Flexible Extraction Hose
(32 Products)
High-performance Flexible Dust Extraction hose, suitable for a variety of dust extractors or air purifiers. Save £££ with our Premium PU S1 Hose long-lasting proven woodworking dust extraction hose, perfect for planers, sanders, saws and CNC Routers, at unbeatable prices.
-
Airhose 200 mm (8") L= 5.00 mtr MAXVAC Airhose Ducting is made from ultra tough and endurable material and can be attached to the front or rear of most of the MAXVAC Dustblocker, MEDI & Air Movement Fan ranges to enable ducting the to or away from the machine. This is great for creating positive or negative pressure areas or simply to channel air extraction along a specific route to or away from the machine. The MAXVAC Airhose flexible ducting hose can be used in many industrial air movement applications. These lightweight hoses are made from PVC vinyl coated polyester fabric and has been reinforced with a spring steel wire helix for added strength when flexed. Each section of orange flex duct is constructed with a protective external wear-strip. The protective wear-strip provides an added layer of protection from dragging and scraping the hose material on the ground. Heat resistant up to 100 degreesC Also available in other sizes, call us if your size isn't listed or you require a custom size. Diameter Length 200 mm (8") 5 mtr 250 mm (10") 5 mtr 300 mm (12") 5 mtr 400 mm (16") 5 mtr 500 mm (20") 5 mtr 600 mm (24") 5 mtrLead Time: 15 Days -
Airhose 250 mm (10") L= 5.00 mtr MAXVAC Airhose Ducting is made from ultra tough and endurable material and can be attached to the front or rear of most of the MAXVAC Dustblocker, MEDI & Air Movement Fan ranges to enable ducting the to or away from the machine. This is great for creating positive or negative pressure areas or simply to channel air extraction along a specific route to or away from the machine. The MAXVAC Airhose flexible ducting hose can be used in many industrial air movement applications. These lightweight hoses are made from PVC vinyl coated polyester fabric and has been reinforced with a spring steel wire helix for added strength when flexed. Each section of orange flex duct is constructed with a protective external wear-strip. The protective wear-strip provides an added layer of protection from dragging and scraping the hose material on the ground. Heat resistant up to 100 degreesC Also available in other sizes, call us if your size isn't listed or you require a custom size. Diameter Length 200 mm (8") 5 mtr 250 mm (10") 5 mtr 300 mm (12") 5 mtr 400 mm (16") 5 mtr 500 mm (20") 5 mtr 600 mm (24") 5 mtrLead Time: 15 Days -
Airhose 300 mm (12") L= 5.00 mtr MAXVAC Airhose Ducting is made from ultra tough and endurable material and can be attached to the front or rear of most of the MAXVAC Dustblocker, MEDI & Air Movement Fan ranges to enable ducting the to or away from the machine. This is great for creating positive or negative pressure areas or simply to channel air extraction along a specific route to or away from the machine. The MAXVAC Airhose flexible ducting hose can be used in many industrial air movement applications. These lightweight hoses are made from PVC vinyl coated polyester fabric and has been reinforced with a spring steel wire helix for added strength when flexed. Each section of orange flex duct is constructed with a protective external wear-strip. The protective wear-strip provides an added layer of protection from dragging and scraping the hose material on the ground. Heat resistant up to 100 degreesC Also available in other sizes, call us if your size isn't listed or you require a custom size. Diameter Length 200 mm (8") 5 mtr 250 mm (10") 5 mtr 300 mm (12") 5 mtr 400 mm (16") 5 mtr 500 mm (20") 5 mtr 600 mm (24") 5 mtrLead Time: 15 Days -
Airhose 400 mm (16") L= 5.00 mtr MAXVAC Airhose Ducting is made from ultra tough and endurable material and can be attached to the front or rear of most of the MAXVAC Dustblocker, MEDI & Air Movement Fan ranges to enable ducting the to or away from the machine. This is great for creating positive or negative pressure areas or simply to channel air extraction along a specific route to or away from the machine. The MAXVAC Airhose flexible ducting hose can be used in many industrial air movement applications. These lightweight hoses are made from PVC vinyl coated polyester fabric and has been reinforced with a spring steel wire helix for added strength when flexed. Each section of orange flex duct is constructed with a protective external wear-strip. The protective wear-strip provides an added layer of protection from dragging and scraping the hose material on the ground. Heat resistant up to 100 degreesC Also available in other sizes, call us if your size isn't listed or you require a custom size. Diameter Length 200 mm (8") 5 mtr 250 mm (10") 5 mtr 300 mm (12") 5 mtr 400 mm (16") 5 mtr 500 mm (20") 5 mtr 600 mm (24") 5 mtrLead Time: 15 Days -
