Circular & Table Saw Accessories
(61 Products)Our complete range of Table Saw guards and guides are technically superior safety guarding solutions. A blend of safety, functionality and quality guarantee the long service life of our products. With a broad range of safety guards for saws from SUVA, Aigner & CPS we have a combination of protection and aids to better working practice. We offer reliable protection against occupational accidents and a real aid to safe working practices. In recent years, the use of SUVA safety equipment has demonstrably brought about an enormous reduction in occupational accidents involving woodworking machinery. Suva, CPS & Aigner safety equipment conforms to all EC regulations and is fitted by prestigious European machine tool manufacturers. Existing machinery can be easily be retrofitted
-
How To Determine the thickness of a riving knife for saw blade diameters from 250- 800mm. Diameter shown is the maximum sawblade diameter that can be used These steel riving knives are to DIN specification 38820 and can be correctly adjusted in Suva and DIN riving knife holders. Basic principle:- The riving knife thickness (e) must be less than the width of the cut (B) but at least as thick as the saw blade centre (b). Rule of thumb: e = B+b/2 If the thickness (in mm) required is not available, choose: the next smaller thickness for saw blades with set teeth the next larger thickness for tungsten-carbide-tipped saw bladesIn Stock€99.53€119.44 -
How To Determine the thickness of a riving knife for saw blade diameters from 250- 800mm. Diameter shown is the maximum sawblade diameter that can be used These steel riving knives are to DIN specification 38820 and can be correctly adjusted in Suva and DIN riving knife holders. Basic principle:- The riving knife thickness (e) must be less than the width of the cut (B) but at least as thick as the saw blade centre (b). Rule of thumb: e = B+b/2 If the thickness (in mm) required is not available, choose: the next smaller thickness for saw blades with set teeth the next larger thickness for tungsten-carbide-tipped saw bladesLead Time: 50 Days€99.53€119.44
-
How To Determine the thickness of a riving knife for saw blade diameters from 250- 800mm. Diameter shown is the maximum sawblade diameter that can be used These steel riving knives are to DIN specification 38820 and can be correctly adjusted in Suva and DIN riving knife holders. Basic principle:- The riving knife thickness (e) must be less than the width of the cut (B) but at least as thick as the saw blade centre (b). Rule of thumb: e = B+b/2 If the thickness (in mm) required is not available, choose: the next smaller thickness for saw blades with set teeth the next larger thickness for tungsten-carbide-tipped saw bladesIn Stock€109.12€130.94
-
How To Determine the thickness of a riving knife for saw blade diameters from 250- 800mm. Diameter shown is the maximum sawblade diameter that can be used These steel riving knives are to DIN specification 38820 and can be correctly adjusted in Suva and DIN riving knife holders. Basic principle:- The riving knife thickness (e) must be less than the width of the cut (B) but at least as thick as the saw blade centre (b). Rule of thumb: e = B+b/2 If the thickness (in mm) required is not available, choose: the next smaller thickness for saw blades with set teeth the next larger thickness for tungsten-carbide-tipped saw bladesIn Stock€99.53€119.44
-
Forced riving knife for safer ripping Knife should be wider than saw body but thinner than saw kerfLead Time: 159 Days€133.11€159.73 -
Panhans 300mm Wide blade guard / cover for circular sawLead Time: 159 DaysList €266.94€197.86Inc Vat €237.43 -
Panhans 400mm Wide blade guard / cover for circular sawLead Time: 159 Days€358.55€430.26 -
How To Determine the thickness of a riving knife for saw blade diameters from 250- 800mm. Diameter shown is the maximum sawblade diameter that can be used These steel riving knives are to DIN specification 38820 and can be correctly adjusted in Suva and DIN riving knife holders. Basic principle:- The riving knife thickness (e) must be less than the width of the cut (B) but at least as thick as the saw blade centre (b). Rule of thumb: e = B+b/2 If the thickness (in mm) required is not available, choose: the next smaller thickness for saw blades with set teeth the next larger thickness for tungsten-carbide-tipped saw bladesIn Stock€155.89€187.07
-
