Drilling Accessories
(12 Products)-
Trend PH/6X25/500 Pocket hole screw standard No.6 x 25mmLead Time: 5 Days€17.99€21.59As low as €19.43 -
Trend PH/7X25/500C Pocket hole screw coarsse No.7 x 25mmLead Time: 5 Days€17.99€21.59As low as €19.43 -
Trend PH/7X30/500 Thread=standard Size=No.7 (3.9 mm) x 30 mm Material=Steel Finish=Zinc coated . Pack of 500 standard thread square drive self tapping wood screws used with the PH/JIG.Lead Time: 5 Days€19.19€23.03As low as €20.72 -
Trend PH/7X30/500C Thread=coarse Size=No.7 (3.9 mm) x 30 mm Material=Steel Finish=Zinc coated . Pack of 500 coarse thread square drive self tapping wood screws used with the PH/JIG. Ideal for softer timbers, plywood and particle board as thread gives better holding power.Lead Time: 5 Days€26.38€31.66As low as €28.49 -
Trend PH/DRILL/95 Drill diameter=9.5 mm Drill diameter=3/8 inch Pilot diameter=4.2mm Pilot length=13 mm Overall length=155mm . Replacement pocket hole jig stepped drill bit. High Speed Steel.Lead Time: 5 Days€27.58€33.10As low as €29.78 -
Trend PH/DRILL/95Q Diameter=9.5 mm Shank Diameter=1/4 inch hex Pilot diameter=4.2mm Pilot length=13 mm . A 9.5mm diameter stepped High Speed Steel drill for use with Pocket Hole Jigs. Supplied with depth setting collar. Can be fitted to the Quick Chuck or directly into the drill chuck.Lead Time: 5 Days€26.38€31.66As low as €28.49 -
Trend PH/JIG Trend Pocket Hole Jig - Adaptable fast and simple jointing SystemLead Time: 5 Days€123.51€148.21As low as €133.39 -
- Material thickness min. 12.7 mm
- Material thickness max. 38 mm
- Hole pitch 28 to 50 mm
Lead Time: 5 Days€73.15€87.78As low as €79.00 -
Trend PH/JIG/M Material thickness min.=16.0 Material thickness max.=38.0 Material width min.=38.0 Hole pitch=18.0-54 mm Drill diameter=9.5 mm Square drive bit size=No.2 Screw sizes=No.7 x 30 mm . For fast and accurate joining of timber and plywood giving strong instant joints. Supplied with two bases short and long. Long base is used on edge of component, short base allows jointing into corners for refurbishment work. Solid buLead Time: 5 Days€65.95€79.14As low as €71.23 -
Trend PH/PC/95 Overall length=94 mm Shank Diameter=8mm Shank Length=24 mm Plug size=3/8 inch Plug size=9.5 mm Plug length max.=52 mm . Tool steel plug/pellet cutter. Use in a pillar drill to allow plugs to be made to cover the pocket hole pockets. Allows plugs up to 52mm long to be created in end grain. Using the same timber as the project ensures the plug matchesLead Time: 5 Days€40.77€48.92As low as €44.03
