of a highly-resistant flexible plastic, which can be tied in knots without any risk of ruining or reducing flexibility.
Screw your template to the edge of the panel and follow its shape and rout the border on the guide ring. The template is suitable for manual feed on routers, router tables and spindle moulders. Rout easily, safely and accurately to make multiple forms such as arcs, curved elements and cut-out forms. Mark the edge of your form precisely and screw it onto a previously-placed panel from underneath.
If you rout with a guide ring mounted onto your spindle moulder, keep your hands a safe distance behind the template. Two different profiles in three lengths are available. Please notice that the smallest profile features a short radius, whereas the larger profile features a larger opening in case of flat and long curves.
CMT part no:TMP-1000
The CMT flexible template is a guide strip for that can be curved and formed to use on spindle moulders & routers. It is easy to use - just screw it on to any kind of wooden panel, MDF or chipboard for creating you forms, arcs and curved elements. The flexible strip template is fixed plate with countersunk screws. The CMT flexible template is made of a highly-resistant flexible plastic, which can be tied in knots without any risk of ruining or reducing flexibility.
Screw your template to the edge of the panel and follow its shape and rout the border on the guide ring. The template is suitable for manual feed on routers, router tables and spindle moulders. Rout easily, safely and accurately to make multiple forms such as arcs, curved elements and cut-out forms. Mark the edge of your form precisely and screw it onto a previously-placed panel from underneath.
If you rout with a guide ring mounted onto your spindle moulder, keep your hands a safe distance behind the template. Two different profiles in three lengths are available. Please notice that the smallest profile features a short radius, whereas the larger profile features a larger opening in case of flat and long curves.
CMT part no:TMP-2000
The CMT flexible template is a guide strip for that can be curved and formed to use on spindle moulders & routers. It is easy to use - just screw it on to any kind of wooden panel, MDF or chipboard for creating you forms, arcs and curved elements. The flexible strip template is fixed plate with countersunk screws. The CMT flexible template is made of a highly-resistant flexible plastic, which can be tied in knots without any risk of ruining or reducing flexibility.
Screw your template to the edge of the panel and follow its shape and rout the border on the guide ring. The template is suitable for manual feed on routers, router tables and spindle moulders. Rout easily, safely and accurately to make multiple forms such as arcs, curved elements and cut-out forms. Mark the edge of your form precisely and screw it onto a previously-placed panel from underneath.
If you rout with a guide ring mounted onto your spindle moulder, keep your hands a safe distance behind the template. Two different profiles in three lengths are available. Please notice that the smallest profile features a short radius, whereas the larger profile features a larger opening in case of flat and long curves.
CMT part no:PGC-50
PROFESSIONAL STRAIGHT EDGE CLAMPS
PGC
Used as a fence for your bandsaw, drill press or even as an auxiliary fence on your router table or table saw, CMT's professional straight edge clamps represent a two-in-one tool, allowing you to either use them as an edge guide, or to easily clamp your boards or any object for woodworking. Available in different sizes.
HERE ARE THE MAIN FEATURES:
-Made of extruded aluminium for easy carriage and enhanced durability.
-Light, yet more rigid than any other clamps on the market.
-Measuring scales, low-profile jaws, built-in T-tracks on the top allowing the use of accessories or jigs.
-Either single or back-to-back clamps.
Low-profile clamps allow for accurate cuts, dados and grooves. In addition they properly work as an auxiliary fence on your drill press or router table. Sturdy jaws hold your workpiece to the full length of the clamp without any side-to-side play. Back-to-back clamps with the suitable accessories also let you manage your woodworking operations with a lot of versatility. Adjustable scale and two T-tracks allow you to use many accessories.
CMT part no:PGC-24
PROFESSIONAL STRAIGHT EDGE CLAMPS
PGC
Used as a fence for your bandsaw, drill press or even as an auxiliary fence on your router table or table saw, CMT's professional straight edge clamps represent a two-in-one tool, allowing you to either use them as an edge guide, or to easily clamp your boards or any object for woodworking. Available in different sizes.
HERE ARE THE MAIN FEATURES:
-Made of extruded aluminium for easy carriage and enhanced durability.
-Light, yet more rigid than any other clamps on the market.
-Measuring scales, low-profile jaws, built-in T-tracks on the top allowing the use of accessories or jigs.
-Either single or back-to-back clamps.