How To Determine the thickness of a riving knife for saw blade diameters from 250- 800mm. Diameter shown is the maximum sawblade diameter that can be used These steel riving knives are to DIN specification 38820 and can be correctly adjusted in Suva and DIN riving knife holders. Basic principle:- The riving knife thickness (e) must be less than the width of the cut (B) but at least as thick as the saw blade centre (b). Rule of thumb: e = B+b/2 If the thickness (in mm) required is not available, choose: the next smaller thickness for saw blades with set teeth the next larger thickness for tungsten-carbide-tipped saw bladesIn Stock€155.89€187.07
-
How To Determine the thickness of a riving knife for saw blade diameters from 250- 800mm. Diameter shown is the maximum sawblade diameter that can be used These steel riving knives are to DIN specification 38820 and can be correctly adjusted in Suva and DIN riving knife holders. Basic principle:- The riving knife thickness (e) must be less than the width of the cut (B) but at least as thick as the saw blade centre (b). Rule of thumb: e = B+b/2 If the thickness (in mm) required is not available, choose: the next smaller thickness for saw blades with set teeth the next larger thickness for tungsten-carbide-tipped saw bladesIn Stock€155.89€187.07
-
How To Determine the thickness of a riving knife for saw blade diameters from 250- 800mm. Diameter shown is the maximum sawblade diameter that can be used These steel riving knives are to DIN specification 38820 and can be correctly adjusted in Suva and DIN riving knife holders. Basic principle:- The riving knife thickness (e) must be less than the width of the cut (B) but at least as thick as the saw blade centre (b). Rule of thumb: e = B+b/2 If the thickness (in mm) required is not available, choose: the next smaller thickness for saw blades with set teeth the next larger thickness for tungsten-carbide-tipped saw bladesIn Stock€213.45€256.14
-
How To Determine the thickness of a riving knife for saw blade diameters from 250- 800mm. Diameter shown is the maximum sawblade diameter that can be used These steel riving knives are to DIN specification 38820 and can be correctly adjusted in Suva and DIN riving knife holders. Basic principle:- The riving knife thickness (e) must be less than the width of the cut (B) but at least as thick as the saw blade centre (b). Rule of thumb: e = B+b/2 If the thickness (in mm) required is not available, choose: the next smaller thickness for saw blades with set teeth the next larger thickness for tungsten-carbide-tipped saw bladesLead Time: 50 Days€213.45€256.14
-
- Workpiece height max. 80 mm
- Workpiece length min. 200 mm
- Infeed speed 13 + 26 m/min
Lead Time: 159 Days€4,543.64€5,452.37 -
How To Determine the thickness of a riving knife for saw blade diameters from 250- 800mm. Diameter shown is the maximum sawblade diameter that can be used These steel riving knives are to DIN specification 38820 and can be correctly adjusted in Suva and DIN riving knife holders. Basic principle:- The riving knife thickness (e) must be less than the width of the cut (B) but at least as thick as the saw blade centre (b). Rule of thumb: e = B+b/2 If the thickness (in mm) required is not available, choose: the next smaller thickness for saw blades with set teeth the next larger thickness for tungsten-carbide-tipped saw bladesLead Time: 50 Days€254.22€305.06
-
- Max panel weight 120 kg
- Load capacity: 300 kg,
- Min. height: 400 mm
Lead Time: 93 DaysList €4,745.82€3,583.11Inc Vat €4,299.73 -
Polycarbonate table saw guard - Complete with riving-knife: The Alfa saw guard is designed to fit on riving knives of all types of circular saw bench with a blade diameter from 250 to 315 mm. The guard is supplied complete with a standard 2.8mm riving knife for most applications. This guard is has an intergral 60mm exhaust outlet and deflector for better chip flow. A groove in the front of the guard indicates the cutting line and the special design for the front of the guard allows the guard to be set low accommodating variance in material thickness. Includes FREE push stick. This protection hood can be fitted on the riving-knife in two different positions according to blade diameter: 250mm and 300mm. 2.8MM riving knifeIn StockList €205.78€145.10Inc Vat €174.12 -