Airhose 500 mm (20") L= 5.00 mtr MAXVAC Airhose Ducting is made from ultra tough and endurable material and can be attached to the front or rear of most of the MAXVAC Dustblocker, MEDI & Air Movement Fan ranges to enable ducting the to or away from the machine. This is great for creating positive or negative pressure areas or simply to channel air extraction along a specific route to or away from the machine. The MAXVAC Airhose flexible ducting hose can be used in many industrial air movement applications. These lightweight hoses are made from PVC vinyl coated polyester fabric and has been reinforced with a spring steel wire helix for added strength when flexed. Each section of orange flex duct is constructed with a protective external wear-strip. The protective wear-strip provides an added layer of protection from dragging and scraping the hose material on the ground. Heat resistant up to 100 degreesC Also available in other sizes, call us if your size isn't listed or you require a custom size. Diameter Length 200 mm (8") 5 mtr 250 mm (10") 5 mtr 300 mm (12") 5 mtr 400 mm (16") 5 mtr 500 mm (20") 5 mtr 600 mm (24") 5 mtrLead Time: 15 Days -
Airhose 600 mm (24") L= 5.00 mtr MAXVAC Airhose Ducting is made from ultra tough and endurable material and can be attached to the front or rear of most of the MAXVAC Dustblocker, MEDI & Air Movement Fan ranges to enable ducting the to or away from the machine. This is great for creating positive or negative pressure areas or simply to channel air extraction along a specific route to or away from the machine. The MAXVAC Airhose flexible ducting hose can be used in many industrial air movement applications. These lightweight hoses are made from PVC vinyl coated polyester fabric and has been reinforced with a spring steel wire helix for added strength when flexed. Each section of orange flex duct is constructed with a protective external wear-strip. The protective wear-strip provides an added layer of protection from dragging and scraping the hose material on the ground. Heat resistant up to 100 degreesC Also available in other sizes, call us if your size isn't listed or you require a custom size. Diameter Length 200 mm (8") 5 mtr 250 mm (10") 5 mtr 300 mm (12") 5 mtr 400 mm (16") 5 mtr 500 mm (20") 5 mtr 600 mm (24") 5 mtrLead Time: 15 Days -
10mtr length of PU 102mm diameter flexible hose for Woodworking industry, cnc router, dust extraction, vapours, small industrial cleaning and suction plants Technical Features: Ester based Polyurethane duct reinforced with a steel spiral copper coated. Constant wall thickness of 0,40mm. Properties: Very light and flexible, axially compressible (about 5:1) for easy handling and costs saving in stocking and transporting. The PU-coated spiral allows more bending sessions, thus the duct has good mechanical properties and it is especially suitable for dynamic applications.Resistant to abrasion. Halogens free conform to RoHS and phthalates free. Standards: It can be made electrically bonded by earthing the steel spiral. (For further info regarding Electrical Resistance: The electrical resistance R 102 Ohm/m is according to ISO 8031 - ATEX Directive 94/4/EC and 99/92/EC). REACH Regulation (1907/2006) Temperature Range: -40 degreesC+90 degreesC (+125 degreesC short time)In Stock -
6m length of PU 102mm diameter flexible hose for Woodworking industry, dust extraction, vapours, small industrial cleaning and suction plants Technical Features: Ester based Polyurethane duct reinforced with a steel spiral copper coated. Constant wall thickness of 0,40mm. Properties: Very light and flexible, axially compressible (about 5:1) for easy handling and costs saving in stocking and transporting. The PU-coated spiral allows more bending sessions, thus the duct has good mechanical properties and it is especially suitable for dynamic applications.Resistant to abrasion. Halogens free conform to RoHS and phthalates free. Standards: It can be made electrically bonded by earthing the steel spiral. (For further info regarding Electrical Resistance: The electrical resistance R 102 Ohm/m is according to ISO 8031 - ATEX Directive 94/4/EC and 99/92/EC). REACH Regulation (1907/2006) Temperature Range: -40 degreesC+90 degreesC (+125 degreesC short time) Application: Woodworking industry, dust extraction, vapours, small industrial cleaning and suction plantsIn Stock -