Low-profile clamps allow for accurate cuts, dados and grooves. In addition they properly work as an auxiliary fence on your drill press or router table. Sturdy jaws hold your workpiece to the full length of the clamp without any side-to-side play. Back-to-back clamps with the suitable accessories also let you manage your woodworking operations with a lot of versatility. Adjustable scale and two T-tracks allow you to use many accessories.
CMT part no:PGC-36
PROFESSIONAL STRAIGHT EDGE CLAMPS
PGC
Used as a fence for your bandsaw, drill press or even as an auxiliary fence on your router table or table saw, CMT's professional straight edge clamps represent a two-in-one tool, allowing you to either use them as an edge guide, or to easily clamp your boards or any object for woodworking. Available in different sizes.
HERE ARE THE MAIN FEATURES:
-Made of extruded aluminium for easy carriage and enhanced durability.
-Light, yet more rigid than any other clamps on the market.
-Measuring scales, low-profile jaws, built-in T-tracks on the top allowing the use of accessories or jigs.
-Either single or back-to-back clamps.
Low-profile clamps allow for accurate cuts, dados and grooves. In addition they properly work as an auxiliary fence on your drill press or router table. Sturdy jaws hold your workpiece to the full length of the clamp without any side-to-side play. Back-to-back clamps with the suitable accessories also let you manage your woodworking operations with a lot of versatility. Adjustable scale and two T-tracks allow you to use many accessories.
CMT part no:999.505.10
** Please note this part number is just the orange jig itself **
For fast, easy and accurate cabinet & furniture construction. Designed by CMT and professional cabinetmakers, this new system allows you to make rock-solid pocket hole joints in stock 12,7mm (1/2?) to 40mm (1-5/8?) thick with unprecedented speed and accuracy.
The heart of the Pocket-Pro? system is our unique moulded jig, which features hardened drill bushings and an interlocking two-piece design. Sliding the jig up or down enables you to adjust the stock thickness in preset 1,6mm (1/16?) increments without test joints or measurements! If you have used other pocket hole jigs you will be familiar with many joint applications, but you will benefit from many Pocket-Pro? system advantages.
For example:
-Some jigs require adding or removing various parts-of the jig to join different- stock thicknesses. With the Pocket-Pro? system you simply-have to adjust the interlocking jig up or-down for the full range of joints-12,7mm (1/2?) to 40mm (1-5/8?) thick.
-Other jigs require frequent repositioning-of the depth stop collar-for different joint-styles. CMT?s Pocket-Pro? joinery system-allows you to make most of the adjustments leaving the stop-collar in the same position of the drill bit.
-Plus, with CMT?s Pocket-Pro? system you can quickly adjust the location of the pocket in relation to the end of your workpiece to create a stronger joint by using longer screws, or to leave more ?meat? in the joint.
CMT part no:PPJ-002
For fast, easy and accurate cabinet & furniture construction. Designed by CMT and professional cabinetmakers, this new system allows you to make rock-solid pocket hole joints in stock 12,7mm (1/2") to 40mm (1-5/8") thick with unprecedented speed and accuracy.
The heart of the Pocket-ProT system is our unique moulded jig, which features hardened drill bushings and an interlocking two-piece design. Sliding the jig up or down enables you to adjust the stock thickness in preset 1,6mm (1/16") increments without test joints or measurements! If you have used other pocket hole jigs you will be familiar with many joint applications, but you will benefit from many Pocket-ProT system advantages.
For example:
-Some jigs require adding or removing various parts-of the jig to join different- stock thicknesses. With the Pocket-ProT system you simply-have to adjust the interlocking jig up or-down for the full range of joints-12,7mm (1/2") to 40mm (1-5/8") thick.
-Other jigs require frequent repositioning-of the depth stop collar-for different joint-styles. CMT's Pocket-ProT joinery system-allows you to make most of the adjustments leaving the stop-collar in the same position of the drill bit.
-Plus, with CMT's Pocket-ProT system you can quickly adjust the location of the pocket in relation to the end of your workpiece to create a stronger joint by using longer screws, or to leave more "meat" in the joint.
Check out the Pocket-ProT joinery system today. Easy enough for the beginner and accurate enough for the pro, the Pocket-ProT is the world's most versatile pocket hole jig
CMT part no:CMT650
Perfect joints on kitchen worktops from 420mm to 650mm width.
The CMT650 is designed to cut kitchen worktop joints with any type of router. Letter code system for different operations makes the jig work much easier and very quick.