CX Series Guards The CX can be fitted to any circular saw. It is available in three versions one for blades up to 450 mm dia, and a throat of 1500 mm (whether fitted with scoring or post-forming) . This version can be offered as standard or as 450Matic - which automatically raises over the work piece. We also now offer a special larger version for blades up to 550 mm with a reduced throat of 900mm. The guards are composed of - a hood covering the blade unit, a supporting arm, a support, a fixing for the machine base. When performing a cut, raise the hood parallel to worktable with the handle, just enough to allow the workpiece to pass underneath. The left side is made of perspex allowing the operator to see the blade and workpiece being cut. The suction 100mm suction outlet, can be connected to the extraction plant - it was designed for maximum performance when hood is completely down, resting against the workpiece surface. We recommend this unit is always used in conjunction with outfeed table support. The units can be fitted to any circular saws with worktable, whether fitted with scoring or post-forming unit.Lead Time: 15 Days€1,882.69€2,259.23 -
The CX can be fitted to any circular saw. It is available in three versions one for blades up to 450 mm dia, and a throat of 1500 mm (whether fitted with scoring or post-forming) . This version can be offered as standard or as 450Matic - which automatically raises over the wor piece. We also now offer a special larger version for blades up to 550 mm with a reduced throat of 900mm. The guards are composed of - a hood covering the blade unit, a supporting arm, a support, a fixing for the machine base. When performing a cut, raise the hood parallel to worktable with the handle, just enough to allow the workpiece to pass underneath. The left side is made of perspex allowing the operator to see the blade and workpiece being cut. The suction 100mm suction outlet, can be connected to the extraction plant - it was designed for maximum performance when hood is completely down, resting against the workpiece surface. We recommend this unit is always used in conjunction with outfeed table support. The units can be fitted to any circular saws with worktable, whether fitted with scoring or post-forming unit.Lead Time: 15 Days€2,140.51€2,568.61 -
The CX550 can be fitted to larger diameter circular saws . It is composed of: a hood covering the blade unit, a supporting arm, a support, a fastener to machine bed. When performing a cut, with the handle raise the hood parallel to worktable just that much to allow the workpiece to pass underneath. The left side is made of transparent material allows the operator to see the blade and the workpiece being cut. The suction outlet 100mm outlet, can be connected with the extraction plant, was conceived so to ensure maximum performance when hood is completely down, resting against the workpiece surface. Maximum Saw Diameter - 550mm Dust Connection - 120 mm Maximum material to be passed between saw blade and upright support - 900 mmLead Time: 15 DaysList €2,103.82€1,712.41Inc Vat €2,054.89 -
Panhans Wide saw blade guard dust extraction connection - for 800mm hoseLead Time: 159 Days€55.16€66.19 -
The iTECH Safety 315 Saw Guard is a replacement table saw guard that sets the benchmark for riving knife mounted safety on saw benches and panel saws with blades up to 315mm. This guard rises and falls with the sawblade height adjustment so as to reduce blade exposure, this combined with gravity side covers improves the protection for the operator. The transparent casing enables the operator to see the blade clearly. The integrated dust port and more enclosed design imporives and enhances extraction from the saw to make your workshop environment cleaner and safer. The kit includes Guard and 2.8mm Riving Knife and is suitable for blades up to 315mm diameter. Outlet size 42mm * If for use on SEGA300 please contact us in advance as slightly different riving knife will be supplied.In Stock -
Ultra-Safe Overhead Saw Guard Specification: The Ultra-Safe Overhead Saw Guard is a key component of the Dado Pro Package Saw, designed to offer superior safety without compromising on precision or visibility during operations. This innovative guard system is tailored to enhance the user experience by providing robust protection and adaptability across various woodworking tasks. Key Features: - Model: Mobile Overhead Crown Guard (M-CG) - Compatibility: Engineered to accommodate saw blades ranging from 200mm to 305mm in diameter, making it versatile for different cutting tasks and saw types. - Adjustability: Features a wide range of height adjustments to suit worktable heights from 800mm to 930mm, ensuring optimal alignment and safety for users of different statures and work preferences. - Ease of Use: The