10mtr length of PU 127mm diameter flexible hose for Woodworking industry, cnc router, dust extraction, vapours, small industrial cleaning and suction plants Technical Features: Ester based Polyurethane duct reinforced with a steel spiral copper coated. Constant wall thickness of 0,40mm. Properties: Very light and flexible, axially compressible (about 5:1) for easy handling and costs saving in stocking and transporting. The PU-coated spiral allows more bending sessions, thus the duct has good mechanical properties and it is especially suitable for dynamic applications.Resistant to abrasion. Halogens free conform to RoHS and phthalates free. Standards: It can be made electrically bonded by earthing the steel spiral. (For further info regarding Electrical Resistance: The electrical resistance R 102 Ohm/m is according to ISO 8031 - ATEX Directive 94/4/EC and 99/92/EC). REACH Regulation (1907/2006) Temperature Range: -40 degreesC+90 degreesC (+125 degreesC short time)In Stock -
6m length of PU 125 mm diameter flexible hose for Woodworking industry, dust extraction, vapours, small industrial cleaning and suction plants Technical Features: Ester based Polyurethane duct reinforced with a steel spiral copper coated. Constant wall thickness of 0,40mm. Properties: Very light and flexible, axially compressible (about 5:1) for easy handling and costs saving in stocking and transporting. The PU-coated spiral allows more bending sessions, thus the duct has good mechanical properties and it is especially suitable for dynamic applications.Resistant to abrasion. Halogens free conform to RoHS and phthalates free. Standards: It can be made electrically bonded by earthing the steel spiral. (For further info regarding Electrical Resistance: The electrical resistance R 102 Ohm/m is according to ISO 8031 - ATEX Directive 94/4/EC and 99/92/EC). REACH Regulation (1907/2006) Temperature Range: -40 degreesC+90 degreesC (+125 degreesC short time)In Stock -
10mtr length of PU 152mm diameter flexible hose for Woodworking industry, cnc router, dust extraction, vapours, small industrial cleaning and suction plants Technical Features: Ester based Polyurethane duct reinforced with a steel spiral copper coated. Constant wall thickness of 0,40mm. Properties: Very light and flexible, axially compressible (about 5:1) for easy handling and costs saving in stocking and transporting. The PU-coated spiral allows more bending sessions, thus the duct has good mechanical properties and it is especially suitable for dynamic applications.Resistant to abrasion. Halogens free conform to RoHS and phthalates free. Standards: It can be made electrically bonded by earthing the steel spiral. (For further info regarding Electrical Resistance: The electrical resistance R 102 Ohm/m is according to ISO 8031 - ATEX Directive 94/4/EC and 99/92/EC). REACH Regulation (1907/2006) Temperature Range: -40 degreesC+90 degreesC (+125 degreesC short time)In Stock -
20m roll pvc high quality flexible hose 150mm diameterLead Time: 25 Days -
6.0m length of PU 152 mm diameter flexible hose for Woodworking industry, dust extraction, vapours, small industrial cleaning and suction plants Technical Features: Ester based Polyurethane duct reinforced with a steel spiral copper coated. Constant wall thickness of 0,40mm. Properties: Very light and flexible, axially compressible (about 5:1) for easy handling and costs saving in stocking and transporting. The PU-coated spiral allows more bending sessions, thus the duct has good mechanical properties and it is especially suitable for dynamic applications.Resistant to abrasion. Halogens free conform to RoHS and phthalates free. Standards: It can be made electrically bonded by earthing the steel spiral. (For further info regarding Electrical Resistance: The electrical resistance R 102 Ohm/m is according to ISO 8031 - ATEX Directive 94/4/EC and 99/92/EC). REACH Regulation (1907/2006) Temperature Range: -40 degreesC+90 degreesC (+125 degreesC short time)In Stock -