JIG INCLUDES:
-1 x phenolic template;
-3 x zinc-coated steel location bush;
-1 x adjustable end stop;
-1 x instruction manual.
JIG REQUIRES:
-a portable router;
-a ¥30mm guide bush;
-a ¥12mm TCT straight bit;
-two clamps.
CMT650 IS DESIGNED FOR ¥12MM STRAIGHT BITS:
-template made of stable and hardened material;
-for 45 degrees and 90 degrees joints;
-integrated templates for rounding over and chamfering edges;
-extra location bush for the worktop width of 600mm;
-two integrated templates for panel bolt recesses;
-delivered with a clear and comprehensive instruction manual.
CMT part no:TMP-101 spare template for CMT System BTS-002 provides a fun and easy way for you to make divided bowls and trays in your shop. No lathe? No problem. This bowl making technique uses a router and CMT's unique bowl and tray router bit. The resulting bowls and trays are beautiful, and will leave your friends astonished! This kit also provides an excellent way to use up scrap wood. Glue pieces together, butcher block style, to make a beautiful pattern of colors and species
CMT part no:TMP-103 spare template for CMT System BTS-002 provides a fun and easy way for you to make divided bowls and trays in your shop. No lathe? No problem. This bowl making technique uses a router and CMT's unique bowl and tray router bit. The resulting bowls and trays are beautiful, and will leave your friends astonished! This kit also provides an excellent way to use up scrap wood. Glue pieces together, butcher block style, to make a beautiful pattern of colors and species
CMT part no:TMP-105
spare template for CMT System BTS-002 provides a fun and easy way for you to make divided bowls and trays in your shop. No lathe? No problem. This bowl making technique uses a router and CMT's unique bowl and tray router bit. The resulting bowls and trays are beautiful, and will leave your friends astonished! This kit also provides an excellent way to use up scrap wood. Glue pieces together, butcher block style, to make a beautiful pattern of colors and species
These high-quality, universal feather guides can be used horizontally or vertically, and either way around. They are the perfect safety accessory and improve the consistency of the process.
Included in the Package:
Main body of the feather board: 2 pcs
Handles: 4 pcs
Thickened washers: 2 pcs
Spacers: 4 pcs
Plastic T-slot sliders: 4 pcs
Self-locking screws: 6 pcs
T-slot screws: 6 pcs
Product Dimensions:
210mm x 120mm x 165mm
The feather board is suitable for all types of machines, including table saws, bandsaws, and flip engraving machines. The standard chute width is 19.3mm, and the small groove width is 14.2mm, accommodating a slider and self-locking T-screw.
Please see product info leaflet below for further info.
This side fence allows you to mortise freehand without the stand [ like the basic Mafell LS103] with 100 depth
It is a useful optional attachment if you are mortising close into corners or working overhead.
This side fence allows you to mortise freehand without the stand [ like the basic Mafell LS103] with 150 depth
It is a useful optional attachment if you are mortising close into corners or working overhead.
Trend C/CHISEL Corner Chisel
Allows a rounded recess in wood to be cut to a square recess with the use of a hammer.
Ideal for squaring hinge recesses in door frames and door edges, as well as lock faceplates.
Spring loaded high speed steel (HSS) anvil for a s
Length = 70 mm
Width = 29 mm
Weight = 100 g .
Trend CR/H150/SET Clamping force=150 kg
E=50 mm
A=160 mm
B=53 mm
Fixing hole spacing (length)=26.5 mm centre to centre
Fixing hole spacing (width)=25 mm centre to centre
Fixing hole width=8.5 mm
Bar throat height=23 mm
Max. th . Economy range clamp, ideal for securing workpiece either onto jigs or to the surface of the machine.
Trend CURV/8X1000 Width (excl. holes)=8.0
Inside radius min.=30 mm
Outside radius min.=35 mm
Material max. thickness=10.0
Fixing screws=2.5mm x 16mm Csk Pozi . A mini size flexible guide that is used to make a pattern, allows a shape to be cut repeatedly with precision.
Will produce round, segmental or elliptical arch shapes, curves and cutouts.