crown guard can be easily raised or lowered, allowing for quick adjustments between tasks without compromising safety or efficiency. - Clamping Mechanism: Securely clamps onto the worktable, providing a stable and safe guarding solution that stays in place during cutting operations. - Dust Management: Includes a dust outlet with a diameter of 63mm, which can be adapted to a 100mm reducer union, facilitating efficient dust extraction and maintaining a clean working environment. - Safety Coverage: The guard's design is not only wide enough to cover saw blades up to 305mm but also ensures clear visibility, so operators can perform precise cuts while being protected from flying debris and dust. - Distance Accommodation: Suitable for a distance from the saw blade to the edge of the rightest table ranging between 640mm and 1415mm, offering flexibility in handling larger pieces of wood or materials.In StockList €661.94€489.26Inc Vat €587.11 -
- Suitable for both 90 degree and 45 degree cuts Yes
- Idle infeed outfeed wheels Yes
- Max blade diameter (mm) 450
Lead Time: 200 DaysList €1,007.30€778.26Inc Vat €933.91 -
Electronic Digital Rip Fence Upgrade kit for your table saw or panel saw + includes etched metal scale including rip fence bar, fine adjuster, complete with magnetic band and mounting rail. Length of bar 1460mm, length of fence 1250mm, bar diameter 50mm. Bolts are M15, they sit 30mm below the table. Compatible with SEGA315 Packed size 150 x 28 x 18cm, 38kgLead Time: 200 DaysList €1,007.30€778.26Inc Vat €933.91 -
iTECH mitre fence for sliding table panel saw with turnover stop and angle graduation tape to make small mite ecuts easier. Can be adapted for other makes and models Length of extrusion 900mm T Slot piece for mounting 90 x 30mm Complete with one turnover stop, non-telescopicIn StockList €410.11€83.94Inc Vat €100.73 -
Dust extraction crown guard kit will fit all 63mm outlet riving knife crown guards. Consists of the following: 1 x Short length of 63mm PVC Hose 2 x HD Jubilee clip 63mm [AD3MS63] 1 x 100mm-63mm Reducer 1 x HD Jubilee Clip 100mm [AD5MS100] (riving knife crown guard not supplied)In Stock€70.75€84.90 -
Over head guard assembly with extraction port designed for PS315X / PS400 sliding table saws but can be modified to suit others. Supplied with narrow and wide guard.. Maximum blade size 400mm + scoring Throat size 1400mm Dust outlet diameter 80mm Box section 60mm x 60mm Vertical 'opening' between horizontals 470mmLead Time: 200 Days€ Enquire -
Panhans table saw guard assembly - Size 1 (for small circular saws) Set consisting of: Hood carrier, U attachment adjustable from 450 to 850mm cutting width, with narrow protective hood and transparent cover, for saw blades up to ¢ 300mm and extraction nozzle ¢ 80mm, including adapterLead Time: 159 DaysList €1,938.34€1,439.00Inc Vat €1,726.80 -
Saw Guard for circular saws or table saw with dust outlet - to be mounted onto suitable riving knife Maximum diameter saw 315 mmLead Time: 52 DaysList €70.51€47.97Inc Vat €57.56 -
How To Determine the thickness of a riving knife for saw blade diameters from 250- 800mm. Diameter shown is the maximum sawblade diameter that can be used These steel riving knives are to DIN specification 38820 and can be correctly adjusted in Suva and DIN riving knife holders. Basic principle:- The riving knife thickness (e) must be less than the width of the cut (B) but at least as thick as the saw blade centre (b). Rule of thumb: e = B+b/2 If the thickness (in mm) required is not available, choose: the next smaller thickness for saw blades with set teeth the next larger thickness for tungsten-carbide-tipped saw bladesIn Stock€134.31€161.17
-
How To Determine the thickness of a riving knife for saw blade diameters from 250- 800mm. Diameter shown is the maximum sawblade diameter that can be used These steel riving knives are to DIN specification 38820 and can be correctly adjusted in Suva and DIN riving knife holders. Basic principle:- The riving knife thickness (e) must be less than the width of the cut (B) but at least as thick as the saw blade centre (b). Rule of thumb: e = B+b/2 If the thickness (in mm) required is not available, choose: the next smaller thickness for saw blades with set teeth the next larger thickness for tungsten-carbide-tipped saw bladesIn Stock€134.31€161.17
-