6.0m length of PU 180 mm diameter flexible hose for Woodworking industry, dust extraction, vapours, small industrial cleaning and suction plants Technical Features: Ester based Polyurethane duct reinforced with a steel spiral copper coated. Constant wall thickness of 0,40mm. Properties: Very light and flexible, axially compressible (about 5:1) for easy handling and costs saving in stocking and transporting. The PU-coated spiral allows more bending sessions, thus the duct has good mechanical properties and it is especially suitable for dynamic applications.Resistant to abrasion. Halogens free conform to RoHS and phthalates free. Standards: It can be made electrically bonded by earthing the steel spiral. (For further info regarding Electrical Resistance: The electrical resistance R 102 Ohm/m is according to ISO 8031 - ATEX Directive 94/4/EC and 99/92/EC). REACH Regulation (1907/2006) Temperature Range: -40 degreesC+90 degreesC (+125 degreesC short time)In Stock -
10mtr length of PU 203 mm diameter flexible hose for Woodworking industry, cnc router, dust extraction, vapours, small industrial cleaning and suction plants Technical Features: Ester based Polyurethane duct reinforced with a steel spiral copper coated. Constant wall thickness of 0,40mm. Properties: Very light and flexible, axially compressible (about 5:1) for easy handling and costs saving in stocking and transporting. The PU-coated spiral allows more bending sessions, thus the duct has good mechanical properties and it is especially suitable for dynamic applications.Resistant to abrasion. Halogens free conform to RoHS and phthalates free. Standards: It can be made electrically bonded by earthing the steel spiral. (For further info regarding Electrical Resistance: The electrical resistance R 102 Ohm/m is according to ISO 8031 - ATEX Directive 94/4/EC and 99/92/EC). REACH Regulation (1907/2006) Temperature Range: -40 degreesC+90 degreesC (+125 degreesC short time)In Stock
-
6.0m length of PU 203 mm diameter flexible hose for Woodworking industry, dust extraction, vapours, small industrial cleaning and suction plants Technical Features: Ester based Polyurethane duct reinforced with a steel spiral copper coated. Constant wall thickness of 0,40mm. Properties: Very light and flexible, axially compressible (about 5:1) for easy handling and costs saving in stocking and transporting. The PU-coated spiral allows more bending sessions, thus the duct has good mechanical properties and it is especially suitable for dynamic applications.Resistant to abrasion. Halogens free conform to RoHS and phthalates free. Standards: It can be made electrically bonded by earthing the steel spiral. (For further info regarding Electrical Resistance: The electrical resistance R 102 Ohm/m is according to ISO 8031 - ATEX Directive 94/4/EC and 99/92/EC). REACH Regulation (1907/2006) Temperature Range: -40 degreesC+90 degreesC (+125 degreesC short time)In Stock -
3.0m Length of heavy duty industrial quality PVC flexible dust extraction hose pipe. This flexi hose is abrasion resistant and especially suitable for woodworking machines. L=3000 mmIn Stock€143.90€172.68As low as €146.77
-
6.0m Length of 254 mm diameter PU flexible hose for dust extraction, shavings, vapours, small industrial cleaning and suction plants. Technical Features: Ester based Polyurethane duct reinforced with a steel spiral copper coated. Constant wall thickness of 0,40mm. Properties: Very light and flexible, axially compressible (about 5:1) for easy handling and costs saving in stocking and transporting. The PU-coated spiral allows more bending sessions, thus the duct has good mechanical properties and it is especially suitable for dynamic applications.Resistant to abrasion. Halogens free conform to RoHS and phthalates free. Standards: It can be made electrically bonded by earthing the steel spiral. (For further info regarding Electrical Resistance: The electrical resistance R 102 Ohm/m is according to ISO 8031 - ATEX Directive 94/4/EC and 99/92/EC). REACH Regulation (1907/2006) Temperature Range: -40 degreesC+90 degreesC (+125 degreesC short time)In Stock -