Use with a router and bearing guided cutter or
Aigner Cutter frame for smaller (150mm capacity) BowmouldMaster Used on the table of the machine as a support for workpieces when clamped onto the BowmouldMasterLead Time: 39 Days€97.13€116.56
Aigner Cutter frame for smaller (220mm capacity) BowmouldMaster Used on the table of the machine as a support for workpieces when clamped onto the BowmouldMasterLead Time: 39 Days€99.53€119.44
Aigner Bowmould master shaping guard is a patented modular system that allows fast and safe machining on curved work. It can be used for either left hand or right hand machining and comes with infinitely adjustable infeed guide, dust shields suitable for tool diameters up to 150mm and suitable for either hand or power feed use. The unti features integrated dust and chip collection with dust spigot to rear. Tools are easily visible through the transparent shield. The spring-loaded shield is used to adjust the necessary pressure on the workpiece. Optional equipment: Curved moulding stop, slips on the arbor to allow precise depth of moulding adjustment. Optional guide wheels can also be used for safe accurate guiding. Features: Fully adjustable guard brushes; Brake shoe integrated in the starting strip which may be swung through 90 degrees from its working position into its inoperative position and vice versa. In both positions it is automatically locked, and ensures stopping of the starting ring. Maximum tool diameter 220mmLead Time: 33 DaysList €1,243.30€956.93Inc Vat €1,148.32
Aigner Bowmould master shaping guard is a patented modular system that allows fast and safe machining on curved work. It can be used for either left hand or right hand machining and comes with infinitely adjustable infeed guide, dust shields suitable for tool diameters up to 150mm and suitable for either hand or power feed use. The unti features integrated dust and chip collection with dust spigot to rear. Tools are easily visible through the transparent shield. The spring-loaded shield is used to adjust the necessary pressure on the workpiece. Optional equipment: Curved moulding stop, slips on the arbor to allow precise depth of moulding adjustment. Optional guide wheels can also be used for safe accurate guiding. Features: Fully adjustable guard brushes; Brake shoe integrated in the starting strip which may be swung through 90 degrees from its working position into its inoperative position and vice versa. In both positions it is automatically locked, and ensures stopping of the starting ring. Maximum tool diameter 150mmLead Time: 39 Days€944.94€1,133.93
Aigner CirQuick is a handy help when sawing or milling circles meaning no tracing or reworking is necessary when processing exact bows or discs. The unit can be installed on any bandsaw or milling machine running either clockwise or counter-clockwise. Features: Support strips for level compensation; Guide plate with swivel mounting; Compatability with Aigner table extensionsIn StockList €169.80€125.91Inc Vat €151.09
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 150mm capacity Bowmould Master. It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate. To suit shaft diameter 1 1/2"Lead Time: 39 Days€345.36€414.43
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 150mm capacity Bowmould Master. It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate. To suit shaft diameter 30mmLead Time: 39 Days€332.17€398.60
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 150mm capacity Bowmould Master. It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate. To suit shaft diameter 35mmLead Time: 39 Days€287.80€345.36
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 150mm capacity Bowmould Master. It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate. To suit shaft diameter 40mmIn Stock€296.19€355.43
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 150mm capacity Bowmould Master. It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate. To suit shaft diameter 50mmLead Time: 39 Days€322.58€387.10
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 220mm capacity Bowmould Master. It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate. To suit shaft diameter 1 1/2"Lead Time: 39 Days€393.33€472.00
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 220mm capacity Bowmould Master. It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate. To suit shaft diameter 1 1/4"In Stock€393.33€472.00
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 220mm capacity Bowmould Master. It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate. To suit shaft diameter 30mmLead Time: 39 Days€298.59€358.31
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 220mm capacity Bowmould Master. It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate. To suit shaft diameter 35mmLead Time: 39 Days€309.38€371.26
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 220mm capacity Bowmould Master. It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate. To suit shaft diameter 40mmLead Time: 39 Days€316.58€379.90