How To Determine the thickness of a riving knife for saw blade diameters from 250- 800mm. Diameter shown is the maximum sawblade diameter that can be used These steel riving knives are to DIN specification 38820 and can be correctly adjusted in Suva and DIN riving knife holders. Basic principle:- The riving knife thickness (e) must be less than the width of the cut (B) but at least as thick as the saw blade centre (b). Rule of thumb: e = B+b/2 If the thickness (in mm) required is not available, choose: the next smaller thickness for saw blades with set teeth the next larger thickness for tungsten-carbide-tipped saw bladesIn Stock€134.31€161.17
-
How To Determine the thickness of a riving knife for saw blade diameters from 250- 800mm. Diameter shown is the maximum sawblade diameter that can be used These steel riving knives are to DIN specification 38820 and can be correctly adjusted in Suva and DIN riving knife holders. Basic principle:- The riving knife thickness (e) must be less than the width of the cut (B) but at least as thick as the saw blade centre (b). Rule of thumb: e = B+b/2 If the thickness (in mm) required is not available, choose: the next smaller thickness for saw blades with set teeth the next larger thickness for tungsten-carbide-tipped saw bladesIn Stock€134.31€161.17
-
How To Determine the thickness of a riving knife for saw blade diameters from 250- 800mm. Diameter shown is the maximum sawblade diameter that can be used These steel riving knives are to DIN specification 38820 and can be correctly adjusted in Suva and DIN riving knife holders. Basic principle:- The riving knife thickness (e) must be less than the width of the cut (B) but at least as thick as the saw blade centre (b). Rule of thumb: e = B+b/2 If the thickness (in mm) required is not available, choose: the next smaller thickness for saw blades with set teeth the next larger thickness for tungsten-carbide-tipped saw bladesLead Time: 50 Days€ Enquire
-
CMT part no:299.112.00M Before starting a saw project, balance your CMT blade in your table saw with the CMT balance blade & Sanding Disk. Mount the balance blade & sanding disk in your table saw and line it up with a square for accuracy. Remove the balance blade and mount your saw blade for true and precise cuts. Or use the balance blade & sanding disk as a sander by attaching a self-stick sandpaper disk to the balance blade and installing it in your table saw. Please note sandpaper is not includedIn Stock -
CMT part no:299.112.00 If you're looking for fast and easy saw alignment and balancing, the cut calibration and sanding disk is for you. First, mount your calibration and sanding disk in your table saw and line it up with a square for accuracy. Then, remove the calibration and sanding disk and mount your saw blade for true precise cuts. You can also use the calibration and sanding disk as a sander by simply attaching self-stick sandpaper and installing the disk in your table saw Please note sandpaper is not includedLead Time: 12 Days -
CMT part no:299.111.00M Sanding disc set for table saw If you're looking for fast and easy saw alignment and balancing, the cut calibration and sanding disk is for you. First, mount your calibration and sanding disk in your table saw and line it up with a square for accuracy. Then, remove the calibration and sanding disk and mount your saw blade for true precise cuts. You can also use the calibration and sanding disk as a sander by simply attaching self-stick sandpaper and installing the disk in your table saw Please note sandpaper is not includedIn Stock -
CMT part no:299.111.00 Sanding disc set for table saw If you're looking for fast and easy saw alignment and balancing, the cut calibration and sanding disk is for you. First, mount your calibration and sanding disk in your table saw and line it up with a square for accuracy. Then, remove the calibration and sanding disk and mount your saw blade for true precise cuts. You can also use the calibration and sanding disk as a sander by simply attaching self-stick sandpaper and installing the disk in your table saw Please note sandpaper is not includedLead Time: 12 Days -
D=250/315 TH=2,8 RIVING KNIFE Item code: 0526139085DLead Time: 111 Days€231.44€277.73 -
RIVING KNIFE FOR SAW BLADE D=250-300 THICKNESS=2.8 Item code: 0526139070BLead Time: 111 Days€236.24€283.49 -
high quality spare eccentric work piece clamp for sliding table saws and spindle moulders with 30 x 50 mm T nut for sliding table slot, and a 12mmx15mm bolt at the end of shaft. This clamp fits most popular saws with aluminium sliding tables including SCM, Altendorf etc and can easily be adapted to suit if the T-Slot is different.In StockList €142.46€106.73Inc Vat €128.08