6.0m Length of 508 mm [20"] diameter PU flexible hose for dust extraction, shavings, vapours, small industrial cleaning and suction plants. Technical Features: Ester based Polyurethane duct reinforced with a steel spiral copper coated. Constant wall thickness of 0,40mm. Properties: Very light and flexible, axially compressible (about 5:1) for easy handling and costs saving in stocking and transporting. The PU-coated spiral allows more bending sessions, thus the duct has good mechanical properties and it is especially suitable for dynamic applications.Resistant to abrasion. Halogens free conform to RoHS and phthalates free. Standards: It can be made electrically bonded by earthing the steel spiral. (For further info regarding Electrical Resistance: The electrical resistance R 102 Ohm/m is according to ISO 8031 - ATEX Directive 94/4/EC and 99/92/EC). REACH Regulation (1907/2006) Temperature Range: -40 degreesC+90 degreesC (+125 degreesC short time)Lead Time: 24 Days -
10mtr length of PU 76mm diameter flexible hose for Woodworking industry, cnc router, dust extraction, vapours, small industrial cleaning and suction plants Technical Features: Ester based Polyurethane duct reinforced with a steel spiral copper coated. Constant wall thickness of 0,40mm. Properties: Very light and flexible, axially compressible (about 5:1) for easy handling and costs saving in stocking and transporting. The PU-coated spiral allows more bending sessions, thus the duct has good mechanical properties and it is especially suitable for dynamic applications.Resistant to abrasion. Halogens free conform to RoHS and phthalates free. Standards: It can be made electrically bonded by earthing the steel spiral. (For further info regarding Electrical Resistance: The electrical resistance R 102 Ohm/m is according to ISO 8031 - ATEX Directive 94/4/EC and 99/92/EC). REACH Regulation (1907/2006) Temperature Range: -40 degreesC+90 degreesC (+125 degreesC short time)In Stock -
6.0m Length of 80 mm diameter PU flexible hose for dust extraction, shavings, vapours, small industrial cleaning and suction plants. Technical Features: Ester based Polyurethane duct reinforced with a steel spiral copper coated. Constant wall thickness of 0,40mm. Properties: Very light and flexible, axially compressible (about 5:1) for easy handling and costs saving in stocking and transporting. The PU-coated spiral allows more bending sessions, thus the duct has good mechanical properties and it is especially suitable for dynamic applications.Resistant to abrasion. Halogens free conform to RoHS and phthalates free. Standards: It can be made electrically bonded by earthing the steel spiral. (For further info regarding Electrical Resistance: The electrical resistance R 102 Ohm/m is according to ISO 8031 - ATEX Directive 94/4/EC and 99/92/EC). REACH Regulation (1907/2006) Temperature Range: -40 degreesC+90 degreesC (+125 degreesC short time)In Stock -
6.0m Length of 51 mm diameter PU flexible hose for dust extraction, shavings, vapours, small industrial cleaning and suction plants. Technical Features: Ester based Polyurethane duct reinforced with a steel spiral copper coated. Constant wall thickness of 0,40mm. Properties: Very light and flexible, axially compressible (about 5:1) for easy handling and costs saving in stocking and transporting. The PU-coated spiral allows more bending sessions, thus the duct has good mechanical properties and it is especially suitable for dynamic applications.Resistant to abrasion. Halogens free conform to RoHS and phthalates free. Standards: It can be made electrically bonded by earthing the steel spiral. (For further info regarding Electrical Resistance: The electrical resistance R 102 Ohm/m is according to ISO 8031 - ATEX Directive 94/4/EC and 99/92/EC). REACH Regulation (1907/2006) Temperature Range: -40 degreesC+90 degreesC (+125 degreesC short time)In Stock -
MAXVAC Airhose Ducting is made from ultra tough and endurable can be attached to the outlet of the Dustblocker DB650. This is great for creating positive or negative pressure areas or simply to channel air extraction along a specific route to or away from the machine. The MAXVAC Airhose flexible ducting hose can be used in many industrial air movement applications. These lightweight hoses are made from PVC vinyl coated polyester fabric and has been reinforced with a spring steel wire helix for added strength when flexed. Each section of blue flex duct is constructed with a protective external wear-strip. The protective wear-strip provides an added layer of protection from dragging and scraping the hose material on the ground. 5mtrs x 150mm Also available in other sizes, call us if your size isn't listed or you require a custom size.Lead Time: 15 Days€101.93€122.32As low as €107.64