The Aigner Counterstop machining guide is essential when machining curved components in conjunction with the 220mm capacity Bowmould Master. It provides for infinite adjustment of the depth of machining within the cutting circle of the tool in use. The curved machining guide is mounted on the spindle, the height adjustment being made simultaneously with the cutter head. The curved machining guide adjustment for machining depth is easily calibrated on a scale marked on the plate. To suit shaft diameter 50mmLead Time: 39 Days€369.34€443.21
Aigner Guide Set Used in conjunction with the Aigner Segmenter for increased functionality Consists of: A. Infinitely adjustable plastic spacer rail B. Securing pin C. Metric scale for ease of settingLead Time: 39 Days€191.87€230.24
Aigner Segmenter A necessary complementary tool to the CirQuick to enable the sawing of segments of a circle, for radii up to 1000mm Can be used in conjunction with the Aigner Guide Set for increased functionalityLead Time: 39 Days€249.43€299.32
This side fence allows you to mortise freehand without the stand [ like the basic Mafell LS103] with 150 depth. It is a useful optional attachment if you are mortising close into corners or working overhead.Lead Time: 34 Days€191.87€230.24
This is an essential tool for timber framers either on site or workshop carpentry. It will speed up your timber frame joints whether you are marking miters or tenons - this clever angle / mitre guide has preset slots at 5mm increments to allow you to mark up the posts or beams more accurately and quickly. Length: 300 mm Scale Material : Spring steel with laser etching Weight: 0.8 kgLead Time: 34 DaysList €273.41€173.88Inc Vat €208.66
CMT part no:CMT300 Dovetail joints give a touch of craftsmanship to your work, but many woodworkers avoid these joints, because of their apparent complexity. CMT's new 305mm (12") dovetail jig is the fast easy solution! Thanks to precise templates, permanent stops and easy adjustments, we have taken the "tinkering" out of the dovetail joinery. Simply clamp your workpiece in with the edges against the factory-set stops, set your bit depth and then you are ready to rout. Also, we haven't cut corners on quality either. This jig features steel body, templates, stops and clamping bars, so it produces perfect long-lasting joints for all your woodworking needs. The machine accepts stock from 11mm (7/16") to 25mm (1") thick, and is capable of producing a variety of joints with the available templates. Standard jig includes a template for 12,7mm (1/2") half blind joints and a template guide. Optional templates are available for through dovetail and box joints. 305mm (12") max length; 11mm (7/16") ~ 25mm (1") joint thickness. STANDARD EQUIPMENT: -standard ¥12,7mm (1/2") silver blind template: CMT300-T128 -¥15,8mmx4mm (5/8" x 5/32") template guide: 899.005.00 Some routers requires a universal base plate to fit the provided template guide. Please check the following optional accessories in the "SPARE PARTS" section: CMT300-SB1 (S=¥8, ¥12mm); CMT300-SB2 (S=¥6,35, ¥12,7mm).In StockList €297.88€205.06Inc Vat €246.07
CMT part no:CMT3000 CMT 3000 Ellipse & Circle Cutting Jig for Routers - This product has been designed for cutting ellipses and circles with any router types. You can make ellipses and circles for windows, doors and any other application. By using two slides into the T-slot you can cut ellipses, whereas if you use one slide, you can cut circles. Ellipse and circle cutting jig: - Precise and rapid creation - of ellipses and circles. - Simple setup and effective - operating. - Clamping system for any type - of routers. - Special plastic cross frame with - excellent sliding performance. - Precisely machined T-slots - and steel sliders. - Zinc-coated metal parts to - prevent rust. - Delivered in a carton box along - with instruction manual.In StockList €497.89€225.44Inc Vat €270.53
CMT part no:PGC-B2B Lay two more straight edge clamps on the back of the other pair of straight edge clamps and secure them by using your back-to-back connectors. Fasten the bottom jaw pads to the table top and clamp wood with the top jaw pads. Thanks to the low profile jaws your work surface is never obstructed. The back-to-back straight edge clamps can also be taken apart for making two separate clamps.In StockList €34.54€23.98Inc Vat €28.78
CMT part no:CMT334-4595 The innovative CMT334 Universal Hinge Boring Head employs three spindles which allow you to bore the holes for all of the major hinge brands. The head can be utilized on boring and point to point machines. Options to consider: BORING BITS TO SUIT: cm39335011 Dia. 35mm x 38.5mm (r-hand) cm39308012 Dowel drill dia.8mm x 38.5mm (l-hand)Lead Time: 14 DaysList €538.19€368.14Inc Vat €441.77
CMT part no:TMP-1200 The CMT flexible template is a guide strip for that can be curved and formed to use on spindle moulders & routers. It is easy to use - just screw it on to any kind of wooden panel, MDF or chipboard for creating you forms, arcs and curved elements. The flexible strip template is fixed plate with countersunk screws. The CMT flexible template is made of a highly-resistant flexible plastic, which can be tied in knots without any risk of ruining or reducing flexibility. Screw your template to the edge of the panel and follow its shape and rout the border on the guide ring. The template is suitable for manual feed on routers, router tables and spindle moulders. Rout easily, safely and accurately to make multiple forms such as arcs, curved elements and cut-out forms. Mark the edge of your form precisely and screw it onto a previously-placed panel from underneath. If you rout with a guide ring mounted onto your spindle moulder, keep your hands a safe distance behind the template. Two different profiles in three lengths are available. Please notice that the smallest profile features a short radius, whereas the larger profile features a larger opening in case of flat and long curves.In StockList €116.56€79.14Inc Vat €94.97
CMT part no:TMP-1000 The CMT flexible template is a guide strip for that can be curved and formed to use on spindle moulders & routers. It is easy to use - just screw it on to any kind of wooden panel, MDF or chipboard for creating you forms, arcs and curved elements. The flexible strip template is fixed plate with countersunk screws. The CMT flexible template is made of a highly-resistant flexible plastic, which can be tied in knots without any risk of ruining or reducing flexibility. Screw your template to the edge of the panel and follow its shape and rout the border on the guide ring. The template is suitable for manual feed on routers, router tables and spindle moulders. Rout easily, safely and accurately to make multiple forms such as arcs, curved elements and cut-out forms. Mark the edge of your form precisely and screw it onto a previously-placed panel from underneath. If you rout with a guide ring mounted onto your spindle moulder, keep your hands a safe distance behind the template. Two different profiles in three lengths are available. Please notice that the smallest profile features a short radius, whereas the larger profile features a larger opening in case of flat and long curves.In StockList €155.41€112.72Inc Vat €135.26
CMT part no:TMP-2000 The CMT flexible template is a guide strip for that can be curved and formed to use on spindle moulders & routers. It is easy to use - just screw it on to any kind of wooden panel, MDF or chipboard for creating you forms, arcs and curved elements. The flexible strip template is fixed plate with countersunk screws. The CMT flexible template is made of a highly-resistant flexible plastic, which can be tied in knots without any risk of ruining or reducing flexibility. Screw your template to the edge of the panel and follow its shape and rout the border on the guide ring. The template is suitable for manual feed on routers, router tables and spindle moulders. Rout easily, safely and accurately to make multiple forms such as arcs, curved elements and cut-out forms. Mark the edge of your form precisely and screw it onto a previously-placed panel from underneath. If you rout with a guide ring mounted onto your spindle moulder, keep your hands a safe distance behind the template. Two different profiles in three lengths are available. Please notice that the smallest profile features a short radius, whereas the larger profile features a larger opening in case of flat and long curves.In StockList €310.82€206.26Inc Vat €247.51
CMT part no:PGC-50 PROFESSIONAL STRAIGHT EDGE CLAMPS PGC Used as a fence for your bandsaw, drill press or even as an auxiliary fence on your router table or table saw, CMT's professional straight edge clamps represent a two-in-one tool, allowing you to either use them as an edge guide, or to easily clamp your boards or any object for woodworking. Available in different sizes. HERE ARE THE MAIN FEATURES: -Made of extruded aluminium for easy carriage and enhanced durability. -Light, yet more rigid than any other clamps on the market. -Measuring scales, low-profile jaws, built-in T-tracks on the top allowing the use of accessories or jigs. -Either single or back-to-back clamps. Low-profile clamps allow for accurate cuts, dados and grooves. In addition they properly work as an auxiliary fence on your drill press or router table. Sturdy jaws hold your workpiece to the full length of the clamp without any side-to-side play. Back-to-back clamps with the suitable accessories also let you manage your woodworking operations with a lot of versatility. Adjustable scale and two T-tracks allow you to use many accessories.In StockList €92.10€68.35Inc Vat €82.02
CMT part no:PGC-24 PROFESSIONAL STRAIGHT EDGE CLAMPS PGC Used as a fence for your bandsaw, drill press or even as an auxiliary fence on your router table or table saw, CMT's professional straight edge clamps represent a two-in-one tool, allowing you to either use them as an edge guide, or to easily clamp your boards or any object for woodworking. Available in different sizes. HERE ARE THE MAIN FEATURES: -Made of extruded aluminium for easy carriage and enhanced durability. -Light, yet more rigid than any other clamps on the market. -Measuring scales, low-profile jaws, built-in T-tracks on the top allowing the use of accessories or jigs. -Either single or back-to-back clamps. Low-profile clamps allow for accurate cuts, dados and grooves. In addition they properly work as an auxiliary fence on your drill press or router table. Sturdy jaws hold your workpiece to the full length of the clamp without any side-to-side play. Back-to-back clamps with the suitable accessories also let you manage your woodworking operations with a lot of versatility. Adjustable scale and two T-tracks allow you to use many accessories.Lead Time: 12 DaysList €64.75€47.97Inc Vat €57.56
CMT part no:PGC-36 PROFESSIONAL STRAIGHT EDGE CLAMPS PGC Used as a fence for your bandsaw, drill press or even as an auxiliary fence on your router table or table saw, CMT's professional straight edge clamps represent a two-in-one tool, allowing you to either use them as an edge guide, or to easily clamp your boards or any object for woodworking. Available in different sizes. HERE ARE THE MAIN FEATURES: -Made of extruded aluminium for easy carriage and enhanced durability. -Light, yet more rigid than any other clamps on the market. -Measuring scales, low-profile jaws, built-in T-tracks on the top allowing the use of accessories or jigs. -Either single or back-to-back clamps. Low-profile clamps allow for accurate cuts, dados and grooves. In addition they properly work as an auxiliary fence on your drill press or router table. Sturdy jaws hold your workpiece to the full length of the clamp without any side-to-side play. Back-to-back clamps with the suitable accessories also let you manage your woodworking operations with a lot of versatility. Adjustable scale and two T-tracks allow you to use many accessories.Lead Time: 12 DaysList €80.58€59.96Inc Vat €71.95
CMT part no:999.505.10 ** Please note this part number is just the orange jig itself ** For fast, easy and accurate cabinet & furniture construction. Designed by CMT and professional cabinetmakers, this new system allows you to make rock-solid pocket hole joints in stock 12,7mm (1/2?) to 40mm (1-5/8?) thick with unprecedented speed and accuracy. The heart of the Pocket-Pro? system is our unique moulded jig, which features hardened drill bushings and an interlocking two-piece design. Sliding the jig up or down enables you to adjust the stock thickness in preset 1,6mm (1/16?) increments without test joints or measurements! If you have used other pocket hole jigs you will be familiar with many joint applications, but you will benefit from many Pocket-Pro? system advantages. For example: -Some jigs require adding or removing various parts-of the jig to join different- stock thicknesses. With the Pocket-Pro? system you simply-have to adjust the interlocking jig up or-down for the full range of joints-12,7mm (1/2?) to 40mm (1-5/8?) thick. -Other jigs require frequent repositioning-of the depth stop collar-for different joint-styles. CMT?s Pocket-Pro? joinery system-allows you to make most of the adjustments leaving the stop-collar in the same position of the drill bit. -Plus, with CMT?s Pocket-Pro? system you can quickly adjust the location of the pocket in relation to the end of your workpiece to create a stronger joint by using longer screws, or to leave more ?meat? in the joint.In Stock
CMT part no:PPJ-002 For fast, easy and accurate cabinet & furniture construction. Designed by CMT and professional cabinetmakers, this new system allows you to make rock-solid pocket hole joints in stock 12,7mm (1/2") to 40mm (1-5/8") thick with unprecedented speed and accuracy. The heart of the Pocket-ProT system is our unique moulded jig, which features hardened drill bushings and an interlocking two-piece design. Sliding the jig up or down enables you to adjust the stock thickness in preset 1,6mm (1/16") increments without test joints or measurements! If you have used other pocket hole jigs you will be familiar with many joint applications, but you will benefit from many Pocket-ProT system advantages. For example: -Some jigs require adding or removing various parts-of the jig to join different- stock thicknesses. With the Pocket-ProT system you simply-have to adjust the interlocking jig up or-down for the full range of joints-12,7mm (1/2") to 40mm (1-5/8") thick. -Other jigs require frequent repositioning-of the depth stop collar-for different joint-styles. CMT's Pocket-ProT joinery system-allows you to make most of the adjustments leaving the stop-collar in the same position of the drill bit. -Plus, with CMT's Pocket-ProT system you can quickly adjust the location of the pocket in relation to the end of your workpiece to create a stronger joint by using longer screws, or to leave more "meat" in the joint. Check out the Pocket-ProT joinery system today. Easy enough for the beginner and accurate enough for the pro, the Pocket-ProT is the world's most versatile pocket hole jigIn StockList €142.46€98.33Inc Vat €118.00
CMT part no:CMT650 Perfect joints on kitchen worktops from 420mm to 650mm width. The CMT650 is designed to cut kitchen worktop joints with any type of router. Letter code system for different operations makes the jig work much easier and very quick. JIG INCLUDES: -1 x phenolic template; -3 x zinc-coated steel location bush; -1 x adjustable end stop; -1 x instruction manual. JIG REQUIRES: -a portable router; -a ¥30mm guide bush; -a ¥12mm TCT straight bit; -two clamps. CMT650 IS DESIGNED FOR ¥12MM STRAIGHT BITS: -template made of stable and hardened material; -for 45 degrees and 90 degrees joints; -integrated templates for rounding over and chamfering edges; -extra location bush for the worktop width of 600mm; -two integrated templates for panel bolt recesses; -delivered with a clear and comprehensive instruction manual.Lead Time: 14 DaysList €292.12€189.47Inc Vat €227.36
CMT part no:TMP-101 spare template for CMT System BTS-002 provides a fun and easy way for you to make divided bowls and trays in your shop. No lathe? No problem. This bowl making technique uses a router and CMT's unique bowl and tray router bit. The resulting bowls and trays are beautiful, and will leave your friends astonished! This kit also provides an excellent way to use up scrap wood. Glue pieces together, butcher block style, to make a beautiful pattern of colors and speciesLead Time: 12 DaysList €38.86€28.78Inc Vat €34.54
CMT part no:TMP-103 spare template for CMT System BTS-002 provides a fun and easy way for you to make divided bowls and trays in your shop. No lathe? No problem. This bowl making technique uses a router and CMT's unique bowl and tray router bit. The resulting bowls and trays are beautiful, and will leave your friends astonished! This kit also provides an excellent way to use up scrap wood. Glue pieces together, butcher block style, to make a beautiful pattern of colors and speciesLead Time: 12 DaysList €38.86€28.78Inc Vat €34.54
CMT part no:TMP-105 spare template for CMT System BTS-002 provides a fun and easy way for you to make divided bowls and trays in your shop. No lathe? No problem. This bowl making technique uses a router and CMT's unique bowl and tray router bit. The resulting bowls and trays are beautiful, and will leave your friends astonished! This kit also provides an excellent way to use up scrap wood. Glue pieces together, butcher block style, to make a beautiful pattern of colors and speciesLead Time: 12 DaysList €38.86€28.78Inc Vat €34.54
These high-quality, universal feather guides can be used horizontally or vertically, and either way around. They are the perfect safety accessory and improve the consistency of the process. Included in the Package: Main body of the feather board: 2 pcs Handles: 4 pcs Thickened washers: 2 pcs Spacers: 4 pcs Plastic T-slot sliders: 4 pcs Self-locking screws: 6 pcs T-slot screws: 6 pcs Product Dimensions: 210mm x 120mm x 165mm The feather board is suitable for all types of machines, including table saws, bandsaws, and flip engraving machines. The standard chute width is 19.3mm, and the small groove width is 14.2mm, accommodating a slider and self-locking T-screw. Please see product info leaflet below for further info.In StockList €31.66€17.99Inc Vat €21.59
This side fence allows you to mortise freehand without the stand [ like the basic Mafell LS103] with 100 depth It is a useful optional attachment if you are mortising close into corners or working overhead.Lead Time: 34 Days€191.87€230.24
This side fence allows you to mortise freehand without the stand [ like the basic Mafell LS103] with 150 depth It is a useful optional attachment if you are mortising close into corners or working overhead.Lead Time: 34 Days€191.87€230.24
Trend C/CHISEL Corner Chisel Allows a rounded recess in wood to be cut to a square recess with the use of a hammer. Ideal for squaring hinge recesses in door frames and door edges, as well as lock faceplates. Spring loaded high speed steel (HSS) anvil for a s Length = 70 mm Width = 29 mm Weight = 100 g .Lead Time: 5 Days€25.18€30.22As low as €27.19
Trend CR/H150/SET Clamping force=150 kg E=50 mm A=160 mm B=53 mm Fixing hole spacing (length)=26.5 mm centre to centre Fixing hole spacing (width)=25 mm centre to centre Fixing hole width=8.5 mm Bar throat height=23 mm Max. th . Economy range clamp, ideal for securing workpiece either onto jigs or to the surface of the machine.Lead Time: 5 Days€41.97€50.36As low as €45.32
Trend CURV/8X1000 Width (excl. holes)=8.0 Inside radius min.=30 mm Outside radius min.=35 mm Material max. thickness=10.0 Fixing screws=2.5mm x 16mm Csk Pozi . A mini size flexible guide that is used to make a pattern, allows a shape to be cut repeatedly with precision. Will produce round, segmental or elliptical arch shapes, curves and cutouts. Use with a router and bearing guided cutter orLead Time: 5 Days€105.53€126.64As low as €113.96
